Hi,
I checked, the error was due to some proxy issues. I can now get it done.
Also, I've shared the rough draft of the proposal for your reviews. Do let
me know the changes to be incorporated in it. I'd need a bit more detailed
tasks on BREP support and BOT plate mode for me to understand and write it
in the proposal accordingly.
Warm Regards,
*Sreyansh Kumhar Jain*
4th Year Undergraduate Student
Department of Mechanical Engineering
Indian Institute of Technology, Kharagpur
*+91-9933958066*
sreyanshjai...@gmail.com
Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
<https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
On Mon, Mar 19, 2018 at 4:35 AM, Sreyansh Jain <sreyanshjai...@gmail.com>
wrote:
> I've added the clinfo output in the attachment.
>
> I think I've tracked it down to being unable to link rt with OpenCL
> library. While running "svn co svn://svn.code.sf.net/p/
> brlcad/code/brlcad/trunk/ brlcad" as mentioned here
> <https://brlcad.org/wiki/Compiling>, it gave the following error:
> svn: E170013: Unable to connect to a repository at URL 'svn://
> svn.code.sf.net/p/brlcad/code/brlcad/trunk'
> svn: E000111: Error running context: Connection refused
>
>
> Warm Regards,
>
> *Sreyansh Kumhar Jain*
> 4th Year Undergraduate Student
> Department of Mechanical Engineering
> Indian Institute of Technology, Kharagpur
> *+91-9933958066*
>
> sreyanshjai...@gmail.com
> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>
> On Sun, Mar 18, 2018 at 5:47 AM, Vasco Alexandre da Silva Costa <
> vasco.co...@gmail.com> wrote:
>
>> PS: Please attach the output of clinfo to your message, that might help
>> find out the problem.
>>
>> If OpenCL is correctly configured and installed and rt still doesn't use
>> it, either you didn't enable OpenCL in rt at runtime (i.e. 'rt -z1'), or
>> you compiled 'rt' without OpenCL support. If you 'ldd' the 'rt' binary it
>> should be linked to the libOpenCL library. If it isn't linked with the
>> library you need to re-run cmake, enable the appropriate options (i.e.
>> cmake .. -DBRLCAD_BUNDLED_LIBS=ON -DCMAKE_BUILD_TYPE=Release
>> -DBRLCAD_ENABLE_OPENCL=ON), and recompile the code.
>>
>> On Sun, Mar 18, 2018 at 12:01 AM, Vasco Alexandre da Silva Costa <
>> vasco.co...@gmail.com> wrote:
>>
>>> Make sure to start 'rt' with the '-z1' flag. This should enable OpenCL
>>> mode.
>>> You should be able to see OpenCL debug messages on the console in that
>>> case.
>>>
>>>
>>>
>>> On Sat, Mar 17, 2018 at 9:35 PM, Sreyansh Jain <sreyanshjai...@gmail.com
>>> > wrote:
>>>
>>>> I checked with clinfo and I've OpenCL installed properly. How do I
>>>> check if it is working during MGED commands?
>>>>
>>>>
>>>>
>>>> Warm Regards,
>>>>
>>>> *Sreyansh Kumhar Jain*
>>>> 4th Year Undergraduate Student
>>>> Department of Mechanical Engineering
>>>> Indian Institute of Technology, Kharagpur
>>>> *+91-9933958066 <+91%2099339%2058066>*
>>>>
>>>> sreyanshjai...@gmail.com
>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>
>>>> On Sat, Mar 17, 2018 at 10:42 PM, Vasco Alexandre da Silva Costa <
>>>> vasco.co...@gmail.com> wrote:
>>>>
>>>>> Probably. Did you try the clinfo command I mentioned before?
>>>>> https://github.com/simleb/clinfo
>>>>>
>>>>> If clinfo doesn't show OpenCL installed there may be a configuration
>>>>> or installation issue.
>>>>>
>>>>> BTW this is the OpenCL version I use:
>>>>> https://developer.amd.com/amd-accelerated-parallel-processing-app-sdk/
>>>>>
>>>>> It's made by AMD but it runs on any x86 processor, Intel or AMD.
>>>>> Try these. If you still have issues then we can talk.
>>>>>
>>>>> On Sat, Mar 17, 2018 at 10:20 AM, Sreyansh Jain <
>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>
>>>>>> I think I'm missing something trivial and thus having problems in
>>>>>> initializing ocl itself. I tried doing the same things with other
>>>>>> primitives(ell, hyp etc.) to get the same kinda results. Can we have a
>>>>>> quick Skype call to discuss the same ?
>>>>>>
>>>>>> ------------------------------------------------------------
>>>>>> ------------------
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>> _______________________________________________
>>>>>> BRL-CAD Developer mailing list
>>>>>> brlcad-devel@lists.sourceforge.net
>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Vasco Alexandre da Silva Costa
>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>
>>>>> ------------------------------------------------------------
>>>>> ------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> BRL-CAD Developer mailing list
>>>>> brlcad-devel@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>
>>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> BRL-CAD Developer mailing list
>>>> brlcad-devel@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>
>>>>
>>>
>>>
>>> --
>>> Vasco Alexandre da Silva Costa
>>> PhD in Computer Engineering (Computer Graphics)
>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>
>>
>>
>>
>> --
>> Vasco Alexandre da Silva Costa
>> PhD in Computer Engineering (Computer Graphics)
>> Instituto Superior Técnico/University of Lisbon, Portugal
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> BRL-CAD Developer mailing list
>> brlcad-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>
>>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
brlcad-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
