Lars Bjørndal <[email protected]> writes: > On Sat, Apr 04, 2015 at 10:19:20PM +0200, Lars Bjørndal wrote: >> Hi, Maria! >> >> Thank you for your quick response. You wrote: >> >> > Lars Bjørndal <[email protected]> writes: >> > >> > > I still have problem connecting a Handy Tech Active Braille through >> > > bluetooth. After updating BRLTTY to 5.2 rev BRLTTY-5.2-481-gb08c90d3M, >> > > I get lot of the following error in /var/log/messages: >> > > >> > > Apr 3 22:40:08 lapx brltty[2077]: hci_get_route error 19: No such >> > > device. >> > > >> > > My Active Braille now has the latest firmware. >> > >> > I don't have any Active Braille ready for testing, need to check if I >> > can borrow one, that might take a while though. Meanwhile, one thing >> > comes to mind: Are you sure the device is paired correctly? Bluetooth 5 >> > needs to be configured differently from bluetooth 4. The old "just edit >> > the pincodes file" trick does no longer work. What version of the >> > bluetooth stack do you have installed? I recently updated >> > README.Bluetooth with information how to deal with Bluetooth 5. If you >> > have that installed, give the new documentation a read. >> >> Ok. I followed your steps to connect with version 5. I was able to >> pair. However, it still doesn't work, and no I have the following log >> output: >> >> Apr 4 21:16:39 lapx brltty[2047]: HandyTech Braille Driver: version 0.6 >> Apr 4 21:16:39 lapx bluetoothd[855]: Authentication attempt without agent >> Apr 4 21:16:39 lapx bluetoothd[855]: Access denied: org.bluez.Error.Rejected >> ... >> Apr 4 21:16:40 lapx brltty[2047]: missing braille message acknowledgement > > At last I did 'connect <device address>' from the bluetoothctl > environment, and all works perfectly. The connect command is not > mentioned in the README.bluetooth file. Maybe it should have been.
The devices I tested so far did not need "connect" to be executed. So this looks like a Active Braille specific issue to me. -- CYa, ⡍⠁⠗⠊⠕ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
