Test with one of the already existing OpenCL primitives like 'ell' to see
if that works. Just in case there's an issue somewhere else in the pipeline.
I'll try to take a look at your code this week.
On Sat, May 26, 2018 at 9:08 PM, Sreyansh Jain <[email protected]>
wrote:
> Thanks, that's done!
>
> I wanted to confirm if simply changing code in build directory would work
> or do we have to recompile with cmake again for changes to be implemented?
>
> I've made all the necessary changes as in patch file and the code also
> doesn't seem to have any error. I've tried many things, but still I'm not
> getting its openCL rendering as expected (blank .png image, basically). Can
> you please check with updated superell_OCL.patch and let me know where I
> went wrong?
>
>
> Warm Regards,
>
> *Sreyansh Kumhar Jain*
> 4th Year Undergraduate Student
> Department of Mechanical Engineering
> Indian Institute of Technology, Kharagpur
> *+91-9933958066*
>
> [email protected]
> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>
> On Wed, May 23, 2018 at 9:50 PM, Vasco Alexandre da Silva Costa <
> [email protected]> wrote:
>
>> The BVH algorithm is implemented in 'bot' for example:
>> https://svn.code.sf.net/p/brlcad/code/brlcad/trunk/src/librt
>> /primitives/bot/bot_shot.cl
>>
>> Here you have some more links on your question. This should have been
>> covered in your introductory CS classes though:
>> https://en.wikipedia.org/wiki/Recursion_(computer_science)#R
>> ecursion_versus_iteration
>> https://en.wikipedia.org/wiki/Call_stack
>>
>> You can also check out Stack Overflow for doubts on things like this:
>> https://stackoverflow.com/questions/15688019/recursion-versus-iteration
>>
>> On Tue, May 22, 2018 at 2:27 AM, Sreyansh Jain <[email protected]>
>> wrote:
>>
>>> I don't have any experience of working with stack. I'm looking into it.
>>> In which files can I exactly find this BVH algorithm implemented in C and
>>> OpenCL?
>>>
>>> Also, I'll submit the patches for HYP and ARBN by tonight for you to
>>> review in case I'm going wrong somewhere. I'll work on their optimisation
>>> later, as per my project plan.
>>>
>>> Warm Regards,
>>>
>>> *Sreyansh Kumhar Jain*
>>> 4th Year Undergraduate Student
>>> Department of Mechanical Engineering
>>> Indian Institute of Technology, Kharagpur
>>> *+91-9933958066*
>>>
>>> [email protected]
>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>
>>> On Sun, May 20, 2018 at 5:41 AM, Vasco Alexandre da Silva Costa <
>>> [email protected]> wrote:
>>>
>>>> Once you have code, you can submit a patch to the patches section at
>>>> SourceForge.net and ask for us to review it.
>>>>
>>>> Typically, any recursive algorithm can be replaced with an iterative
>>>> algorithm with a loop and a stack. We do this in the BVH intersection
>>>> algorithm for example.
>>>>
>>>>
>>>> On Fri, May 18, 2018 at 9:07 PM, Sreyansh Jain <
>>>> [email protected]> wrote:
>>>>
>>>>> Hey, thanks. I'll look into it.
>>>>>
>>>>> For the DSP code, I had a few doubts regarding how to approach the
>>>>> recursion of isect_ray_dsp_bb() for its children and also for the
>>>>> add_seg()
>>>>> function. How do you propose I get it reviewed by you?
>>>>>
>>>>> Warm Regards,
>>>>>
>>>>> *Sreyansh Kumhar Jain*
>>>>> 4th Year Undergraduate Student
>>>>> Department of Mechanical Engineering
>>>>> Indian Institute of Technology, Kharagpur
>>>>> *+91-9933958066*
>>>>>
>>>>> [email protected]
>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>
>>>>> On Thu, May 17, 2018 at 5:51 AM, Vasco Alexandre da Silva Costa <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> In case you still have issues with your development environment
>>>>>> setup, I have made this virtual disk image:
>>>>>> https://mega.nz/#!za5GASRZ!t8jkYok9_6Jg9j5Evga0UESaMZ3H46gHY
>>>>>> YhuwcjHg9M
>>>>>>
>>>>>> The file is compressed with 7-zip. You can run the Virtual Disk Image
>>>>>> (.vdi) inside Virtual Box. The .vdi includes Ubuntu 18.04, BRL-CAD
>>>>>> r70379, and all the dependencies (including X11, OpenGL, OpenCL). It
>>>>>> also includes a compiled version of BRL-CAD which has working OpenCL
>>>>>> support.
