Well, it certainly looks like it. Next, try googling for netmos on the web, and see what you can find.
>Okay, I did this command >lspci -v >and got this: >02:09.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O Controller >(rev >01) (prog-if 02 [16550]) >Subsystem: LSI Logic / Symbios Logic Device 0001 >Flags: medium devsel, IRQ 17 >I/O ports at d010 [size=8] >I/O ports at d018 [size=8] >I/O ports at d020 [size=8] >I/O ports at d028 [size=8] >I/O ports at d030 [size=8] >I/O ports at d000 [size=16] >Kernel driver in use: serial >That looks like the ports should be working, right? Is it normal to have >that many IO ports? >----- Original Message ----- >From: <[email protected]> >To: "Informal discussion between users and developers of BRLTTY." ><[email protected]> >Sent: Monday, June 24, 2013 10:28 PM >Subject: Re: [BRLTTY] some serial help > > >> Hi Rob. What make is your serial card? Some cards come with special >> drivers that need to be loaded before you can use the card. It's also >> possible that there is a jumper that can be set on the card to map the >> card as ttys0 and 1, or 2 and 3. The reason I mention the >> special drivers is that I have a Perle Systems serial card in my >> desktop box. With the card, there was a drivers disk containing drivers >> for windows, Mac Os, and Linux. The Linux drivers were open source, and >> had to be compiled and installed, before the card would function. >> >> It's possible that the card manufactorer has a web site where the >> drivers can be downloaded, if they didn't ship a cd with the card. I >> hope these suggestions help. >> >> Gene Collins >> >> _______________________________________________ >> This message was sent via the BRLTTY mailing list. >> To post a message, send an e-mail to: [email protected] >> For general information, go to: http://mielke.cc/mailman/listinfo/brltty > >_______________________________________________ >This message was sent via the BRLTTY mailing list. >To post a message, send an e-mail to: [email protected] >For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
