Hi,
When trying to use the bridge_util command brctl addbr brg0, I get
the Bad address error.
The details from the log files are listed below.
Can anyone point out where the problem is?
Chris Hailes
Budgewoi NSW
Australia
# brctl addbr brg0
br_add_bridge: Bad address
Kernel linux 2.2.17
linux_brfw_2.2.17.diff
bridge-utils-0.9.2.tgz
dmesg | grep -I bridge
NET4: Ethernet Bridge 007 for NET4.0
brg0: network interface for Ethernet Bridge 007/NET4.0
brg0: attached to bridge instance 0
Sep 19 04:48:21 spud kernel: SCSI device sdb: hdwr sector= 512 bytes.
Sectors= 8813870 [4303 MB] [4.3 GB]
Sep 19 04:48:21 spud kernel: NET4: Ethernet Bridge 007 for NET4.0
Sep 19 04:48:21 spud kernel: early initialization of device brg0 is deferred
Sep 19 04:48:21 spud kernel: brg0: network interface for Ethernet Bridge
007/NET4.0
Sep 19 04:48:21 spud kernel: brg0: generated MAC address FE:FD:08:18:23:37
Sep 19 04:48:21 spud kernel: brg0: attached to bridge instance 0
Sep 19 04:48:21 spud kernel: Partition check:
Sep 19 04:48:21 spud kernel: wd.c:v1.10 9/23/94 Donald Becker
([EMAIL PROTECTED])
Sep 19 04:48:21 spud kernel: eth0: WD80x3 at 0x300, 00 00 C0 30 62 B3
WD8013, IRQ 5, shared memory at 0xd0000-0xd3fff.
Sep 19 04:48:21 spud kernel: smc-ultra.c:v2.02 2/3/98 Donald Becker
([EMAIL PROTECTED])
Sep 19 04:48:21 spud kernel: eth1: SMC Ultra at 0x280, 00 00 C0 63 23 B9,
IRQ 3 memory 0xc8000-0xcbfff.
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