>>>>>>
>>>>>> username: public
>>>>>> password: public
>>>>>>
>>>>>> The BRL-CAD sources are located in '~/brlcad'.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>>
>>>>>> On Wed, May 16, 2018 at 4:06 PM, Vasco Alexandre da Silva Costa <
>>>>>> [email protected]> wrote:
>>>>>>
>>>>>>> Yes -z1 is supposed to enable OpenCL mode if it's compiled in.
>>>>>>> Make sure you install the appropriate package dependencies. Besides
>>>>>>> the ones I cited before, check out the INSTALL guide in the BRL-CAD
>>>>>>> Wiki:
>>>>>>> http://brlcad.org/wiki/Compiling
>>>>>>>
>>>>>>> On Tue, May 15, 2018 at 7:48 PM, Sreyansh Jain <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I've managed to work out the above problem. I've started working on
>>>>>>>> dsp shot routine.
>>>>>>>> For MGED, I couldn't find anything for -z1 flag in 'man rt'
>>>>>>>> command. What is the exact command for using OpenCL? I tried many but
>>>>>>>> I'm
>>>>>>>> not sure which one is correct, one of them being 'rt -z1 -z -s2048
>>>>>>>> -H32'.
>>>>>>>>
>>>>>>>> Warm Regards,
>>>>>>>>
>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>> 4th Year Undergraduate Student
>>>>>>>> Department of Mechanical Engineering
>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>> *+91-9933958066*
>>>>>>>>
>>>>>>>> [email protected]
>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>
>>>>>>>> On Sat, May 12, 2018 at 9:53 PM, Sreyansh Jain <
>>>>>>>> [email protected]> wrote:
>>>>>>>>
>>>>>>>>> It isn't. It is taking almost the same time for rt -o and rt -z
>>>>>>>>> command. And with rt -z1, raytrace fails.
>>>>>>>>> It isn't compiling Tk, Iwidgets, etc. and so there is no geometry
>>>>>>>>> window coming up.
>>>>>>>>>
>>>>>>>>> Warm Regards,
>>>>>>>>>
>>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>>> 4th Year Undergraduate Student
>>>>>>>>> Department of Mechanical Engineering
>>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>>> *+91-9933958066*
>>>>>>>>>
>>>>>>>>> [email protected]
>>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>>
>>>>>>>>> On Sat, May 12, 2018 at 9:37 PM, Vasco Alexandre da Silva Costa <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> Cool!
>>>>>>>>>> Make sure to send that application log later though. So we can
>>>>>>>>>> see if it's actually using OpenCL mode properly.
>>>>>>>>>>
>>>>>>>>>> On Fri, May 11, 2018 at 7:51 PM, Sreyansh Jain <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> Apparently, I've problem which is stated here:
>>>>>>>>>>> https://sourceforge.net/p/brlcad/discussion/362510/thread/49
>>>>>>>>>>> 279c58/
>>>>>>>>>>>
>>>>>>>>>>> While retracing, I found that the only difference I made was
>>>>>>>>>>> directly using
>>>>>>>>>>> *$ sudo apt install clinfo cmake g++ libx11-dev subversion*
>>>>>>>>>>> instead of
>>>>>>>>>>> *$ sudo bash apt install clinfo cmake g++ libx11-dev subversion*
>>>>>>>>>>> because latter gave this error: */usr/bin/apt: /usr/bin/apt:
>>>>>>>>>>> cannot execute binary file*
>>>>>>>>>>>
>>>>>>>>>>> Rest all commands are exactly the same!
>>>>>>>>>>>
>>>>>>>>>>> Warm Regards,
>>>>>>>>>>>
>>>>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>>>>> 4th Year Undergraduate Student
>>>>>>>>>>> Department of Mechanical Engineering
>>>>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>>>>> *+91-9933958066*
>>>>>>>>>>>
>>>>>>>>>>> [email protected]
>>>>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>>>>
>>>>>>>>>>> On Fri, May 11, 2018 at 12:08 AM, Vasco Alexandre da Silva Costa
>>>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Cool, but make sure to show us an MGED log file with the OpenCL
>>>>>>>>>>>> render mode on.
