>Synopsis: symbol(driDriverAPI) size mismatch
>Category: kernel
>Environment:
System : OpenBSD 5.1
Details : OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST
2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
Architecture: OpenBSD.i386
Machine : i386
>Description:
When starting Firefox 9.0.1 (built from the OpenBSD 5.1 -release
ports tree) Firefox dumps a core file and prints the following
error message to the console.
firefox:/usr/X11R6/lib/modules/dri/swrast_dri.so:
/usr/X11R6/lib/modules/dri/i915_dri.so : WARNING: symbol(driDriverAPI) size
mismatch, relink your program
But aside from the error and core file, Firefox appears to run
fine.
>How-To-Repeat:
With Firefox 9.0.1 installed from the OpenBSD 5.1 -release ports
tree, type
firefox
>Fix:
The problem appears to be that the structure __DriverAPIRec is
declared in two places:
/usr/xenocara/dist/Mesa/src/mesa/drivers/dri/common/dri_util.h
/usr/xenocara/dist/Mesa/src/mesa/drivers/dri/common/drisw_util.h
And the declarations are not the same. In particular, the
declaration in drisw_util.h is shorter.
dmesg:
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
real mem = 2137387008 (2038MB)
avail mem = 2092298240 (1995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/30/07, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS
rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "79ETD3WW (2.13 )" date 04/30/2007
bios0: LENOVO 1953CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT
SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) EXP1(S4)
EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4504" serial 35569 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0xea00! 0xdc000/0x4000! 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices
AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi, address
00:15:58:82:8c:2d
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
pci2 at ppb1 bus 3
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW1,
address 00:1b:77:1c:31:eb
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.08> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54161, SBDI> SCSI3 0/direct
fixed naa.5000cca51ee606f4
sd0: 114473MB, 512 bytes/sector, 234441648 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (a02b86a897ee064d.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 98084MB, 512 bytes/sector, 200876241 sectors
Xorg.0.log:
[2854553.276] (--) checkDevMem: using aperture driver /dev/xf86
[2854553.295] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[2854553.344]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[2854553.344] X Protocol Version 11, Revision 0
[2854553.345] Build Operating System: OpenBSD 5.1 i386
[2854553.345] Current Operating System: OpenBSD l3bw.my.domain 5.1
GENERIC.MP#188 i386
[2854553.345] Build Date: 11 February 2012 10:00:22PM
[2854553.345]
[2854553.345] Current version of pixman: 0.22.2
[2854553.345] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[2854553.345] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[2854553.345] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 1 22:23:02
2012
[2854553.401] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[2854553.403] (==) No Layout section. Using the first Screen section.
[2854553.404] (==) No screen section available. Using defaults.
[2854553.404] (**) |-->Screen "Default Screen Section" (0)
[2854553.404] (**) | |-->Monitor "<default monitor>"
[2854553.404] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[2854553.404] (==) Disabling SIGIO handlers for input devices
[2854553.404] (==) Automatically adding devices
[2854553.404] (==) Automatically enabling devices
[2854553.577] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[2854553.577] (==) ModulePath set to "/usr/X11R6/lib/modules"
[2854553.577] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[2854553.577] (II) Loader magic: 0x3c020020
[2854553.577] (II) Module ABI versions:
[2854553.577] X.Org ANSI C Emulation: 0.4
[2854553.577] X.Org Video Driver: 11.0
[2854553.577] X.Org XInput driver : 13.0
[2854553.577] X.Org Server Extension : 6.0
[2854553.578] (--) PCI:*(0:0:2:0) 8086:27a2:17aa:201a rev 3, Mem @
0xee100000/524288, 0xd0000000/268435456, 0xee200000/262144, I/O @ 0x00001800/8
[2854553.578] (--) PCI: (0:0:2:1) 8086:27a6:17aa:201a rev 3, Mem @
0xee180000/524288
[2854553.578] (II) LoadModule: "extmod"
[2854553.596] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[2854553.602] (II) Module extmod: vendor="X.Org Foundation"
[2854553.602] compiled for 1.11.4, module version = 1.0.0
[2854553.602] Module class: X.Org Server Extension
[2854553.602] ABI class: X.Org Server Extension, version 6.0
[2854553.602] (II) Loading extension MIT-SCREEN-SAVER
