Bram Duvigneau <[email protected]> writes: > Hi all, > > I just installed Brltty on a Windows 7 64 bits machine and am trying to > connect a Handy Tech Modular Evolution 88. I'm experiencing the same > symptoms as described in this thread [0]. The concrete error message is: > > "Detected unknown HandyTech model with ID E3."
This looks like data corruption. There is no HandyTech device with ID E3. > Later in this thread it is suggested to change the USB-serial adapter, > which with this display is not an option because it's built-in. I tried > connecting through the virtual serial port that the FTDI drivers > provided me (e.g. serial:com3) and through libusb after installing the > right driver with usb:, both give me the same error. I also tried the > -bauto and explicit -bht switches, but all give the same result. Hmm, I have no experience with BRLTTY on Windows at all, but I have the feeling that "serial:com3" should have worked, strange. Samuel? -- CYa, ⡍⠁⠗⠊⠕ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