>>>>>>>>>>>>
>>>>>>>>>>>> BTW, I tested the BRL-CAD OpenCL branch, and, it compiles &
>>>>>>>>>>>> runs on the latest Ubuntu 18.04 LTS with the AMD APP SDK. But the
>>>>>>>>>>>> package
>>>>>>>>>>>> dependencies to get it to recognize X11 and OpenGL are kinda
>>>>>>>>>>>> convoluted.
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, May 9, 2018 at 7:10 PM, Sreyansh Jain <
>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hey, it's working! I started from scratch for everything. Now
>>>>>>>>>>>>> that I've set it up, I'll start working with developing codes and
>>>>>>>>>>>>> their
>>>>>>>>>>>>> performance check simultaneously.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Warm Regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>>>>>>> 4th Year Undergraduate Student
>>>>>>>>>>>>> Department of Mechanical Engineering
>>>>>>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>>>>>>> *+91-9933958066*
>>>>>>>>>>>>>
>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, May 9, 2018 at 10:15 PM, Vasco Alexandre da Silva
>>>>>>>>>>>>> Costa <[email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> In case you have issues with downloading the AMD APP SDK
>>>>>>>>>>>>>> executable, here's a link to the .tar.bz2:
>>>>>>>>>>>>>> https://drive.google.com/open?id=1wFzg1vohDHeebZn14IK12KOhbo
>>>>>>>>>>>>>> dS-zvS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, May 9, 2018 at 2:35 PM, Vasco Alexandre da Silva
>>>>>>>>>>>>>> Costa <[email protected]> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Did you make sure you updated the sources.list and did an
>>>>>>>>>>>>>>> "sudo apt update; sudo apt upgrade"?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Note: Because Ubuntu 17.04 is EOL'ed you'll have to change
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> sources.list to get apt-get to work properly. see:
>>>>>>>>>>>>>>> https://stackoverflow.com/questions/48324701/google-compute-
>>>>>>>>>>>>>>> engine-ubuntu-17-04-zesty-does-no-longer-have-a-release-file
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> As for the AMD APP SDK (OpenCL) download page, yeah it seems
>>>>>>>>>>>>>>> to be broken:
>>>>>>>>>>>>>>> https://community.amd.com/community/devgurus/opencl
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thankfully I had a copy of it around here. I've put it up
>>>>>>>>>>>>>>> here:
>>>>>>>>>>>>>>> https://drive.google.com/open?id=1NZ6Z6j4aRHlZpBrjJHeSwdmu-L
>>>>>>>>>>>>>>> JgEpSa
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, May 9, 2018 at 5:37 AM, Sreyansh Jain <
>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I tried with Ubuntu 17.04 but the error still remains the
>>>>>>>>>>>>>>>> same. I believe it is unable to read *expscan.h* file
>>>>>>>>>>>>>>>> where perplex template is defined. It is showing the same with
>>>>>>>>>>>>>>>> both the
>>>>>>>>>>>>>>>> latest as well as the r70379 version.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> In file included from /usr/brlcad/src/other/stepcode
>>>>>>>>>>>>>>>>> /src/express/express.c:86:0:
>>>>>>>>>>>>>>>>> /usr/brlcad/src/other/stepcode/src/express/parse_data.h:5:5:
>>>>>>>>>>>>>>>>> error: unknown type name ‘perplex_t’
>>>>>>>>>>>>>>>>> perplex_t scanner;
>>>>>>>>>>>>>>>>> ^~~~~~~~~
>>>>>>>>>>>>>>>>> /usr/brlcad/src/other/stepcode/src/express/express.c: In
>>>>>>>>>>>>>>>>> function ‘PARSERrun’:
>>>>>>>>>>>>>>>>> /usr/brlcad/src/other/stepcode/src/express/express.c:621:5:
>>>>>>>>>>>>>>>>> error: unknown type name ‘perplex_t’
>>>>>>>>>>>>>>>>> perplex_t scanner = perplexFileScanner( fp );
>>>>>>>>>>>>>>>>> ^~~~~~~~~
>>>>>>>>>>>>>>>>> src/other/stepcode/src/express
>>>>>>>>>>>>>>>>> /CMakeFiles/express.dir/build.make:529: recipe for target
>>>>>>>>>>>>>>>>> 'src/other/stepcode/src/expres
>>>>>>>>>>>>>>>>> s/CMakeFiles/express.dir/express.c.o' failed
>>>>>>>>>>>>>>>>> make[2]: *** [src/other/stepcode/src/expres
>>>>>>>>>>>>>>>>> s/CMakeFiles/express.dir/express.c.o] Error 1
>>>>>>>>>>>>>>>>> CMakeFiles/Makefile2:4685: recipe for target
>>>>>>>>>>>>>>>>> 'src/other/stepcode/src/express/CMakeFiles/express.dir/all'
>>>>>>>>>>>>>>>>> failed
>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>> [src/other/stepcode/src/express/CMakeFiles/express.dir/all]
>>>>>>>>>>>>>>>>> Error 2
>>>>>>>>>>>>>>>>> Makefile:160: recipe for target 'all' failed
>>>>>>>>>>>>>>>>> make: *** [all] Error 2
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Also, the link you mentioned https://developer.amd.com/amd-
>>>>>>>>>>>>>>>> accelerated-parallel-processing-app-sdk/ doesn't exist as
>>>>>>>>>>>>>>>> of now.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I've started with converting the HYP shot routine and will
>>>>>>>>>>>>>>>> check its performance once my working development environment
>>>>>>>>>>>>>>>> develops.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Also, I went through the instructions to be followed and
>>>>>>>>>>>>>>>> will make it a point to give updates more frequently.
