Hi, You're using the old bridge code (didn't apply the patch). brctl is the control tool for the new bridge code.
cheers, Lennert On Sat, Oct 13, 2001 at 10:05:25PM +1000, Chris Hailes wrote: > Hi, > When trying to use the bridge_util command brctl addbr brg0, I get > the Bad address error. > The details from the log files are listed below. > Can anyone point out where the problem is? > > Chris Hailes > Budgewoi NSW > Australia > > > # brctl addbr brg0 > br_add_bridge: Bad address > > Kernel linux 2.2.17 > linux_brfw_2.2.17.diff > bridge-utils-0.9.2.tgz > > dmesg | grep -I bridge > NET4: Ethernet Bridge 007 for NET4.0 > brg0: network interface for Ethernet Bridge 007/NET4.0 > brg0: attached to bridge instance 0 > > > Sep 19 04:48:21 spud kernel: SCSI device sdb: hdwr sector= 512 bytes. > Sectors= 8813870 [4303 MB] [4.3 GB] > Sep 19 04:48:21 spud kernel: NET4: Ethernet Bridge 007 for NET4.0 > Sep 19 04:48:21 spud kernel: early initialization of device brg0 is deferred > Sep 19 04:48:21 spud kernel: brg0: network interface for Ethernet Bridge > 007/NET4.0 > Sep 19 04:48:21 spud kernel: brg0: generated MAC address FE:FD:08:18:23:37 > Sep 19 04:48:21 spud kernel: brg0: attached to bridge instance 0 > Sep 19 04:48:21 spud kernel: Partition check: > > Sep 19 04:48:21 spud kernel: wd.c:v1.10 9/23/94 Donald Becker > ([EMAIL PROTECTED]) > Sep 19 04:48:21 spud kernel: eth0: WD80x3 at 0x300, 00 00 C0 30 62 B3 > WD8013, IRQ 5, shared memory at 0xd0000-0xd3fff. > Sep 19 04:48:21 spud kernel: smc-ultra.c:v2.02 2/3/98 Donald Becker > ([EMAIL PROTECTED]) > Sep 19 04:48:21 spud kernel: eth1: SMC Ultra at 0x280, 00 00 C0 63 23 B9, > IRQ 3 memory 0xc8000-0xcbfff. > > _______________________________________________ > Bridge mailing list > [EMAIL PROTECTED] > http://www.math.leidenuniv.nl/mailman/listinfo/bridge -- I are sigfile disease!! All your quote are belong to us. Copy us every "sig"! _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
