My bridge machine consits of: Dual PentiumIII 850mhz 2gb RAM Linux 2.4.18 + bridge-nf-0.0.6-against-2.4.18.diff eth0 3com 9* series PCI eth1 Intel Ethernet Pro 100 eth2 Intel Ethernet Pro 100
I have netfilter enabled, bridging enabled, and bridge firealling enabled in the kernel. eth1 and eth2 are set up for bridging. Packets traverse through the bridge, without any problems. However, I cannot filter them. Any IPTABLE rule I set only block for eth0, and prevent my sniffer (tcpdump) from seeing the packets going through the bridge -- but, the traffic passes through without any problem still. I have followed the HOWTO verbatim, and I have had no luck. I have tried various alternative configurations, including trying the 2.2.20 kernel + ipchains for bridging/filtering, which also did nothing. I don't know what else I need to do to troubleshoot this matter. If anyone can help, or needs more information on my configuration than I have provided here before helping me, please let me know what those things are. I apologize for reposting my question(s) on the matter to the list. I've been receiving a lot of replies, off list, along the lines of "RTFM", which aren't constructive in the least -- I have read the documentation and tried everything to no avail, and I could really use some help here now. Thanks in advance, -Mark _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
