Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. [Bug 756] Device appears to not charge or have failed
([EMAIL PROTECTED])
2. [Bug 780] New: uboot usb serial broken
([EMAIL PROTECTED])
3. [Bug 780] uboot usb serial broken
([EMAIL PROTECTED])
4. [Bug 771] Touching LCD screen does not wakeup neo anymore
([EMAIL PROTECTED])
5. [Bug 770] Battery discharging while phone is off
([EMAIL PROTECTED])
6. [Bug 775] bluetooth can not be enabled (kernel
2.6.22.5-moko11 / 20070829) ([EMAIL PROTECTED])
7. [Bug 736] the 2007.2 software doesn't let you calibrate your
screen ([EMAIL PROTECTED])
8. [Bug 682] OpenMoko compatible with T-Mobile [EMAIL PROTECTED]
([EMAIL PROTECTED])
9. [Bug 682] OpenMoko compatible with T-Mobile [EMAIL PROTECTED]
([EMAIL PROTECTED])
10. [Bug 781] New: LM4857 should be turned off on a reboot
notifier ([EMAIL PROTECTED])
11. [Bug 781] LM4857 should be turned off on a reboot notifier
([EMAIL PROTECTED])
12. Your Bugzilla buglist needs attention. ([EMAIL PROTECTED])
13. [Bug 770] Battery discharging while phone is off
([EMAIL PROTECTED])
14. [Bug 770] Battery discharging while phone is off (GSM part)
([EMAIL PROTECTED])
15. [Bug 781] LM4857 should be turned off on a reboot notifier
([EMAIL PROTECTED])
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=756
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |INVALID
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 12:24 -------
Poorly described/named bug.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=780
Summary: uboot usb serial broken
Product: OpenMoko
Version: current svn head
Platform: PC
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: u-boot
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
CC: [email protected]
the u-boot version I just built:
u-boot-gta01bv4-1.2.0+git3e66c078003607a7d1d214c15a5f262bc1b4032f+svn20070829-r2.bin
and flashed does this:
[EMAIL PROTECTED]:~$ cu -l /dev/ttyACM0
Connected.
In: usbtty
OIn: usbtty
O_�Y�U��W�E��*ݪ���U��q�\�U�߬ut: usbtty
Err: usbtty
DEV_�Y�UICE_CONFIGURED: ��q�\�U�߬1
Enabliamatic fast charge
GTA01Bv4 #
FIGURED: ��q�\�U�߬1
Enabliamatic fast charge
GTA01
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=780
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 19:34 -------
http://buildhost.openmoko.org/OM2007.2/tmp/deploy/glibc/images/fic-gta01/u-boot-gta01bv4-1.2.0+git8993e54b6f397973794f3d6f47d3b3c0c98dd4f6+svn20070821-r0.bin
Seems to work better.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=771
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 20:10 -------
Just tested it, i can confirm that fixed the issue
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=770
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 20:17 -------
Quoting a recent mail from on device-owners ML:
"I hooked up a current meter between my battery and the phone, and noted that my
Neo draws around 41mA (meter not calibrated recently) after turning on then off.
The -P option with the shutdown command doesn't seem to have an effect on this.
As Fabien noted, if I physically disconnect the battery for a few moments after
shutting down, then reconnect it, the phone draws much less current,
approximately 70uA, which is why the battery does not drain overnight. Another
interesting thing I noted was that if I only disconnect the battery for a very
short time (maybe 1 second), the phone then draws 14mA instead of 41."
Any way we could have some tips from FIC ?
Does it look like a BUG or un unimplemented feature ? (Like making sure all bits
are powered off before to shut down the s3c241O)
Cheers,
Fabien
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=775
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[EMAIL PROTECTED]
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 21:33 -------
Could you please provide some clue on what step that used to work in the old
build does not work in the new one anymore ?
Cheers,
Fabien
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=736
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 21:53 -------
An easy way to calibrate your screen without much trouble:
see http://onlinedev.blogspot.com/2007/08/calibrating-openmoko-v20072.html
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=682
------- Additional Comments From [EMAIL PROTECTED] 2007-08-30 23:58 -------
T-Mobile HotSpot @Home works as a home phone in your house and a mobile phone on
the goâso now you can have just one phone with all of your favorite features.
Use a T-Mobile HotSpot Phone (that provides mobile and Wi-Fi calling) along with
a wireless router (T-Mobile offers specially designed routers for optimal
in-home performance) to get great coverage at home. In addition, by adding the
T-Mobile Hotspot @Home Add-On to their rate plan, customers will receive
unlimited nationwide calls from any Wi-Fi or US T-Mobile HotSpot location.