[2854553.602] (II) Loading extension XFree86-VidModeExtension
[2854553.602] (II) Loading extension XFree86-DGA
[2854553.602] (II) Loading extension DPMS
[2854553.602] (II) Loading extension XVideo
[2854553.602] (II) Loading extension XVideo-MotionCompensation
[2854553.602] (II) Loading extension X-Resource
[2854553.602] (II) LoadModule: "dbe"
[2854553.603] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[2854553.604] (II) Module dbe: vendor="X.Org Foundation"
[2854553.604] compiled for 1.11.4, module version = 1.0.0
[2854553.604] Module class: X.Org Server Extension
[2854553.604] ABI class: X.Org Server Extension, version 6.0
[2854553.604] (II) Loading extension DOUBLE-BUFFER
[2854553.604] (II) LoadModule: "glx"
[2854553.604] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[2854553.611] (II) Module glx: vendor="X.Org Foundation"
[2854553.612] compiled for 1.11.4, module version = 1.0.0
[2854553.612] ABI class: X.Org Server Extension, version 6.0
[2854553.612] (==) AIGLX enabled
[2854553.612] (II) Loading extension GLX
[2854553.612] (II) LoadModule: "record"
[2854553.613] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[2854553.614] (II) Module record: vendor="X.Org Foundation"
[2854553.614] compiled for 1.11.4, module version = 1.13.0
[2854553.614] Module class: X.Org Server Extension
[2854553.614] ABI class: X.Org Server Extension, version 6.0
[2854553.614] (II) Loading extension RECORD
[2854553.614] (II) LoadModule: "dri"
[2854553.615] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[2854553.627] (II) Module dri: vendor="X.Org Foundation"
[2854553.627] compiled for 1.11.4, module version = 1.0.0
[2854553.627] ABI class: X.Org Server Extension, version 6.0
[2854553.627] (II) Loading extension XFree86-DRI
[2854553.628] (II) LoadModule: "dri2"
[2854553.628] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[2854553.629] (II) Module dri2: vendor="X.Org Foundation"
[2854553.629] compiled for 1.11.4, module version = 1.2.0
[2854553.629] ABI class: X.Org Server Extension, version 6.0
[2854553.629] (II) Loading extension DRI2
[2854553.629] (==) Matched intel as autoconfigured driver 0
[2854553.629] (==) Matched vesa as autoconfigured driver 1
[2854553.629] (==) Assigned the driver to the xf86ConfigLayout
[2854553.629] (II) LoadModule: "intel"
[2854553.630] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[2854553.650] (II) Module intel: vendor="X.Org Foundation"
[2854553.651] compiled for 1.11.4, module version = 2.12.0
[2854553.651] Module class: X.Org Video Driver
[2854553.651] ABI class: X.Org Video Driver, version 11.0
[2854553.651] (II) LoadModule: "vesa"
[2854553.651] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[2854553.659] (II) Module vesa: vendor="X.Org Foundation"
[2854553.659] compiled for 1.11.4, module version = 2.3.0
[2854553.659] Module class: X.Org Video Driver
[2854553.659] ABI class: X.Org Video Driver, version 11.0
[2854553.660] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server
[2854553.660] (II) VESA: driver for VESA chipsets: vesa
[2854553.660] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[2854553.660] (WW) Falling back to old probe method for vesa
[2854553.674] (II) Loading sub module "vgahw"
[2854553.674] (II) LoadModule: "vgahw"
[2854553.676] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[2854553.685] (II) Module vgahw: vendor="X.Org Foundation"
[2854553.685] compiled for 1.11.4, module version = 0.1.0
[2854553.685] ABI class: X.Org Video Driver, version 11.0
[2854553.685] (II) Loading sub module "ramdac"
[2854553.685] (II) LoadModule: "ramdac"
[2854553.685] (II) Module "ramdac" already built-in
[2854553.685] drmOpenDevice: node name is /dev/drm0
[2854553.685] drmOpenDevice: open result is 10, (OK)
[2854553.686] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[2854553.686] drmOpenDevice: node name is /dev/drm0
[2854553.686] drmOpenDevice: open result is 10, (OK)
[2854553.686] drmOpenByBusid: drmOpenMinor returns 10
[2854553.686] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[2854553.686] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[2854553.686] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[2854553.686] (==) intel(0): RGB weight 888
[2854553.686] (==) intel(0): Default visual is TrueColor
[2854553.686] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[2854553.686] (--) intel(0): Chipset: "945GM"
[2854553.686] (--) intel(0): Linear framebuffer at 0xD0000000
[2854553.686] (--) intel(0): IO registers at addr 0xEE100000 size 524288
[2854553.687] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[2854553.687] (II) intel(0): the SDVO device with slave addr 70 is found on DVO
1 port
[2854553.723] Failed to load DMI info, X60 TV quirk not applied.
