On Thu, Apr 24, 2014 at 11:00:42PM +0200, Martin Pieuchot wrote: > On 24/04/14(Thu) 21:47, Nils R wrote: > > Hi bugs@, > > > > my machine stopped resuming from suspend. I was following -current until > > the time when 5.5 was tagged, and back then, my machine always resumed > > without any problems. Now, i updated to the latest snapshot from 22.4.. > > With that, the machine goes to sleep, but does not quite wake up -- the fan > > starts, and i can open/close the cd drive, but the screen stays black and > > there is no network/ssh. It doesn't matter whether i suspend from tty or > > from X. > > > > Any thoughts? > > You can try reverting the last commit to /sys/dev/usb/usb.c and see if > it is the cause of your problem. If that's the case, could you try > suspending/resuming without any usb device attached and if that helps > try to find which device breaks your resume. >
I'd try what mpi@ says above before trying bisecting diffs like I suggested in that private mail I sent a few minutes ago. -ml > > > > Best, > > Nils > > > > dmesg: > > OpenBSD 5.5-current (GENERIC.MP) #80: Tue Apr 22 08:36:02 MDT 2014 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 3738107904 (3564MB) > > avail mem = 3629875200 (3461MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (61 entries) > > bios0: vendor Award Software International, Inc. version "F4" date > > 07/28/2010 > > bios0: Gigabyte Technology Co., Ltd. GA-880GMA-UD2H > > acpi0 at bios0: rev 0 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SSDT HPET MCFG MATS APIC > > acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) > > USB6(S3) SBAZ(S4) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) P2P_(S5) PCE2(S4) > > PCE3(S4) PCE4(S4) [...] > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpihpet0 at acpi0: 14318180 Hz > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: AMD Athlon(tm) II X2 240e Processor, 2813.25 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC > > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > > 64b/line 16-way L2 cache > > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully > > associative > > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully > > associative > > cpu0: AMD erratum 721 detected and fixed > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 200MHz > > cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: AMD Athlon(tm) II X2 240e Processor, 2812.92 MHz > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC > > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > > 64b/line 16-way L2 cache > > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully > > associative > > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully > > associative > > cpu1: AMD erratum 721 detected and fixed > > cpu1: smt 0, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins > > ioapic0: misconfigured as apic 0, remapped to apid 2 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 5 (PEX0) > > acpiprt2 at acpi0: bus 6 (PEX1) > > acpiprt3 at acpi0: bus -1 (PEX2) > > acpiprt4 at acpi0: bus -1 (PEX3) > > acpiprt5 at acpi0: bus 4 (P2P_) > > acpiprt6 at acpi0: bus -1 (PCE2) > > acpiprt7 at acpi0: bus -1 (PCE3) > > acpiprt8 at acpi0: bus -1 (PCE4) > > acpiprt9 at acpi0: bus -1 (PCE5) > > acpiprt10 at acpi0: bus -1 (PCE6) > > acpiprt11 at acpi0: bus -1 (PCE7) > > acpiprt12 at acpi0: bus 2 (PCE9) > > acpiprt13 at acpi0: bus 3 (PCEA) > > acpiprt14 at acpi0: bus -1 (PCEB) > > acpiprt15 at acpi0: bus -1 (PCEC) > > acpiprt16 at acpi0: bus 1 (AGP_) > > acpicpu0 at acpi0: PSS > > acpicpu1 at acpi0: PSS > > acpibtn0 at acpi0: PWRB > > cpu0: 2813 MHz: speeds: 2800 2100 1600 800 MHz > > pci0 at mainbus0 bus 0 > > 0:0:0: mem address conflict 0xe0000000/0x20000000 > > pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 > > ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00 > > pci1 at ppb0 bus 1 > > radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00 > > drm0 at radeondrm0 > > radeondrm0: apic 2 int 18 > > azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi > > azalia0: no supported codecs > > ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi > > pci2 at ppb1 bus 2 > > "NEC xHCI" rev 0x03 at pci2 dev 0 function 0 not configured > > ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi > > pci3 at ppb2 bus 3 > > re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > > (0x2800), msi, address 1c:6f:65:82:ec:b9 > > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, > > AHCI 1.2 > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG SSD 830, CXM0> SCSI3 0/direct > > fixed naa.5002538043584d30 > > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > > sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD10EADS-19M, 01.0> SCSI3 0/direct > > fixed naa.50014ee25a2d138a > > sd1: 953869MB, 512 bytes/sector, 1953525168 sectors > > cd0 at scsibus1 targ 4 lun 0: <Optiarc, DVD RW AD-7260S, 1.03> ATAPI > > 5/cdrom removable > > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x41: polling > > iic0 at piixpm0 > > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 > > spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int > > 16 > > azalia1: codecs: Realtek/0x0892 > > audio0 at azalia1 > > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 > > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > > pci4 at ppb3 bus 4 > > ath0 at pci4 dev 6 function 0 "Atheros AR2413" rev 0x01: apic 2 int 20 > > ath0: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 74:ea:3a:d2:ab:e0 > > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi > > pci5 at ppb4 bus 5 > > jmb0 at pci5 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00 > > pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to > > native-PCI > > pciide0: using apic 2 int 17 for native-PCI interrupt > > pciide0: channel 0 disabled (no drives) > > pciide0: channel 1 disabled (no drives) > > ppb5 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00: msi > > pci6 at ppb5 bus 6 > > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb2 at ehci2: USB revision 2.0 > > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > > usb3 at ohci0: USB revision 1.0 > > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at ohci1: USB revision 1.0 > > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x228 > > usb5 at ohci2: USB revision 1.0 > > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at ohci3: USB revision 1.0 > > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > > uhidev0 at uhub3 port 5 configuration 1 interface 0 "Logitech USB-PS/2 > > Optical Mouse" rev 2.00/21.00 addr 2 > > uhidev0: iclass 3/1 > > ums0 at uhidev0: 8 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (6de79c244a03d47a.a) swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > drm: initializing kernel modesetting (RS880 0x1002:0x9715 0x1458:0xD000). > > radeondrm0: VRAM: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF (512M used) > > radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF > > drm: PCIE GART of 512M enabled (table at 0x00000000C0040000). > > radeondrm0: 1680x1050 > > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
