ok, thanks Lennert So, this is more details about my setup ! Anyone can help ?
I run Redhat 7.2 (kernel 2.4.9-13) atm-linux 2.4.0 I try with 2 ATM cards: Marconi Forerunner LE an HE 155. (Same result) and a 3Com 3c905 on the ethernet side. All the stuff are connected on a Marconi ESX-3000 switch. And try to bridge ATM-Ethernet with the Linux box. My log file give me these error: nicstar0: AAL5 CRC error - PDU size mismatch. nicstar0: AAL5 CRC error. And I have to drop the MTU on the Ethernet side to 1498 to works... The LANE side are ok. Do you think the problem are related to the ESX ? Thank you ! Marc On 2001.12.02 14:50 Lennert Buytenhek wrote: > No idea.. I was sort-of expecting the ATM folks to look into this. > rtl8139 > for one had a very similar bug a while ago (setting skb->len 4 bytes too > high, forgetting to strip the FCS from the byte count) > > > On Thu, Nov 29, 2001 at 08:12:26PM -0500, Marc Levesque wrote: > > > And..where I must look for that ? > > > > On 2001.11.29 09:12 Lennert Buytenhek wrote: > > > > > Hmm.. perhaps ATM is setting skb->len 2 bytes too high (which would > not > > > be > > > noticed on IP traffic because that explicitly does skb_trim)? > > > > > > > > > On Wed, Nov 28, 2001 at 02:50:49PM -0500, Marc Levesque wrote: > > > > > > > Hi all, > > > > > > > > I set a Linux Bridge (ATM-Ethernet) > > > > So, on the LANE side, the PC can access PC on the Ethernet side > without > > > > problem. > > > > But, the PC on the Ethernet side, must set the mtu to 1498 to > work... > > > > > > > > Any idea > > > > > > > > Thanks > > > > Marc Levesque > > > > [EMAIL PROTECTED] > > > > > > _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