[2854553.723] (II) intel(0): 2 display pipes available.
[2854553.723] (II) Loading sub module "ddc"
[2854553.723] (II) LoadModule: "ddc"
[2854553.723] (II) Module "ddc" already built-in
[2854553.723] (II) Loading sub module "i2c"
[2854553.723] (II) LoadModule: "i2c"
[2854553.723] (II) Module "i2c" already built-in
[2854553.734] (II) intel(0): Output VGA has no monitor section
[2854553.734] (II) intel(0): Output LVDS has no monitor section
[2854553.746] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[2854553.746] (II) intel(0): Attempting to determine panel fixed mode.
[2854553.746] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address
0xA0.
[2854553.801] (II) intel(0): EDID for output LVDS
[2854553.801] (II) intel(0): Manufacturer: LEN Model: 4020 Serial#: 0
[2854553.801] (II) intel(0): Year: 2005 Week: 0
[2854553.801] (II) intel(0): EDID Version: 1.3
[2854553.801] (II) intel(0): Digital Display Input
[2854553.801] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 21
[2854553.801] (II) intel(0): Gamma: 2.20
[2854553.801] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[2854553.801] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[2854553.801] (II) intel(0): First detailed timing is preferred mode
[2854553.801] (II) intel(0): redX: 0.590 redY: 0.342 greenX: 0.319 greenY:
0.540
[2854553.801] (II) intel(0): blueX: 0.152 blueY: 0.137 whiteX: 0.313 whiteY:
0.329
[2854553.801] (II) intel(0): Supported established timings:
[2854553.801] (II) intel(0): 640x480@60Hz
[2854553.801] (II) intel(0): 800x600@60Hz
[2854553.801] (II) intel(0): 1024x768@60Hz
[2854553.801] (II) intel(0): Manufacturer's mask: 0
[2854553.801] (II) intel(0): Supported detailed timing:
[2854553.801] (II) intel(0): clock: 65.0 MHz Image Size: 286 x 214 mm
[2854553.801] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
h_blank_end 1344 h_border: 0
[2854553.801] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 806 v_border: 0
[2854553.801] (II) intel(0): Supported detailed timing:
[2854553.801] (II) intel(0): clock: 54.2 MHz Image Size: 286 x 214 mm
[2854553.801] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
h_blank_end 1344 h_border: 0
[2854553.801] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 806 v_border: 0
[2854553.801] (II) intel(0): Unknown vendor-specific block f
[2854553.801] (II) intel(0): LTN141XA-L01
[2854553.801] (II) intel(0): EDID (in hex):
[2854553.801] (II) intel(0): 00ffffffffffff0030ae204000000000
[2854553.801] (II) intel(0): 000f0103801d1578ea2d059757518a27
[2854553.801] (II) intel(0): 23505421080001010101010101010101
[2854553.801] (II) intel(0): 01010101010164190040410026301888
[2854553.801] (II) intel(0): 36001ed6100000192815004041002630
[2854553.801] (II) intel(0): 188836001ed6100000190000000f0061
[2854553.801] (II) intel(0): 43326143280f01004ca35841000000fe
[2854553.801] (II) intel(0): 004c544e31343158412d4c30310a00e9
[2854553.801] (II) intel(0): EDID vendor "LEN", prod id 16416
[2854553.802] xf86TokenToOptinfo: table is NULL
[2854553.802] (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
[2854553.802] (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller
B" registered at address 0x70.
