The following reply was made to PR amd64/6441; it has been noted by GNATS.
From: [email protected]
To: [email protected]
Cc: [email protected]
Subject: amd64/6441: unable to upgrade to 4.8-beta from cd to USB stick
Date: Wed, 4 Aug 2010 11:27:45 +0200 (CEST)
>Number: 6441
>Category: amd64
>Synopsis: unable to upgrade to 4.8-beta from cd to USB stick
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: unknown
>Arrival-Date: Wed Aug 04 09:40:01 GMT 2010
>Closed-Date:
>Last-Modified:
>Originator:
>Release:
>Organization:
>Environment:
System : OpenBSD 4.8-beta
Details : OpenBSD 4.8-beta (RAMDISK_CD) #49: Wed Jul 28 18:35:55
MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
When trying to upgrade to OpenBSD 4.8-beta on an USB stick, the install
isn't possible. During booting there are several long delays, emphasized by >>>
<<< markers in the dmesg. When fsck runs on the root partition nothing seems to
happen (no blinking light on the USB stick) and it ends in status FAILED. I
noticed afterwards that the dmesg is for i386 but I already removed the
temporary serial console so I only have i386 output at present. I also tried to
boot "1 Aug" snapshots for i386 and amd64, both sh owing the same symptoms.
I can still boot the CURRENT system currently installed on the stick.
Having the stick attached to another system (with 4.8-beta installed on an IDE
drive) showed similar delays during boot with additional "ehci done" messages.
mount failed after a delay (probably a few minutes) with "mount_ffs: /dev/sd0a
on /mnt: Input/output error". disklabel failed (with a very noticeable delay)
with "disklabel: ioctl DIOCGDINFO: Input/output error". The stick seems to be
there though totally inaccessible.
Full system information is available on request.
>How-To-Repeat:
boot install CD
>Fix:
None
dmesg1: (partial)
OpenBSD 4.8-beta (GENERIC.MP) #289: Wed Jul 28 18:28:00 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
.
umass0 at uhub0 port 2 configuration 1 interface 0 "SMI Corporation USB DISK"
rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Sharkoon, Flexi-Drive EC2, 1100> SCSI0 0/direct
removable
sd1: 3871MB, 512 bytes/sec, 7928832 sec total
>Release-Note:
>Audit-Trail:
>Unformatted:
>>> delay: ~2:00 min. <<<
...
softraid0 at root
>>> delay: ~2:30 min. <<<
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/i386 4.8 installation program.
(I)nstall, (U)pgrade or (S)hell?
Welcome to the OpenBSD/i386 4.8 installation program.
(I)nstall, (U)pgrade or (S)hell? u
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
Available disks are: sd0 sd1.
Which one is the root disk? (or 'done') [sd0] sd1
NOTE: Once your system has been upgraded, you must manually merge any
changes to files in the 'etc' set into the files already on your system.
sysmerge(8) can help.
Root filesystem? [sd1a]
Checking root filesystem (fsck -fp /dev/sd1a)...>>> delay: ~2:30 min.
<<<FAILED.
dmesg2: (partial)
OpenBSD 4.8-beta (GENERIC.MP) #289: Wed Jul 28 18:28:00 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
...
umass0 at uhub0 port 1 configuration 1 interface 0 "SMI Corporation USB DISK"
rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Sharkoon, Flexi-Drive EC2, 1100> SCSI0
0/direct removable
sd0: 3871MB, 512 bytes/sec, 7928832 sec total
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!
ehci_idone: ex=0xd1ea2700 is done!