My Blade 1500 freezes completely trying to play any audio. All I get is
the error message in the subject.
I'm sure I've played audio on this machine a few months ago with no
trouble, but I don't use it often enough to pinpoint the exact date.
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.0-current (GENERIC) #61: Fri Oct 28 15:00:24 MDT 2011
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 2147483648 (2048MB)
avail mem = 2100035584 (2002MB)
mainbus0 at root: Sun Blade 1500 (Silver)
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1503 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64
b/l)
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 0
schizo0: dvma map c0000000-dfffffff
pci0 at schizo0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"flashprom" at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: m5823
pcfiic0 at ebus0 addr 320-321 ivec 0x2e
iic0 at pcfiic0
admtt0 at iic0 addr 0x2e
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem3 at iic0 addr 0x53: 512MB DDR SDRAM registered ECC PC2300CL2.5
"ics951601" at iic0 addr 0x69 not configured
power0 at ebus0 addr 800-82f ivec 0x20
com0 at ebus0 addr 3f8-3ff ivec 0x2c: ns16550a, 16 byte fifo
com1 at ebus0 addr 2e8-2ef ivec 0x2c: ns16550a, 16 byte fifo
"dma" at ebus0 addr 0-ffff not configured
alipm0 at pci0 dev 6 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
iic1 at alipm0
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x02: ivec 0x7a4
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7a7,
version 1.0, legacy support
ohci1 at pci0 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7a6,
version 1.0, legacy support
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x798 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
"ppm" at mainbus0 not configured
schizo1 at mainbus0: "Tomatillo", version 4, ign 7c0, bus B 0 to 0
schizo1: dvma map c0000000-dfffffff
pci1 at schizo1
bge0 at pci1 dev 2 function 0 "Broadcom BCM5703" rev 0x00, BCM5702/5703 A2
(0x1002): ivec 0x7dc, address 00:14:4f:23:72:a2
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
ifb0 at pci1 dev 3 function 0 "3D Labs Wildcat 5110" rev 0x01
ifb0: XVR-1200 (SUNW,375-3101), 1280x1024
wsdisplay0 at ifb0 mux 1: console (std, sun emulation)
"3D Labs Wildcat 5110" rev 0x01 at pci1 dev 3 function 1 not configured
"i2c" at mainbus0 not configured
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 0 "NOVATEK USB Keyboard" rev
1.10/1.12 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub1 port 2 configuration 1 interface 1 "NOVATEK USB Keyboard" rev
1.10/1.12 addr 3
uhidev2: iclass 3/0, 4 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev2 reportid 4: input=2, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /pci@1e,600000/ide@d,0/disk@0,0
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
schizo0: pci bus A error
