You should be using 2.4.18 or later. Get the kernel source from "rawhide" if you prefer RedHat kernels..
and you need to specify the -p argument to patch when patching. Don't remember if this patch is of type -p0 or -p1, but it most likely is a -p1 patch.. (can quite easily be told from the first few lines in the patch file.. see patch program man page on the -p option) Regards Henrik Nordstr�m On Wednesday 03 April 2002 00:49, Wei koong Chai wrote: > Hi... > > I'm a newbie here, so be a bit patient to my "maybe" stupid > questions. Recently, I tried to use the patch > (bridge-nf-0.0.6-against-2.4.18.diff) but encountered some > problems. It seems that the patch and I cannot find some of the > files needed to be patched. I managed to locate the first 3 files > to be patched (netfilter.h, netfilter_ipv4.h, skbuff.h) but > couldn't find all the rest of the files that are to be patched. Am > i missing something? is there anything i didn't install yet? > > Here's the thing i have used currently > [1] bridge-utils-0.9.5.tar.gz > [2] iptables-1.2.5 > > and, my kernel is 2.4.7-10... do i need to use > kernel-2.4.9-21brnf0.0.6.i686.rpm at the download page? do i need > to upgrade my kernel also? > > For your information, i am able to setup and run a bridge > successfully. > > Thank you first. > > regards, > Wei Koong CHAI > CCSR > UniS > UK > > _______________________________________________ > Bridge mailing list > [EMAIL PROTECTED] > http://www.math.leidenuniv.nl/mailman/listinfo/bridge _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
