No idea.. I was sort-of expecting the ATM folks to look into this. rtl8139 for one had a very similar bug a while ago (setting skb->len 4 bytes too high, forgetting to strip the FCS from the byte count)
On Thu, Nov 29, 2001 at 08:12:26PM -0500, Marc Levesque wrote: > And..where I must look for that ? > > On 2001.11.29 09:12 Lennert Buytenhek wrote: > > > Hmm.. perhaps ATM is setting skb->len 2 bytes too high (which would not > > be > > noticed on IP traffic because that explicitly does skb_trim)? > > > > > > On Wed, Nov 28, 2001 at 02:50:49PM -0500, Marc Levesque wrote: > > > > > Hi all, > > > > > > I set a Linux Bridge (ATM-Ethernet) > > > So, on the LANE side, the PC can access PC on the Ethernet side without > > > problem. > > > But, the PC on the Ethernet side, must set the mtu to 1498 to work... > > > > > > Any idea > > > > > > Thanks > > > Marc Levesque > > > [EMAIL PROTECTED] > > > _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
