Hi Jason Sorry. here come more details: my display is connected serial to usb with the computer, because that laptop doesn't have a serial port. No error messages have appeared so far but it doesn't find the display automatically. I then tried different things out, but couldn't get it to work. is this specific enough? :-) cheers, Moritz ----- Original Message ----- From: "Jason White" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, June 03, 2008 1:54 PM Subject: Re: [BRLTTY] display configuration problems
> On Tue, Jun 03, 2008 at 01:38:37PM +0200, Moritz wrote: >> Hi all I wrote some time ago to the list because I wanted to configure my >> Baum vario 40 Display to my laptop. I'm trying it now with Debian etch. >> It >> still doesn't work. > > If you are connecting the braille display over USB, it should work > automatically as soon as BRLTTY starts. If you are using a serial > interface, > you'll have to specify the serial port in the BRLTTY configuration or on > the > command line. If you're using bluetooth, you'll have more work to do. > > Please be more specific about how the braille display is connected, what > error > messages you are getting, and what isn't working. > > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
