Dave, In fact it is an USB plug but a serial port. I ensured that kernel module usbserial was loaded and started brltty with pm driver on device ttyUSB0 and it worked.
Many thanks and best regards, Boris <[email protected]> writes: > Thanks Dave, > > Please find attached lsusb output and /sys/kernel/debug/usb/devices > file. > > Best regards, > > > > Dave Mielke <[email protected]> writes: > >> [quoted lines by Boris on 2014/06/28 at 15:01 +0200] >> >>>Please find attached the log produced by "sudo brltty -Lbrltty.log >>>-ldebug,usb,inpkts.outpkts". My system runs Debian Sid. >> >> It really isn't finding your device. Please post the output of the lsusb >> command. Also, if you have either /proc/bus/usb/devices or >> /sys/kernel/debug/usb/devices, please post it as well. These should be done, >> of >> course, while your braille device is connected. -- Boris Daix _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
