On Mon, Jun 30, 2014 at 12:10:32AM +0200, Mark Kettenis wrote:
> > Date: Sun, 29 Jun 2014 00:25:44 +0100 (IST)
> > From: [email protected]
> >
> > Just upgraded my Asus Eee PC 1000 to the latest snapshot and
> > it hungs around time when console changes to higher resolution.
> > Machine stays with blank screen forever. After disabling acpi0
> > during boot up I'm able to start the machine. Below I'm inlining
> > dmesgs from previous working snapshot and from broken one with
> > acpi0 disabled.
>
> Does a kernel built from current sources show the same problem? If
> so, can you find out what commit broke things?
>
I have the same problem with my Asus Eee PC 901. When I disabled acpi during
boot, using UKC, it booted fine. dmesg below. I'm now building the kernel from
-current source. I'll go backwards from there.
OpenBSD 5.5-current (GENERIC.MP) #219: Sun Jun 29 19:09:31 MDT 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1064464384 (1015MB)
avail mem = 1034616832 (986MB)
User Kernel Config
UKC> ?\^H \^Hhelp
command args description
add dev add a device
base 8|10|16 base on large numbers
change devno|dev change devices
ddb enter ddb
disable attr val|devno|dev disable devices
enable attr val|devno|dev enable devices
exit leave UKC
find devno|dev find devices
help this message
list list configuration
lines [count] number of lines before more
quit leave UKC
show [attr [val]] show attributes (or devices with an attribute)
timezone [mins [dst]] set timezone/dst
verbose toggle verbose booting
? this message
UKC> disable acpi
493 acpi0 disabled
UKC> exit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/05/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf0710 (30 entries)
bios0: vendor American Megatrends Inc. version "1301" date 08/05/2008
bios0: ASUSTeK Computer INC. 901
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 5 is type PCI
mpbios0: bus 6 is type PCI
mpbios0: bus 7 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf85d0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GBM LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xec00!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2406000c24
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1601 MHz: speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x600
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
pci1 at ppb0 bus 5
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci2 at ppb1 bus 4
ale0 at pci2 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113, msi,
address 00:22:15:ed:f6:3d
atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 19
pci4 at ppb3 bus 1
ral0 at pci4 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 1 int 19, address
00:22:43:00:1d:12
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 5
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 3
pci_intr_map: no MP mapping found
pci5 at ppb4 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <ASUS-PHISON SSD>
wd0: 1-sector PIO, LBA, 3847MB, 7880544 sectors
wd1 at pciide0 channel 1 drive 1: <ASUS-PHISON SSD>
wd1: 1-sector PIO, LBA, 7695MB, 15761088 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2, firmware 0x20030
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.05 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Single, Flash Reader, 1.00> SCSI0 0/direct
removable serial.058f6335058F63356336
sd0: 7580MB, 512 bytes/sector, 15523840 sectors
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. CNF7129" rev 2.00/15.44 addr 3
video0 at uvideo0
ugen0 at uhub4 port 1 "Broadcom Corp BT-253" rev 2.00/2.41 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b