[2854553.944] (II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
[2854553.974] (II) intel(0): Output TMDS-1 has no monitor section
[2854553.993] (II) intel(0): SDVOB: device VID/DID: 02:3C.06, clock range
25.0MHz - 200.0MHz
[2854553.993] (II) intel(0): SDVOB: 1 input channel
[2854553.993] (II) intel(0): SDVOB: TMDS0 output reported
[2854553.993] xf86TokenToOptinfo: table is NULL
[2854553.993] (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
[2854553.993] (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller
C" registered at address 0x72.
[2854553.994] (II) intel(0): No SDVO device found on SDVOC
[2854553.994] (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller
C" removed.
[2854553.994] (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
[2854554.000] (II) intel(0): Current clock rate multiplier: 1
[2854554.109] (==) intel(0): Write-combining range (0xa0000,0x10000) was
already clear
[2854554.183] (II) intel(0): EDID for output VGA
[2854554.237] (II) intel(0): EDID for output LVDS
[2854554.237] (II) intel(0): Manufacturer: LEN Model: 4020 Serial#: 0
[2854554.237] (II) intel(0): Year: 2005 Week: 0
[2854554.237] (II) intel(0): EDID Version: 1.3
[2854554.237] (II) intel(0): Digital Display Input
[2854554.237] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 21
[2854554.237] (II) intel(0): Gamma: 2.20
[2854554.237] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[2854554.237] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[2854554.237] (II) intel(0): First detailed timing is preferred mode
[2854554.237] (II) intel(0): GTF timings supported
[2854554.237] (II) intel(0): redX: 0.590 redY: 0.342 greenX: 0.319 greenY:
0.540
[2854554.237] (II) intel(0): blueX: 0.152 blueY: 0.137 whiteX: 0.313 whiteY:
0.329
[2854554.237] (II) intel(0): Supported established timings:
[2854554.237] (II) intel(0): 640x480@60Hz
[2854554.237] (II) intel(0): 800x600@60Hz
[2854554.237] (II) intel(0): 1024x768@60Hz
[2854554.237] (II) intel(0): Manufacturer's mask: 0
[2854554.238] (II) intel(0): Supported detailed timing:
[2854554.238] (II) intel(0): clock: 65.0 MHz Image Size: 286 x 214 mm
[2854554.238] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
h_blank_end 1344 h_border: 0
[2854554.238] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 806 v_border: 0
[2854554.238] (II) intel(0): Supported detailed timing:
[2854554.238] (II) intel(0): clock: 54.2 MHz Image Size: 286 x 214 mm
[2854554.238] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
h_blank_end 1344 h_border: 0
[2854554.238] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 806 v_border: 0
[2854554.238] (II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max:
200 kHz,
[2854554.238] (II) intel(0): LTN141XA-L01
[2854554.238] (II) intel(0): EDID (in hex):
[2854554.238] (II) intel(0): 00ffffffffffff0030ae204000000000
[2854554.238] (II) intel(0): 000f0103801d1578ea2d059757518a27
[2854554.238] (II) intel(0): 23505421080001010101010101010101
[2854554.238] (II) intel(0): 01010101010164190040410026301888
[2854554.238] (II) intel(0): 36001ed6100000192815004041002630
[2854554.238] (II) intel(0): 188836001ed6100000190000000f0061
[2854554.238] (II) intel(0): 43326143280f01004ca35841000000fe
[2854554.238] (II) intel(0): 004c544e31343158412d4c30310a00e9
[2854554.238] (II) intel(0): EDID vendor "LEN", prod id 16416
[2854554.238] (II) intel(0): Printing probed modes for output LVDS
[2854554.238] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[2854554.238] (II) intel(0): Modeline "1024x768"x50.0 54.16 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[2854554.238] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[2854554.238] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[2854554.246] (II) intel(0): EDID for output TMDS-1
[2854554.246] (II) intel(0): Output VGA disconnected
[2854554.246] (II) intel(0): Output LVDS connected
[2854554.246] (II) intel(0): Output TMDS-1 disconnected
[2854554.246] (II) intel(0): Using exact sizes for initial modes
[2854554.246] (II) intel(0): Output LVDS using initial mode 1024x768
[2854554.246] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[2854555.132] (==) intel(0): Write-combining range (0xa0000,0x10000) was
already clear
[2854555.154] (II) intel(0): detected 256 kB GTT.
