Hi all,
On Aug 15, 2010, at 9:54 PM, Maikel Verheijen wrote: > Dear sir, madam, > > This weekend I purchased a Targa Now NT9231 box. (See a link to the specs according to the vendor below) > > Specs: > http://www.targa.co.uk/index.jsp?SID=0&NAV=236&DOC=&PAGE=2618&PCAT=2&PROD=477 &PTUBE=10&PARAMS=undefined&PARAMS2=undefined&SPCAREA=undefined After a lot of messing with the "boot -c" settings I've discovered that I can boot this box when i do "disable sisagp". The dmesg output of the running system is below. It is running a 4.8 snapshot now by the way :) Thanks for your time, Kind regards, Maikel Verheijen OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDC M,MOVBE real mem = 938897408 (895MB) avail mem = 913555456 (871MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/29/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xfb7e0 (28 entries) bios0: vendor American Megatrends Inc. version "0003" date 06/29/2009 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP APIC MCFG SLIC WDRT OEMB HPET acpi0: wakeup devices PCI0(S4) PS2K(S4) PS2M(S4) MAC_(S4) HDA_(S4) S184(S4) P0P7(S4) NPCE(S4) USB_(S1) USB2(S1) EUSB(S1) P0P6(S4) PWRB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDC M,MOVBE ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins ioapic0: misconfigured as apic 1, remapped to apid 2 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 acpicpu1 at acpi0 acpibtn0 at acpi0: PWRB acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: CRT_ acpivout1 at acpivideo0: TV0_ acpivout2 at acpivideo0: LCD_ bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1800 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "SiS 671 PCI" rev 0x00 agp at pchb0 not configured ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "SiS", unknown product 0x6351 rev 0x10 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 2 function 0 "SiS 968 ISA" rev 0x01 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 5597/5598: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20 (irq 11), version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21 (irq 5), version 1.0, legacy support ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 22 (irq 15) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 pciide1 at pci0 dev 5 function 0 vendor "SiS", unknown product 0x1183 rev 0x03: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 17 (irq 3) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HM160HI> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors pciide1: channel 1 ignored (not responding; disabled or no drives?) ppb1 at pci0 dev 6 function 0 "SiS PCI-PCI" rev 0x00 pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 2 int 16 (irq 10), address 00:26:18:7f:e8:b3 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 azalia0 at pci0 dev 15 function 0 "SiS 966 HD Audio" rev 0x00: apic 2 int 18 (irq 7) azalia0: codecs: Realtek ALC662 audio0 at azalia0 ppb2 at pci0 dev 31 function 0 "SiS PCI-PCI" rev 0x00 pci3 at ppb2 bus 3 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support uhub3 at uhub2 port 1 "ALCOR macally Kbd Hub" rev 1.10/1.00 addr 2 umass0 at uhub1 port 1 configuration 1 interface 0 "SDMMC M121 USB 2.0 SD/MMC READER" rev 2.00/2.01 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <USB 2.0, SD/MMC Reader, \\001 \\001> SCSI0 0/direct removable sd0: 1876MB, 512 bytes/sec, 3842048 sec total uhidev0 at uhub3 port 1 configuration 1 interface 0 "ALCOR macally Kbd Hub" rev 1.10/1.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 softraid0 at root root on wd0a swap on wd0b dump on wd0b [demime 1.01d removed an attachment of type application/pkcs7-signature which had a name of smime.p7s]