>>>>>>>>>>>>>>>> Meanwhile, I had a
>>>>>>>>>>>>>>>> few queries, both general and specific:
>>>>>>>>>>>>>>>> - For acceptance as mentioned here
>>>>>>>>>>>>>>>> <http://brlcad.org/wiki/Summer_of_Code/Acceptance>, is
>>>>>>>>>>>>>>>> there a specific format (eg. in hard copy) or just a general
>>>>>>>>>>>>>>>> mail in
>>>>>>>>>>>>>>>> writing would do?
>>>>>>>>>>>>>>>> - For daily updates, do I start a new thread with just my
>>>>>>>>>>>>>>>> mentor and org-admin or in the group (also, in gsocax or in
>>>>>>>>>>>>>>>> BRL-CAD
>>>>>>>>>>>>>>>> developer mailing list?)
>>>>>>>>>>>>>>>> - Would you prefer mail or other communication channel for
>>>>>>>>>>>>>>>> daily update? And any preferred timings for interaction?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Warm Regards,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>>>>>>>>>> 4th Year Undergraduate Student
>>>>>>>>>>>>>>>> Department of Mechanical Engineering
>>>>>>>>>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>>>>>>>>>> *+91-9933958066*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> |
>>>>>>>>>>>>>>>> LinkedIn
>>>>>>>>>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Mar 26, 2018 at 8:42 AM, Sreyansh Jain <
>>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> @Sean - Disabling bundled build does help a lot if not
>>>>>>>>>>>>>>>>> completely.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> @Vasco - Thank you for the detailed instructions. While
>>>>>>>>>>>>>>>>> working with r30379 version on Ubuntu 16.04, I got the
>>>>>>>>>>>>>>>>> following few errors
>>>>>>>>>>>>>>>>> as mentioned in the list attached. I've mentioned both 'make'
>>>>>>>>>>>>>>>>> and 'make
>>>>>>>>>>>>>>>>> -j4' results with the hope of better understanding. While I
>>>>>>>>>>>>>>>>> try to tweak
>>>>>>>>>>>>>>>>> the code a bit to make it work (like using expscan.h file
>>>>>>>>>>>>>>>>> content), it
>>>>>>>>>>>>>>>>> somehow leads to even more errors. Any clue? I'll now try
>>>>>>>>>>>>>>>>> doing these on
>>>>>>>>>>>>>>>>> Ubuntu 17.04 the way you mentioned.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Also, since the deadline is approaching regarding the
>>>>>>>>>>>>>>>>> final proposal submission, do let me know if there are any
>>>>>>>>>>>>>>>>> changes to be
>>>>>>>>>>>>>>>>> made in the rough draft I submitted.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Warm Regards,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>>>>>>>>>>> 4th Year Undergraduate Student
>>>>>>>>>>>>>>>>> Department of Mechanical Engineering
>>>>>>>>>>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>>>>>>>>>>> *+91-9933958066*
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> |
>>>>>>>>>>>>>>>>> LinkedIn
>>>>>>>>>>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sat, Mar 24, 2018 at 9:46 AM, Christopher Sean Morrison
>>>>>>>>>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Mar 21, 2018, at 11:22 AM, Sreyansh Jain <
>>>>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I've tried symlinking awk to both gawk(4.1.3) and mawk,
>>>>>>>>>>>>>>>>>> but I still get the same error. I'm using Ubuntu 16.04.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Also, I've made the changes in the proposal. Now that I'm
>>>>>>>>>>>>>>>>>> aware roughly about the tasks to be done, I think it's
>>>>>>>>>>>>>>>>>> better to stick to
>>>>>>>>>>>>>>>>>> either one of BOT plate mode or BREP support. If time
>>>>>>>>>>>>>>>>>> permits, I'll do the
>>>>>>>>>>>>>>>>>> other. I'll do a bit of detailed background study in both
>>>>>>>>>>>>>>>>>> cases to check
>>>>>>>>>>>>>>>>>> which one should be plausible in the given time frame and
>>>>>>>>>>>>>>>>>> update it in the
>>>>>>>>>>>>>>>>>> proposal accordingly.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> There’s apparently some issue with our bundled libpng
>>>>>>>>>>>>>>>>>> sources on your system. Does disabling bundled build work?
