Hello, Siju Samuel, le Mon 16 Jun 2014 13:16:21 -0500, a écrit : > When I used NVDA along with brltty, it was not able to get any input from the > refresh braillle display.
IIRC you already discussed the issue with Dave: it's a problem of NVDA not interpreting key events from BRLTTY. > I just want to confirm the following is oK. > In the installed NVDA location (C:\Program Files (x86)\NVDA) I see, > > brlapi.pyd and brlapi-0.5.dll > > In the brltty I am running and using in my app has brlapi-0.6 .dll. It is completely fine to have different versions of brlapi, that's not a problem. > >>I'm not sure what you mean by win32-usb, there are precompiled packages > >>with libusb-win32 support (brltty-win-4.5-1.*) and precompiled packages > >>>with libusb-1.0 support (brltty-win-4.5-1-libusb-1.0.*). > > I am using libusb-win32 and the device plus is configured to use this. > Do I need to install as a filter if it requires if NVDA need to use > Manuacture's device driver.? If NVDA needs the manufacturer's device driver, then you must not make the device use the libusb-win32 driver, and instead use the filter. Samuel _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
