[quoted lines by Hammer Attila on 2024/12/31 at 11:47 +0100] >Oh, still missing the log files the required values? this is interesting.
I wasn't reading the log file properly. The 300ms ready delay is indeed there. >I will looking FS Braille parameters related option the /etc/brltty.conf file, No, there aren't any. Those are driver parameters. Adding things like +baud= to the device identifier are device parameters, which brltty.conf doesn't document. >In my Ubuntu 20.04 system, the FS driver braille parameters is following, >this system I absolute sure changed this line this variant older time: > >#braille-parameters fs:Device=/dev/ttyACM0 # [no,yes] There is no such fs driver parameter. >What can I need searching the future logs, and what FS BRAILLE-parameters and >command line parameters need absolute sure producing this values the log file >with you searching? Just as you've already been doing. What I'd like to know is how long the ready delay needs to be for 57600 baud to successfully take effect. -- I believe the Bible to be the very Word of God: http://Mielke.cc/bible/ Dave Mielke | 2213 Fox Crescent | WebHome: http://Mielke.cc/ EMail: [email protected] | Ottawa, Ontario | Twitter: @Dave_Mielke Phone: +1 613 726 0014 | Canada K2A 1H7 | http://mielke.cc/xmother.html (Letter from a Feminist ex-Mother) _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.app/mailman/listinfo/brltty
