the only cable are the cable to the vario 40
and the gto adapter have one micro usb contact
to the phone
and the other are a standard usb contact to the vario cable
----- Original Message -----
From: "Dave Mielke" <[email protected]>
To: "Informal discussion between users and developers of BRLTTY."
<[email protected]>
Sent: Wednesday, April 24, 2013 5:33 AM
Subject: Re: [BRLTTY] android
[quoted lines by mattias on 2013/04/24 at 05:30 +0200]
i now have a usb tgo adapter
i connected it to my phone
and connect my vario40 to it
but my display should beep when it are attached
but nothing
and brltty reports no driver
Do you mean that, after setting the Communication Method to USB, no
devices
show up in the Select Device list?
Can you describe the cable you have? What kind of connector is at each end
of
it?
--
Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of
God.
Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/
EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.com/
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
