Mario Lang, le Sun 02 Mar 2014 10:13:32 +0100, a écrit : > > Later in this thread it is suggested to change the USB-serial adapter, > > which with this display is not an option because it's built-in. I tried > > connecting through the virtual serial port that the FTDI drivers > > provided me (e.g. serial:com3) and through libusb after installing the > > right driver with usb:, both give me the same error. I also tried the > > -bauto and explicit -bht switches, but all give the same result. > > Hmm, I have no experience with BRLTTY on Windows at all, but I have the > feeling that "serial:com3" should have worked, strange. > Samuel?
serial:com3 should "just work", yes. The advantage is that it does not have to bear any bug in the libusb stack. If it still gets the same result, I'd tend to think it is really the device which emits this. Is the device known to work on Linux? Samuel _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
