Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. [Bug 700] Time/Date stops in suspend
([EMAIL PROTECTED])
2. [Bug 770] Battery discharging while phone is off (GSM part)
([EMAIL PROTECTED])
3. [Bug 760] /etc/default/gsmd: 6: Syntax error
([EMAIL PROTECTED])
4. [Bug 763]
uboot-gta01-1.2.0+svnnow-r14_3e66c078003607a7d1d214c15a5f262bc1b4032f_0_2834-do_compile
([EMAIL PROTECTED])
5. [Bug 766] gsmd misbehaves on back-to-back AT+CFUN=1/AT+COPS=0
([EMAIL PROTECTED])
6. [Bug 574] timing issues / buffer parsing issues in gsmd
([EMAIL PROTECTED])
7. [Bug 762] GTA01v4 Only Charges at 40ma
([EMAIL PROTECTED])
8. [Bug 15] kernel oops when unloading g_ether
([EMAIL PROTECTED])
9. [Bug 763]
uboot-gta01-1.2.0+svnnow-r14_3e66c078003607a7d1d214c15a5f262bc1b4032f_0_2834-do_compile
([EMAIL PROTECTED])
10. [Bug 781] LM4857 should be turned off on a reboot notifier
([EMAIL PROTECTED])
11. [Bug 170] usbtty: sometimes input/output oddities
([EMAIL PROTECTED])
12. [Bug 779] acm console broken - spits out garbage
([EMAIL PROTECTED])
13. [Bug 682] OpenMoko compatible with T-Mobile [EMAIL PROTECTED]
([EMAIL PROTECTED])
14. [Bug 775] bluetooth can not be enabled (kernel
2.6.22.5-moko11 / 20070829) ([EMAIL PROTECTED])
15. [Bug 775] bluetooth can not be enabled (kernel
2.6.22.5-moko11 / 20070829) ([EMAIL PROTECTED])
16. [Bug 749] OpenMoko will not boot without /etc/pointercal
present ([EMAIL PROTECTED])
17. [Bug 777] ssh into Neo doesn't work in 29 Aug. 2007 build
([EMAIL PROTECTED])
18. [Bug 752] Add pySerial package and dependancies
([EMAIL PROTECTED])
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=700
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=770
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 14:36 -------
Putting this into the init script seems to be like a layering violation -- after
all the gsmd is supposed to talk to the modem. Can't we put this into a
detaching method inside our machine plugin?
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=760
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 14:43 -------
fixed in OpenEmbedded by using the pipe "|" symbol. Thanks.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=763
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |INVALID
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 14:44 -------
huh?
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=766
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
BugsThisDependsOn| |574
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 14:47 -------
Making this depend on 574 since the problem obviously roots in timing / response
mapping issues.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=574
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
OtherBugsDependingO| |766
nThis| |
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=762
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 15:14 -------
Yes these are GTA01Bv4.
When the device enumerates the current draw goes to 490 ma which is fine.
There are other charge anomolies. For example, on initial charge (battery in
cutoff and inserted) the charge current (initial 40ma) will drop after several
hours to zero but the bat will not in fact be charged. It will be charged enough
to get the device to enumerate, but it will then need several hours at 490ma for
the battery to reach a full charge.
Additionally, it appears the battery is float charging which is not good. The
battery should be allowed to drift down to 3.9V or less and then get a top off
charge to bring it back. This is probably just software that can be refined as
the PM matures.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=15
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 15:51 -------
Tried on 2.6.22.5-moko11, unloading g_ether does not give any oops.
However, re-loading it does not bring the network up. The interfaces are up,
but ping does not respond. I get these messages on the host machine:
usb 1-1: USB disconnect, address 69
usb0: unregister 'cdc_ether' usb-0000:00:1d.0-1, CDC Ethernet Device
usb 1-1: new full speed USB device using uhci_hcd and address 70
usb 1-1: configuration #1 chosen from 2 choices
usb0: register 'cdc_ether' at usb-0000:00:1d.0-1, CDC Ethernet Device,
0e:3b:2e:8b:8d:4b
NETDEV WATCHDOG: usb0: transmit timed out
NETDEV WATCHDOG: usb0: transmit timed out
NETDEV WATCHDOG: usb0: transmit timed out
NETDEV WATCHDOG: usb0: transmit timed out
...
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=763
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 16:16 -------
Oops, I need to update the scratch build...
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=781
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 17:00 -------
I make a test on GTA01bv4 as follows:
1. Cut off power for GSM. So GSM module can't work.
2. Power on GTA01, then enter into x-windows and power off GTA01.
3. Power supply displays 11.4 mV is draining.
4. I use alsactl to control amplifier enter "Amp Mode", before power off.
5. This time, power supply displays 0 mV.
So the LM4857 will drain the power.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=170
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 18:47 -------
Fixed in svn rev 2875
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=779
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 18:47 -------
Fixed in svn rev. 2875
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=682
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 21:06 -------
I tried contacting T-Mobile, but was not able to get to much information, but I
was able to get this much:
"..., please note that in order for a phone to work with the Hotspots @Home
service it is also required to have a dual-mode handset that is enabled to make
UMA calls. The current data devices that have Wi-Fi capability are only single
mode and will not allow a seamless connection between GSM and UMA."
So it looks like one of the requierments is to be runing GSM and Wi-Fi at the
same time. Perhapes someone can contact T-Mobile as a developer to get the rest
of the requierments.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=775
------- Additional Comments From [EMAIL PROTECTED] 2007-08-31 23:52 -------
This did also not work in previous versions, as far as I have tested them. It
was mentioned on IRC by someone that he got it to work after loading/compiling
some extra modules.
To my understanding, this never worked :-). Do you have evidence that it ever
did?
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=775
------- Additional Comments From [EMAIL PROTECTED] 2007-09-01 00:38 -------
I just flashed the new kernel which identifies itself (uname -a) as
fic-gta01 2.6.22.5-moko11 #1 PREEMPT Fri Aug 31 11:25:23 UTC 2007
and now I can power on bt and scan devices etc.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=749
------- Additional Comments From [EMAIL PROTECTED] 2007-09-01 00:56 -------
I can't reproduce this on a Neo, so this seems to be a Qemu-only thing.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=777
------- Additional Comments From [EMAIL PROTECTED] 2007-09-01 01:03 -------
I just tested ssh'ing into my neo1973 at 192.168.0.202 over usbnet with a fresh
build I just did today (August 31). I'm not sure what the right way to identify
my tree state is but anyway as far as I know the current tree is good.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=752
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
------- Additional Comments From [EMAIL PROTECTED] 2007-09-01 01:46 -------
it's in the feed now. feel free to request more packages.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
