On Sunday 17 February 2002 13:10, [EMAIL PROTECTED] wrote: > Try removing the IP addressess from all your ethernet adaptors that are > bridged, and instead alias them to the brX device. I've found that adding > IPs to the ethernet ports, that are bound to a bridge to break bridging for > some reason. (could be a Linux issue).
I don't have any! I have eth0 being assigned an IP at boot time. It's the only way I can access the box. Then I'm using... brctl addbr br0 brtcl addif eth1 brctl addif eth2 brctl addif eth3 ifconfig br0 216.27.168.203 ...just as the manual says...eth1 and eth3 were all unused previously. -- Casey Allen Shobe [EMAIL PROTECTED] _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