[2854555.154] (II) intel(0): detected 7932 kB stolen memory.
[2854555.154] (==) intel(0): video overlay key set to 0x101fe
[2854555.154] (==) intel(0): DPI set to (96, 96)
[2854555.154] (II) Loading sub module "fb"
[2854555.154] (II) LoadModule: "fb"
[2854555.155] (II) Loading /usr/X11R6/lib/modules/libfb.so
[2854555.179] (II) Module fb: vendor="X.Org Foundation"
[2854555.179] compiled for 1.11.4, module version = 1.0.0
[2854555.179] ABI class: X.Org ANSI C Emulation, version 0.4
[2854555.179] (II) UnloadModule: "vesa"
[2854555.179] (II) Unloading vesa
[2854555.179] (==) Depth 24 pixmap format is 32 bpp
[2854555.179] (II) intel(0): Kernel reported 491520 total, 0 used
[2854555.179] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[2854555.180] (II) intel(0): [DRI2] Setup complete
[2854555.180] (II) intel(0): [DRI2] DRI driver: i915
[2854555.180] (**) intel(0): Framebuffer tiled
[2854555.180] (**) intel(0): Pixmaps tiled
[2854555.180] (**) intel(0): 3D buffers tiled
[2854555.180] (**) intel(0): SwapBuffers wait enabled
[2854555.184] (==) intel(0): VideoRam: 262144 KB
[2854555.184] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096,
tiled
[2854555.195] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0,
hwp->PIOOffset is 0x0000
[2854555.195] (==) intel(0): Write-combining range (0xa0000,0x10000) was
already clear
[2854555.199] (II) UXA(0): Driver registered support for the following
operations:
[2854555.199] (II) solid
[2854555.199] (II) copy
[2854555.199] (II) composite (RENDER acceleration)
[2854555.199] (II) put_image
[2854555.199] (II) get_image
[2854555.199] (==) intel(0): Backing store disabled
[2854555.199] (==) intel(0): Silken mouse disabled
[2854555.200] (II) intel(0): Initializing HW Cursor
[2854555.206] (II) intel(0): Current clock rate multiplier: 1
[2854555.915] (II) intel(0): Fixed memory allocation layout:
[2854555.915] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB,
0x000000007f800000 physical
)
[2854555.915] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB,
0x000000007f80a000 physical
)
[2854555.915] (II) intel(0): 0x007bf000: end of stolen memory
[2854555.915] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168
kB)
[2854555.915] (II) intel(0): 0x10000000: end of aperture
[2854555.915] (II) intel(0): BO memory allocation layout:
[2854555.915] (II) intel(0): 0x007bf000: start of memory manager
[2854555.915] (II) intel(0): 0x0fff5000: end of memory manager
[2854556.045] is lvds
[2854556.045] (II) intel(0): using SSC reference clock of 100 MHz
[2854556.065] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[2854556.332] (II) intel(0): Output configuration:
[2854556.332] (II) intel(0): Pipe A is off
[2854556.332] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[2854556.332] (WW) intel(0): Hardware claims pipe A is on while software
believes it is off
[2854556.332] (II) intel(0): Pipe B is on
[2854556.332] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[2854556.332] (II) intel(0): Output VGA is connected to pipe none
[2854556.332] (II) intel(0): Output LVDS is connected to pipe B
[2854556.332] (II) intel(0): Output TMDS-1 is connected to pipe none
[2854556.333] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[2854556.355] (==) intel(0): DPMS enabled
[2854556.355] (==) intel(0): Intel XvMC decoder disabled
[2854556.364] (II) intel(0): Set up textured video
[2854556.364] (II) intel(0): Set up overlay video
[2854556.379] (II) intel(0): direct rendering: DRI2 Enabled
[2854556.379] (--) RandR disabled
[2854556.379] (II) Initializing built-in extension Generic Event Extension
[2854556.379] (II) Initializing built-in extension SHAPE
[2854556.379] (II) Initializing built-in extension MIT-SHM
[2854556.379] (II) Initializing built-in extension XInputExtension
[2854556.379] (II) Initializing built-in extension XTEST
