hello all.
I have some questions about bridge firewall.
1. Do you know any commercial firewall solutions using bridging firewall instead of nat?
2. some documents say that the performance of the bridge is better than nat because that the bridge is layer 2 and nat is layer 3, right?
3. I have 3 C classes network. and the ip address range of the host which is in the bridge network is not alike. some host is 211.1.1.1, 211.1.2.1 211.1.3.1 (netmaks is 255.255.255.0) is it available?
4. what is the stp problem? and how can I solve this problem?
5. in bridging, can I use mangle table or not?
if i set the ip address at the br interface, then I should use INPUT and FORWARD chain?
6. any available problem when I operating bridge firewall?
Thanks in advance.
_________________________________________________________________
���� ������ ���� ���� ����. ������ ȭ���� MSN �������� Ȯ���ϼ���. http://www.msn.co.kr/news/
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
