Hi samule,. thanks I will try with filter. One clarification I have is after installing libus filter, do I need to run brltty.inf at the device plug point? What is the difference in set up related to brltty for using brltty driver vs filter?
>>> When I used NVDA along with brltty, it was not able to get any input from the >>> refresh braillle display. >>IIRC you already discussed the issue with Dave: it's a problem of NVDA >>not interpreting key events from BRLTTY. No I did not discuss this. But with a quick search I found the following NVDA ticket; which suggests they are waiting for BRLTTY5.1 precompiled packages to perform further development. Probably BRLTTY5.1_libubs too. (FYI) regards, siju samuel On Tue, Jun 17, 2014 at 5:40 PM, Samuel Thibault < [email protected]> wrote: > Hello, > > Siju Samuel, le Mon 16 Jun 2014 13:16:21 -0500, a écrit : > > When I used NVDA along with brltty, it was not able to get any input > from the > > refresh braillle display. > > IIRC you already discussed the issue with Dave: it's a problem of NVDA > not interpreting key events from BRLTTY. > > > I just want to confirm the following is oK. > > In the installed NVDA location (C:\Program Files (x86)\NVDA) I see, > > > > brlapi.pyd and brlapi-0.5.dll > > > > In the brltty I am running and using in my app has brlapi-0.6 .dll. > > It is completely fine to have different versions of brlapi, that's not a > problem. > > > >>I'm not sure what you mean by win32-usb, there are precompiled packages > > >>with libusb-win32 support (brltty-win-4.5-1.*) and precompiled packages > > >>>with libusb-1.0 support (brltty-win-4.5-1-libusb-1.0.*). > > > > I am using libusb-win32 and the device plus is configured to use this. > > Do I need to install as a filter if it requires if NVDA need to use > > Manuacture's device driver.? > > If NVDA needs the manufacturer's device driver, then you must not make > the device use the libusb-win32 driver, and instead use the filter. > > Samuel > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
