[quoted lines by Boris on 2014/06/25 at 20:47 +0200] >I still have a 10+ years old Papenmeier BRAILLEX EL 40 P C-Rev. 3.06 >that works fine with BRLTTY when it is connected by serial port, but not >by USB. When I received it, I remember it worked by USB with Jaws and >not with BRLTTY under GNU/Linux neither by USB nor by serial port. >However, at that time, Dave helped and fixed the driver pm in BRLTTY so >that it works by serial port. If I remember, the issue was about >something like data rate. We did not fix the issue for USB but nowadays >it becomes necessary... How should I proceed?
The first thing we need to see is a debug log. Which release of brltty are you using? Assuming that it's 5.0 or newer, please run brltty with -L (uppercase) to specify the file to write the log into, and with -l (lowercase) to specify a number of log categories. So, please run brlttgy with these additional options: -Lbrltty.log -ldebug,usb,inpkts.outpkts Then, attach the log file to a message to this list so that we can have a look at it. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.com/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