[2854556.379] (II) Initializing built-in extension BIG-REQUESTS
[2854556.379] (II) Initializing built-in extension SYNC
[2854556.379] (II) Initializing built-in extension XKEYBOARD
[2854556.379] (II) Initializing built-in extension XC-MISC
[2854556.379] (II) Initializing built-in extension SECURITY
[2854556.379] (II) Initializing built-in extension XINERAMA
[2854556.379] (II) Initializing built-in extension XFIXES
[2854556.379] (II) Initializing built-in extension RENDER
[2854556.379] (II) Initializing built-in extension RANDR
[2854556.379] (II) Initializing built-in extension COMPOSITE
[2854556.379] (II) Initializing built-in extension DAMAGE
[2854556.596] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[2854556.596] (II) AIGLX: enabled GLX_INTEL_swap_event
[2854556.596] (II) AIGLX: enabled GLX_SGI_make_current_read
[2854556.596] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[2854556.596] (II) AIGLX: Loaded and initialized i915
[2854556.596] (II) GLX: Initialized DRI2 GL provider for screen 0
[2854556.609] (II) intel(0): Setting screen physical size to 270 x 203
[2854557.224] (II) config/wscons: checking input device /dev/wskbd
[2854557.224] (II) wskbd: using layout us
[2854557.224] (II) LoadModule: "kbd"
[2854557.225] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[2854557.240] (II) Module kbd: vendor="X.Org Foundation"
[2854557.240] compiled for 1.11.4, module version = 1.6.1
[2854557.240] Module class: X.Org XInput Driver
[2854557.240] ABI class: X.Org XInput driver, version 13.0
[2854557.240] (II) Using input driver 'kbd' for '/dev/wskbd'
[2854557.240] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[2854557.241] (**) /dev/wskbd: always reports core events
[2854557.241] (**) /dev/wskbd: always reports core events
[2854557.241] (**) Option "Protocol" "standard"
[2854557.241] (**) Option "XkbRules" "base"
[2854557.241] (**) Option "XkbModel" "pc105"
[2854557.241] (**) Option "XkbLayout" "us"
[2854557.241] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[2854557.675] (II) config/wscons: checking input device /dev/wsmouse
[2854557.675] (II) LoadModule: "ws"
[2854557.676] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[2854557.677] (II) Module ws: vendor="X.Org Foundation"
[2854557.677] compiled for 1.11.4, module version = 1.3.0
[2854557.677] Module class: X.Org XInput Driver
[2854557.677] ABI class: X.Org XInput driver, version 13.0
[2854557.677] (II) Using input driver 'ws' for '/dev/wsmouse'
[2854557.677] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[2854557.677] (**) /dev/wsmouse: always reports core events
[2854557.677] (II) ws: /dev/wsmouse: debuglevel 0
[2854557.677] (**) Option "Device" "/dev/wsmouse"
[2854557.677] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[2854557.677] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[2854557.677] (**) ws: /dev/wsmouse: associated screen: 0
[2854558.072] (II) ws: /dev/wsmouse: minimum x position: 0
[2854558.072] (II) ws: /dev/wsmouse: maximum x position: 1023
[2854558.072] (II) ws: /dev/wsmouse: minimum y position: 0
[2854558.072] (II) ws: /dev/wsmouse: maximum y position: 767
[2854558.072] (==) ws: /dev/wsmouse: Buttons: 7
[2854558.115] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[2854558.115] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 7)
[2854558.512] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[2854558.512] (**) /dev/wsmouse: (accel) acceleration profile 0
[2854558.512] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[2854558.512] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[2854561.635] (II) AIGLX: Suspending AIGLX clients for VT switch
[2854600.876] (II) AIGLX: Resuming AIGLX clients after VT switch
[2854601.413] (II) intel(0): Fixed memory allocation layout:
[2854601.413] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB,
0x000000007f800000 physical
)
