Please try a newer snapshot, this is likely to be fixed
On 2010/08/04 11:27, [email protected] wrote: > >Number: 6441 > >Category: amd64 > >Synopsis: unable to upgrade to 4.8-beta from cd to USB stick > >Confidential: yes > >Severity: serious > >Priority: medium > >Responsible: bugs > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: unknown > >Arrival-Date: Wed Aug 04 09:40:01 GMT 2010 > >Closed-Date: > >Last-Modified: > >Originator: > >Release: > >Organization: > >Environment: > System : OpenBSD 4.8-beta > Details : OpenBSD 4.8-beta (RAMDISK_CD) #49: Wed Jul 28 18:35:55 > MDT 2010 > > [email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > > Architecture: OpenBSD.amd64 > Machine : amd64 > >Description: > When trying to upgrade to OpenBSD 4.8-beta on an USB stick, the install > isn't possible. During booting there are several long delays, emphasized by > >>> <<< markers in the dmesg. When fsck runs on the root partition nothing > seems to happen (no blinking light on the USB stick) and it ends in status > FAILED. I noticed afterwards that the dmesg is for i386 but I already removed > the temporary serial console so I only have i386 output at present. I also > tried to boot "1 Aug" snapshots for i386 and amd64, both showing the same > symptoms. > I can still boot the CURRENT system currently installed on the stick. > Having the stick attached to another system (with 4.8-beta installed on an > IDE drive) showed similar delays during boot with additional "ehci done" > messages. mount failed after a delay (probably a few minutes) with > "mount_ffs: /dev/sd0a on /mnt: Input/output error". disklabel failed (with a > very noticeable delay) with "disklabel: ioctl DIOCGDINFO: Input/output > error". The stick seems to be there though totally inaccessible. > Full system information is available on request. > > >How-To-Repeat: > boot install CD > >Fix: > None > > dmesg1: (partial) > OpenBSD 4.8-beta (GENERIC.MP) #289: Wed Jul 28 18:28:00 MDT 2010 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > .. > umass0 at uhub0 port 2 configuration 1 interface 0 "SMI Corporation USB DISK" > rev 2.00/11.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <Sharkoon, Flexi-Drive EC2, 1100> SCSI0 > 0/direct removable > sd1: 3871MB, 512 bytes/sec, 7928832 sec total > >Release-Note: > >Audit-Trail: > >Unformatted: > >>> delay: ~2:00 min. <<< > ... > softraid0 at root > >>> delay: ~2:30 min. <<< > root on rd0a swap on rd0b dump on rd0b > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/i386 4.8 installation program. > (I)nstall, (U)pgrade or (S)hell? > Welcome to the OpenBSD/i386 4.8 installation program. > (I)nstall, (U)pgrade or (S)hell? u > At any prompt except password prompts you can escape to a shell by > typing '!'. Default answers are shown in []'s and are selected by > pressing RETURN. You can exit this program at any time by pressing > Control-C, but this can leave your system in an inconsistent state. > > Terminal type? [vt220] > Available disks are: sd0 sd1. > Which one is the root disk? (or 'done') [sd0] sd1 > > NOTE: Once your system has been upgraded, you must manually merge any > changes to files in the 'etc' set into the files already on your system. > sysmerge(8) can help. > > Root filesystem? [sd1a] > Checking root filesystem (fsck -fp /dev/sd1a)...>>> delay: ~2:30 min. > <<<FAILED. > > dmesg2: (partial) > OpenBSD 4.8-beta (GENERIC.MP) #289: Wed Jul 28 18:28:00 MDT 2010 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > ... > umass0 at uhub0 port 1 configuration 1 interface 0 "SMI Corporation USB > DISK" rev 2.00/11.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Sharkoon, Flexi-Drive EC2, 1100> SCSI0 > 0/direct removable > sd0: 3871MB, 512 bytes/sec, 7928832 sec total > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done! > ehci_idone: ex=0xd1ea2700 is done!
