Issue #2585 has been updated by swildner. Assignee set to swildner
ciss0: error sending BMIC ID_CTLR command (35) device_probe_and_attach: ciss0 attach returned 35 This is definitely relevant. It fails to attach. I will take a look on the weekend with my ciss controller. If #1579 is related, no clue. The driver was updated after #1579 but it isn't clear if it helped with Tomaž' issues. Sascha ---------------------------------------- Bug #2585: Dfly 3.4.3 on ESXi 5.1, HP Smart Array P410 passthrough recognised, but not functioning http://bugs.dragonflybsd.org/issues/2585#change-11591 * Author: yggdrasil * Status: New * Priority: Normal * Assignee: swildner * Category: * Target version: ---------------------------------------- Just installed 3.4.3 in an ESXi on Proliant DL180G6. I wanted to use 3 disks attached to the Smart Array P410 in RAID5 mode solely for Dfly/HAMMER for backup purposes, so I configured it as passthrough in ESXi, rebooted and installed Dfly. Neither during installation, nor afterwards could I access the RAID5 array on the P410. ciss0 gets created, but seems to be malfunctioning. During boot, Dfly waits for some time after the line ciss0: PERFORMANT Transport before continuing. Could #1579 be related? All the best -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
