On 2012/10/25 13:12, [email protected] wrote:
> OpenBSD 5.2-current (GENERIC.MP) #73: Wed Oct 24 09:13:20 MDT 2012
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class)kernel:
> protection fault trap, code=0
> Stopped at calibrate_cyclecounter+0x9a: rdmsr
> calibrate_cyclecounter(d08d47b7,d0b0c8f4,d0a7cc00,d09db044,d09b047f) at
> calibra
> te_cyclecounter+0x9a
> identifycpu(d0b0c8e0,d08fb809,10,0,ffffffff) at identifycpu+0x1f5
> cpu_startup(d0a557c8,d08d6960,c0,d0bc7f4c,2) at cpu_startup+0xc8
> main(d02004d9,d02004e1,0,0,0) at main+0x7f
Useful information. There was another report of what must be the same
problem on misc@ but that had no backtrace. This is a problem with an
uncommitted diff in snapshots to support the CTSC (constant timestamp
counter) on some chips. For now if you want to upgrade, you could either
wait for a new snapshot to test, or build your own kernel from source.
> ddb{0}> ps
> PID PPID PGRP UID S FLAGS WAIT COMMAND
> ddb{0}> show registers
> ds 0x10
> es 0x10
> fs 0x20
> gs 0
> edi 0x38d
> esi 0xd0b0c8f4 cpu_info_primary+0x14
> ebp 0xd0bc7e68 end+0xb8c20
> ebx 0xd08fb900 _length_code+0x1a40
> edx 0xd0b0c8e0 cpu_info_primary
> ecx 0x38d
> eax 0x40
> eip 0xd07623fa calibrate_cyclecounter+0x9a
> cs 0x8
> eflags 0x10012
> esp 0xd0bc7e30 end+0xb8be8
> ss 0x10
> calibrate_cyclecounter+0x9a: rdmsr
> ddb{0}>
>
> The 10-Sep-2012 snapshot work fine on this computer (which I use to send the
> bug report).
> The 24-Oct-2012 snapshot boot without problem on a Dell Vostro 1310 laptop.
>
> >How-To-Repeat:
> On my computer (Dell PowerEdge SC430) it appends every time.
>
> >Fix:
> I have no clue.
>
>
> dmesg:
> OpenBSD 5.2-current (GENERIC.MP) #19: Mon Sep 10 07:54:14 MDT 2012
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF
> real mem = 2145501184 (2046MB)
> avail mem = 2099519488 (2002MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/06/06, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS rev. 2.3 @ 0xf0450 (60 entries)
> bios0: vendor Dell Inc. version "A04" date 10/06/2006
> bios0: Dell Inc. PowerEdge SC430
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
> acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
> PCI5(S5) PCI6(S5) MOU_(S1) USB0(S1) USB1(S1) USB2(S1) USB3(S1)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 8
> acpimcfg0 at acpi0 addr 0xd0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 5 (PCI4)
> acpiprt1 at acpi0: bus 2 (PCI2)
> acpiprt2 at acpi0: bus -1 (PCI3)
> acpiprt3 at acpi0: bus 1 (PCI1)
> acpiprt4 at acpi0: bus 3 (PCI5)
> acpiprt5 at acpi0: bus 4 (PCI6)
> acpiprt6 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> acpibtn0 at acpi0: VBTN
> bios0: ROM list: 0xc0000/0xf800 0xcf800/0x2000! 0xd1800/0x2800
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00: apic 8 int 16
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
> pci2 at ppb1 bus 2
> vga1 at pci2 dev 0 function 0 "ATI Radeon HD 4350" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: apic 8 int 16
> drm0 at radeondrm0
> azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 4000 HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 8 int 16
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 8 int 17
> pci4 at ppb3 bus 4
> bge0 at pci4 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
> (0x4001): apic 8 int 17, address 00:13:72:20:b7:84
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
> pci5 at ppb4 bus 5
> rl0 at pci5 dev 4 function 0 "Realtek 8139" rev 0x10: apic 8 int 16, address
> 00:e0:4c:10:0f:5c
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 ignored (disabled)
> pciide0: channel 1 ignored (disabled)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel
> 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 8 int 20 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
> wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
> atapiscsi0 at pciide1 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <PBDS, DVD+-RW DH-16W1S, 2D14> ATAPI 5/cdrom
> removable
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
> wd1 at pciide1 channel 1 drive 0: <ST3500413AS>
> wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int
> 17
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-4200CL3
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-4200CL3
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub0 port 2 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "TypeMatrix.com USB
> Keyboard" rev 1.10/1.30 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "TypeMatrix.com USB
> Keyboard" rev 1.10/1.30 addr 3
> uhidev1: iclass 3/1, 3 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhid2 at uhidev1 reportid 3: input=2, output=1, feature=0
> uhidev2 at uhub5 port 4 configuration 1 interface 0 "Primax Electronics USB
> Optical Mouse" rev 2.00/2.00 addr 4
> uhidev2: iclass 3/1
> ums0 at uhidev2: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uaudio0 at uhub4 port 2 configuration 1 interface 0 "Ten X Technology, Inc.
> USB AUDIO" rev 1.10/1.0b addr 2
> uaudio0: audio rev 1.00, 4 mixer controls
> audio0 at uaudio0
> uhidev3 at uhub4 port 2 configuration 1 interface 3 "Ten X Technology, Inc.
> USB AUDIO" rev 1.10/1.0b addr 2
> uhidev3: iclass 3/1
> uhid3 at uhidev3: input=8, output=8, feature=0
> uhidev4 at uhub4 port 2 configuration 1 interface 4 "Ten X Technology, Inc.
> USB AUDIO" rev 1.10/1.0b addr 2
> uhidev4: iclass 3/1, 3 report ids
> uhid4 at uhidev4 reportid 3: input=1, output=0, feature=0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a swap on wd0b dump on wd0b
>
> usbdevs:
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 addr 2: high speed, self powered, config 1, Hub(0x2504), Standard
> Microsystems(0x0424), rev 0.01
> port 1 powered
> port 2 addr 3: low speed, power 100 mA, config 1, USB Keyboard(0x2030),
> TypeMatrix.com(0x1e54), rev 1.30
> port 3 powered
> port 4 addr 4: low speed, power 98 mA, config 1, USB Optical Mouse(0x4d81),
> Primax Electronics(0x0461), rev 2.00
> port 3 powered
> port 4 powered
> port 5 powered
> port 6 powered
> port 7 powered
> port 8 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 addr 2: full speed, power 500 mA, config 1, USB AUDIO(0xf211), Ten X
> Technology, Inc.(0x1130), rev 1.0b
