Environment:
System : OpenBSD 5.2
Details : OpenBSD 5.2-current (GENERIC.MP) #11: Sun Dec 23
13:51:22 MST 2012
[email protected]:
/usr/src/sys/arch/i386/compile/GENERIC.MP
Architecture: OpenBSD.i386
Machine : i386
Description:
After upgrading to #11 build video command doesn't work - built-in
webcam "not configured"
How-To-Repeat:
Install 5.1 #11 GENERIC.MP from iso image to HP 620 with X support
Run video command. Get answer: video: /dev/video: Device not
configured
$ ls -lah /dev/video*
lrwxr-xr-x 1 root wheel 6 Dec 24 12:20 /dev/video -> video0
crw-rw-rw- 1 root wheel 44, 0 Dec 24 15:31 /dev/video0
crw-rw-rw- 1 root wheel 44, 1 Dec 24 15:31 /dev/video1
dmesg:
OpenBSD 5.2-current (GENERIC.MP) #11: Sun Dec 23 13:51:22 MST 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error
ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
cpu0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz ("GenuineIntel" 686-class)
2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF,PERF
real mem = 2072047616 (1976MB)
avail mem = 2027204608 (1933MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4 @
0x7bac3000 (21 entries)
bios0: vendor Hewlett-Packard version "68PVI Ver. F.0A" date 02/10/2011
bios0: Hewlett-Packard HP 620
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3)
U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz ("GenuineIntel" 686-class)
2.20 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF,PERF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PFN6
acpipwrres4 at acpi0: PFN7
acpipwrres5 at acpi0: PFN8
acpipwrres6 at acpi0: PFN9
acpipwrres7 at acpi0: PFNA
acpipwrres8 at acpi0: PFNB
acpipwrres9 at acpi0: PGF0
acpitz0 at acpi0: critical temperature is 108 degC
acpipwrres10 at acpi0: PFN0
acpipwrres11 at acpi0: PFN1
acpipwrres12 at acpi0: PFN2
acpipwrres13 at acpi0: PFN3
acpipwrres14 at acpi0: PFN4
acpipwrres15 at acpi0: PFN5
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 108 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 108 degC
acpitz5 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 02181 2010/05/18 type LIon
oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xfc00! 0xd0000/0x1000 0xd1000/0x1000
cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2201, 2200, 1600, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: IDT/0x7666, AT&T/Lucent/0x1040, Intel/0x2802, using
IDT/0x7666
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 17,
address e0:2a:82:1b:e9:e2
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
pci5 at ppb4 bus 133
re0 at pci5 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480),
apic 1 int 17, address 64:31:50:69:fc:3b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200BEVT-6, 02.0> SCSI3 0/direct
fixed naa.50014ee6ab43088d
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
cd0 at scsibus0 targ 1 lun 0: <hp, DVD RW AD-7586H, KH04> ATAPI 5/cdrom
removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub1: port 4 reset failed
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (dc81ab68dfa36e14.a) swap on sd0b dump on sd0b
usbdevs -dv:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub5
port 1 powered
port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub6
port 1 powered
port 2 powered
Controller /dev/usb7:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub7
port 1 powered
port 2 powered
--
Dmitry Orlov