Addition info can be found at:
http://support.t-mobile.com/knowbase/root/public/tm23449.htm
http://support.t-mobile.com/knowbase/root/public/tm23450.htm
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=682
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 00:25 -------
First of all we have to wait until we are ready to ship GTA02 phones, with
integrated wifi, and have fully working wifi support before we can think more
about this.
Unfortunately the sites not really states what _technically_ requirements are
needed on the phone to support this. Scanning for wifi networks is of course no
problem, but there are still some questions open:
1) What kind of VoIP protocol is used?
2) Open source software clients for linux?
3) At least linux clients?
4) ...
Once we have a detailed technical descriptions of the needed requirements on the
ohone side we can think about if and how to can use this.
I leave this bug open for further tracking.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=781
Summary: LM4857 should be turned off on a reboot notifier
Product: OpenMoko
Version: unspecified
Platform: Neo1973
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: kernel
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
CC: [email protected]
According to http://wiki.openmoko.org/wiki/Neo1973_GTA01_Power_Management, the
LM4857 is connected directly to the battery, and its datasheet shows it uses
several mA when not off. If it is not turned off when shutting down, it will
drain the battery even with the phone off. To avoid this, it should be turned
off when rebooting or powering off the phone.
The best place to turn it off would be by the sound driver in the reboot
notifier chain (register_reboot_notifier). As a workaround, you can set the "Amp
Mode" mixer to "Off" (0) before shutting down the phone.
Thanks to SpeedEvil for guessing the LM4857 was not being turned off and for
measuring the currents.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=781
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 03:23 -------
It would also probably be a good idea to turn if off/on on suspend/resume
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
[This e-mail has been automatically generated.]
You have one or more bugs assigned to you in the Bugzilla
bugsystem (http://bugzilla.openmoko.org/cgi-bin/bugzilla/) that require
attention.
All of these bugs are in the NEW state, and have not been touched
in 7 days or more. You need to take a look at them, and
decide on an initial action.
Generally, this means one of three things:
(1) You decide this bug is really quick to deal with (like, it's INVALID),
and so you get rid of it immediately.
(2) You decide the bug doesn't belong to you, and you reassign it to someone
else. (Hint: if you don't know who to reassign it to, make sure that
the Component field seems reasonable, and then use the "Reassign bug to
owner of selected component" option.)
(3) You decide the bug belongs to you, but you can't solve it this moment.
Just use the "Accept bug" command.
To get a list of all NEW bugs, you can use this URL (bookmark it if you like!):
http://bugzilla.openmoko.org/cgi-bin/bugzilla/buglist.cgi?bug_status=NEW&[EMAIL
PROTECTED]
Or, you can use the general query page, at
http://bugzilla.openmoko.org/cgi-bin/bugzilla/query.cgi.
Appended below are the individual URLs to get to all of your NEW bugs that
haven't been touched for a week or more.
You will get this message once a day until you've dealt with these bugs!
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=69
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=112
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=114
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=129
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=141
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=181
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=276
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=301
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=340
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=412
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=448
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=466
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=555
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=572
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=589
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=624
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=630
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=661
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=696
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=700
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=714
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=723
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=724
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=727
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=742
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=770
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[EMAIL PROTECTED]
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 05:42 -------
yes, this is sort-of a known issue. It seems not all peripherals are properly
turned off before shutting down the PMU. Especially the GSM part most
definitely is still on, unless it receives and [EMAIL PROTECTED] on the UART
prior to
shutdown.
the gsmd init script should take care of that, which it most likely doesn't.
In GTA02 we have addressed this by hardware, i.e. GSM will automatically be
switched off once the PMU shuts down.
Another potential issue is the audio amplifier (see #781).
So while this is known for a long time, our extremely small and overloaded team
just didn't have time to implement it yet.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=770
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
AssignedTo|[EMAIL PROTECTED] |[EMAIL PROTECTED]
Component|kernel |sysinit
Summary|Battery discharging while |Battery discharging while
|phone is off |phone is off (GSM part)
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 05:44 -------
changing this bug to cover the GSM side only. maybe somebody can verify that
[EMAIL PROTECTED] indeed helps (i.e. manually issue it before power-down).
Once we have a
tested patch for the gsmd init script, I'm more than sure alphaone would be
happy to apply it.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=781
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[EMAIL PROTECTED]
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 05:46 -------
of course it is a good idea, and in fact it has always been the plan to do so.
This issue is again one of the many known issues for which our hand full of
internal developers just didn't have the time yet :(
If somebody would implement a kernel patch, I'm happy to review and/or apply.
jserv: can somebody of your team look into this issue?
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
