Issue #2688 has been reported by davshao. ---------------------------------------- Bug #2688: 67613368bdda7 Fix wrong checks for U4B presence Asrock Z77M difficulty detecting USB keyboard http://bugs.dragonflybsd.org/issues/2688
* Author: davshao * Status: New * Priority: Normal * Assignee: * Category: * Target version: ---------------------------------------- For an Asrock Z77M motherboard, Intel Core i3-3225 CPU PC, detection of a USB keyboard was already somewhat erratic, but following 67613368bdda7 Fix wrong checks for U4B presence it has become almost impossible. The motherboard is UEFI, but I am using legacy support modes for hard drives and USB to emulate older booting using BIOS. The following summarizes the differences I can see between two verbose dmesg's, one asrock_z77m_verbose_good.txt with 67613368bdda7 reverted, the other asrock_z77m_verbose_bad.txt with current master. The USB keyboard and USB mouse are attached using a USB hub but similar behavior has been observed not using a hub. Nothing similar has been noticed with the same system using other OSes such as FreeBSD i386 current, FreeBSD 10 stable, FreeBSD 10 releng, NetBSD 6.99.x, OpenBSD 5.5-current, etc. Both have kbd: new array size 4 kbd1 at kbdmux0 Both have pci0: <serial bus, USB> (vendor 0x8086, dev 0x1e31) at device 20.0 irq 16 pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16 ehci0.pci0.pcib0.acpi0.nexus0.root0 ehci0: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0 Only the reverted good boot has: ehci0: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7f18000 usbus0: waiting for BIOS to give up control Then both have: usbus0: EHCI version 1.0 usbus0.ehci0.pci0.pcib0.acpi0.nexus0.root0 usbus0: <Intel Panther Point USB 2.0 controller> [tentative] on ehci0 usbus0: <Intel Panther Point USB 2.0 controller> [attached!] on ehci0 ehci0: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0 Later both dmesgs have: ehci1.pci0.pcib0.acpi0.nexus0.root0 ehci1: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0 Only the reverted good dmesg has: ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7f17000 Both have: ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus Only the reverted good dmesg has: usbus1: waiting for BIOS to give up control Then both have: usbus1: EHCI version 1.0 usbus1.ehci1.pci0.pcib0.acpi0.nexus0.root0 usbus1: <Intel Panther Point USB 2.0 controller> [tentative] on ehci1 usbus1: <Intel Panther Point USB 2.0 controller> [attached!] on ehci1 ehci1: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0 Later both have: usbus1: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ... ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered But then only the reverted good dmesg has: uhub3: 8 ports with 8 removable, self powered ugen1.3: <vendor 0x1a40> at usbus1 uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus1 uhub4: MTT enabled uhub4: 7 ports with 7 removable, self powered ... ugen1.4: <vendor 0x04d9> at usbus1 ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus1 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus1 ... ugen1.5: <Logitech> at usbus1 ... ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 5> on usbus1 ums0: 8 buttons and [XYZT] coordinates ID=0 ---Files-------------------------------- asrock_z77m_verbose_bad.txt (123 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
