Mark,
I know that below reply is to Alexander's email, but just to be sure, do
you need my dumps again also, as I did send acpidump files in my initial
report.
On Sun, Jul 06, 2014 at 11:19:02PM +0200, Mark Kettenis wrote:
> Thanks, please send me acpidump -o output, and indicate at exactly
> what the last dmesg line is that gets prited. Might be necessary to
> disable inteldrm to pin that down.
I'm not sure what should be disabled to stop screen getting black, when
machine freezes, as I've tried disabling vga, intagp, agp, inteldrm, and
drm without success. Screen is getting blank, and I'm not sure what is
written as the very last line when freeze occurs. I've used find
<driver> in UKC to see how the driver is defined and I'm disabling it in
all ways it's reported. For example:
ukc> find vga
56 vga* at pci* dev -1 function -1 flags 0x0
276 vga0 at isa0 port -1 size 0 iomem -1 iosiz 0 irq -1 drq -1 drq2 -1 flags 0x0
Disabling both, vga0 and vga*:
ukc> disable vga*
56 vga* disabled
ukc> disable vga0
276 vga0 disabled
Looking at the lines printed, my impression was that acpiasus0 at acpi0
is the last line before screen goes blank, so I've disabled acpiasus and
it did help and machine boots fine. Here is dmesg from that boot:
OpenBSD 5.5-current (GENERIC.MP) #225: Tue Jul 8 12:07:24 MDT 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1064464384 (1015MB)
avail mem = 1034616832 (986MB)
User Kernel Config
UKC> disable acpiasus*
506 acpiasus* disabled
UKC> quit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/14/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06f0 (30 entries)
bios0: vendor American Megatrends Inc. version "0702" date 07/14/2008
bios0: ASUSTeK Computer INC. 1000
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) P0P4(S4) P0P6(S4) P0P7(S4) P0P8(S4)
P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P4)
acpiprt2 at acpi0: bus 3 (P0P6)
acpiprt3 at acpi0: bus 1 (P0P7)
acpiprt4 at acpi0: bus -1 (P0P8)
acpiprt5 at acpi0: bus -1 (P0P9)
acpiprt6 at acpi0: bus 4 (P0P5)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 model "1000" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit offline
acpiasus at acpi0 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1601 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
composite sync not supported
composite sync not supported
inteldrm0: 1024x600
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 5
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 4
ale0 at pci2 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113, msi,
address 00:22:15:65:26:97
atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 18
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int 19
pci4 at ppb3 bus 1
ral0 at pci4 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 2 int 19, address
00:15:af:cb:45:e3
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <ASUS-PHISON SSD>
wd0: 1-sector PIO, LBA, 7695MB, 15761088 sectors
wd1 at pciide0 channel 1 drive 1: <ASUS-PHISON SSD>
wd1: 1-sector PIO, LBA, 30783MB, 63045360 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2, firmware 0x20030
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. CNF7129" rev 2.00/15.18 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (fd201f41a2892253.a) swap on wd0b dump on wd0b
--
best regards
q#