>>>>>>>>>>>>>>>>>> We usually
>>>>>>>>>>>>>>>>>> recommend bundled for simplicity, but the default should
>>>>>>>>>>>>>>>>>> work too.
>>>>>>>>>>>>>>>>>> Delete/Recreate your build directory, then reconfigure:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> cd to the brlcad sources directory
>>>>>>>>>>>>>>>>>> rm -rf build
>>>>>>>>>>>>>>>>>> mkdir build
>>>>>>>>>>>>>>>>>> cd build
>>>>>>>>>>>>>>>>>> cmake .. -DCMAKE_BUILD_TYPE=Release
>>>>>>>>>>>>>>>>>> -DBRLCAD_ENABLE_OPENCL=ON
>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Cheers!
>>>>>>>>>>>>>>>>>> Sean
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>> ------------------------------------------------
>>>>>>>>>>>>>>>>>> Check out the vibrant tech community on one of the
>>>>>>>>>>>>>>>>>> world's most
>>>>>>>>>>>>>>>>>> engaging tech sites, Slashdot.org!
>>>>>>>>>>>>>>>>>> http://sdm.link/slashdot
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>> ------------------------------------------------
>>>>>>>>>>>>>>>> Check out the vibrant tech community on one of the world's
>>>>>>>>>>>>>>>> most
>>>>>>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Vasco Alexandre da Silva Costa
>>>>>>>>>>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>>>>>>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Vasco Alexandre da Silva Costa
>>>>>>>>>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>>>>>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ------------------------------------------------------------
>>>>>>>>>>>>>> ------------------
>>>>>>>>>>>>>> Check out the vibrant tech community on one of the world's
>>>>>>>>>>>>>> most
>>>>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ------------------------------------------------------------
>>>>>>>>>>>>> ------------------
>>>>>>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Vasco Alexandre da Silva Costa
>>>>>>>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>>>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>>>>>>>
>>>>>>>>>>>> ------------------------------------------------------------
>>>>>>>>>>>> ------------------
>>>>>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ------------------------------------------------------------
>>>>>>>>>>> ------------------
>>>>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Vasco Alexandre da Silva Costa
>>>>>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>>>>>
>>>>>>>>>> ------------------------------------------------------------
>>>>>>>>>> ------------------
>>>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>>> _______________________________________________
>>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------------------------------
>>>>>>>> ------------------
>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>> _______________________________________________
>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>> [email protected]
>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Vasco Alexandre da Silva Costa
>>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Vasco Alexandre da Silva Costa
>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>
>>>>>> ------------------------------------------------------------
>>>>>> ------------------
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>> _______________________________________________
>>>>>> BRL-CAD Developer mailing list
>>>>>> [email protected]
>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>
>>>>>>
>>>>>
>>>>> ------------------------------------------------------------
>>>>> ------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> BRL-CAD Developer mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Vasco Alexandre da Silva Costa
>>>> PhD in Computer Engineering (Computer Graphics)
>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> BRL-CAD Developer mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>
>>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> BRL-CAD Developer mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>
>>>
>>
>>
>> --
>> Vasco Alexandre da Silva Costa
>> PhD in Computer Engineering (Computer Graphics)
>> Instituto Superior Técnico/University of Lisbon, Portugal
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> BRL-CAD Developer mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> BRL-CAD Developer mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>
>
--
Vasco Alexandre da Silva Costa
PhD in Computer Engineering (Computer Graphics)
Instituto Superior Técnico/University of Lisbon, Portugal
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
