Hi all,
I'm trying to set up a transparent traffic shaper using tc and a linux
bridge. I'm having certain problems with this, namely because I cannot make
up tc filters based on ip addresses or protocols.
I'll try to illustrate the (proposed) setup:
|Internet
|
|
+--------+---------+
| Router |
+--------+---------+
|
|
|
| eth0
+--------+---------+
| Linux Bridge |
+---+---------+----+
| eth1 | eth2
| |
| |
Basically, the purpose is to shape the traffic based on whether the
destination/source of the packet is either eth1 or eth2. traffic from/to eth1
shall be limited to 64 kBit/s, traffic from/to eth2 to 1 Mbit/s.
As the bridge is supposed to be transparent, no routing shall take place.
That also implies that filters cannot be added based on ip addresses or
networks.
Is it possible to shape the traffic just based on the outgoing interface?
Please Cc: me in a reply, as I'm not currently subscribed to the list.
best regards,
Matthias
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