[2854601.413] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB,
0x000000007f80a000 physical
)
[2854601.413] (II) intel(0): 0x007bf000: end of stolen memory
[2854601.413] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168
kB)
[2854601.413] (II) intel(0): 0x10000000: end of aperture
[2854601.413] (II) intel(0): BO memory allocation layout:
[2854601.413] (II) intel(0): 0x007bf000: start of memory manager
[2854601.413] (II) intel(0): 0x0fff5000: end of memory manager
[2854601.535] is lvds
[2854601.535] (II) intel(0): using SSC reference clock of 100 MHz
[2854601.555] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[2854601.822] (II) intel(0): Output configuration:
[2854601.822] (II) intel(0): Pipe A is off
[2854601.823] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[2854601.823] (WW) intel(0): Hardware claims pipe A is on while software
believes it is off
[2854601.823] (II) intel(0): Pipe B is on
[2854601.823] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[2854601.823] (II) intel(0): Output VGA is connected to pipe none
[2854601.823] (II) intel(0): Output LVDS is connected to pipe B
[2854601.823] (II) intel(0): Output TMDS-1 is connected to pipe none
[2854601.887] (II) intel(0): EDID vendor "LEN", prod id 16416
[2854601.887] (II) intel(0): Using EDID range info for horizontal sync
[2854601.887] (II) intel(0): Using EDID range info for vertical refresh
[2854601.887] (II) intel(0): Printing DDC gathered Modelines:
[2854601.887] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[2854601.887] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[2854601.887] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[2854601.887] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[2854601.887] (II) intel(0): EDID vendor "LEN", prod id 16416
[2854650.665] (II) AIGLX: Suspending AIGLX clients for VT switch
[2854691.166] (II) AIGLX: Resuming AIGLX clients after VT switch
[2854691.703] (II) intel(0): Fixed memory allocation layout:
[2854691.703] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB,
0x000000007f800000 physical
)
[2854691.703] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB,
0x000000007f80a000 physical
)
[2854691.703] (II) intel(0): 0x007bf000: end of stolen memory
[2854691.703] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168
kB)
[2854691.703] (II) intel(0): 0x10000000: end of aperture
[2854691.703] (II) intel(0): BO memory allocation layout:
[2854691.703] (II) intel(0): 0x007bf000: start of memory manager
[2854691.704] (II) intel(0): 0x0fff5000: end of memory manager
[2854691.825] is lvds
[2854691.825] (II) intel(0): using SSC reference clock of 100 MHz
[2854691.845] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[2854692.112] (II) intel(0): Output configuration:
[2854692.112] (II) intel(0): Pipe A is off
[2854692.113] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[2854692.113] (WW) intel(0): Hardware claims pipe A is on while software
believes it is off
[2854692.113] (II) intel(0): Pipe B is on
[2854692.113] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[2854692.113] (II) intel(0): Output VGA is connected to pipe none
[2854692.113] (II) intel(0): Output LVDS is connected to pipe B
[2854692.113] (II) intel(0): Output TMDS-1 is connected to pipe none
[2854692.177] (II) intel(0): EDID vendor "LEN", prod id 16416
[2854692.177] (II) intel(0): Using hsync ranges from config file
[2854692.177] (II) intel(0): Using vrefresh ranges from config file
[2854692.177] (II) intel(0): Printing DDC gathered Modelines:
[2854692.177] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[2854692.177] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (40.3 kHz)
[2854692.177] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[2854692.177] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[2854692.177] (II) intel(0): EDID vendor "LEN", prod id 16416
