On Wed, Feb 20, 2013 at 11:23:14PM -0500, Dave Mielke wrote:
> [quoted lines by Daniel Dalton on 2013/02/20 at 21:40 +1100]
Hi Dave,
> >Here is some info from syslog while trying to connect:
> >
> >Feb 20 21:03:27 vostro-3350 brltty[5107]: RFCOMM connect error 52: Invalid
> >exchange.
>
> I haven't seen this one before. The error would be occurring between the
> kernel
> and the device. My immediate guess is that the driver is trying to
> communicate
> with the device using the wrong RFCOMM channel. Could you please post the
> output of:
>
> sdptool browse <address>
>
> Attaching a file containing the output would be best.
It is attached.
Also how to ensure the device is actually paired/connected in the gui
seems hard, because orca isn't really showing it although it did
successfully add. So I presume it is ok.
Cheers,
Daniel
Browsing 00:25:EC:01:8A:9D ...
Service Name: Serial Port
Service RecHandle: 0x10000
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Serial Port" (0x1101)
Version: 0x0100
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
