On Sat, 20 Mar 2010 17:25:03 -0400 Dave Mielke <[email protected]> wrote:
... >> with the library present at compile time, i get this error, >> brltty: checking braille device: bluetooth:10:00:E8:65:51:0E >> brltty: checking for braille driver: eu >> brltty: initializing braille driver: eu -> bluetooth:10:00:E8:65:51:0E >> brltty: RFCOMM socket connect error 111: Connexion refus=E9e. > This means that the device wasn't offering any service on the Bluetooth > channel being used by brltty's eu driver. One possibility is that the device > wasn't switched to Bluetooth mode. Another is that the eu driver is using > the wrong channel. Please send us (an attachment is fine) > the output from an sdptool browse of the device's Bluetooth address. Hi Dave, here is the report of sdptool Thanks for your help. Best regards Raoul [email protected] ========== Inquiring ... Browsing 10:00:E8:65:51:0E ... Service Name: COM1 Service RecHandle: 0x10001 Service Class ID List: "Serial Port" (0x00001101) Protocol Descriptor List: "L2CAP" (0x00000100) "RFCOMM" (0x00000003) Channel: 1 Language Base Attr List: code_ISO639: 0x656e encoding: 0x6a base_offset: 0x100 Profile Descriptor List: "Serial Port" (0x00001101) Version: 0x0100 _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
