[quoted lines by Klaus Knopper on 2012/09/20 at 02:17 +0200] >1. SBL detects the program running on the current text console by >reading its associated processes command name. For example, "elinks".
Am I correct that, for example, it'd always be "screen" if a user is using screen-maintained sessions? >2. SBL automatically sets volume, pitch, speech, language, braille >modes, charmode or linemode and attribute cursor tracking and other >behaviour specific to this program, in this example from a config file >/etc/sbl/profile/elinks. Does each profile contain the complete list of settings? Let's say that I start out with Setting1 and Setting2 both set to off. The profile for Program1 sets Setting1 to on, and the profile for Program2 sets Setting2 to on. I run Program1, then Program2, and then Program1 again. Will Setting1 and Setting2 now both be on, or does it always reload the defaults before applying a profile? Could you please give an example or two for how an attribute-based cursor is defined? -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | 2011 May 21 is the End of Salvation. EMail: [email protected] | Canada K2A 1H7 | http://Mielke.cc/now.html http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
