On Sat, Apr 04, 2015 at 10:19:20PM +0200, Lars Bjørndal wrote: > Hi, Maria! > > Thank you for your quick response. You wrote: > > > Lars Bjørndal <[email protected]> writes: > > > > > I still have problem connecting a Handy Tech Active Braille through > > > bluetooth. After updating BRLTTY to 5.2 rev BRLTTY-5.2-481-gb08c90d3M, > > > I get lot of the following error in /var/log/messages: > > > > > > Apr 3 22:40:08 lapx brltty[2077]: hci_get_route error 19: No such > > > device. > > > > > > My Active Braille now has the latest firmware. > > > > I don't have any Active Braille ready for testing, need to check if I > > can borrow one, that might take a while though. Meanwhile, one thing > > comes to mind: Are you sure the device is paired correctly? Bluetooth 5 > > needs to be configured differently from bluetooth 4. The old "just edit > > the pincodes file" trick does no longer work. What version of the > > bluetooth stack do you have installed? I recently updated > > README.Bluetooth with information how to deal with Bluetooth 5. If you > > have that installed, give the new documentation a read. > > Ok. I followed your steps to connect with version 5. I was able to > pair. However, it still doesn't work, and no I have the following log > output: > > Apr 4 21:16:39 lapx brltty[2047]: HandyTech Braille Driver: version 0.6 > Apr 4 21:16:39 lapx bluetoothd[855]: Authentication attempt without agent > Apr 4 21:16:39 lapx bluetoothd[855]: Access denied: org.bluez.Error.Rejected > ... > Apr 4 21:16:40 lapx brltty[2047]: missing braille message acknowledgement
At last I did 'connect <device address>' from the bluetoothctl environment, and all works perfectly. The connect command is not mentioned in the README.bluetooth file. Maybe it should have been. Thanks, Lars _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
