Hi, the mobile robot I'm working on has 2 PC's (one PC104 and 1 laptop) linked with an ethernet cable (twisted). I want to add a pcmcia card on the PC104 stack for adding wireless communication capabilities (I'll have the eth0 and eth1 interfaces on the pc104). So I need to enable bridging support on the PC104 and purchase a pcmcia card with bridging capabilities (?). My questions are :
Wich model of wireless pcmcia card should I use ? Which brands do you recommend ? Is the prism chipset mandatory to make it work ? Do I have to change the firmware of the card to make it work and how can I do that ? Has anybody succeeded in doing that kind of things ? Thanks a lot for your advices. Best ~Pierre PS : Kernel 2.4.18, RH 7.2 ______________________________________ Pierre Lamon Swiss Federal Institute of Technology EPFL-IIS-LSA1 CH-1015 Lausanne ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
