>Synopsis: device timeout after some minutes of use with athn(4)
>Category: wireless
>Environment:
System : OpenBSD 5.8
Details : OpenBSD 5.8-current (GENERIC.MP) #1377: Wed Sep 23
20:48:11 MDT 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
After some minutes of use the athn(4) device times out and no more
traffic goes through the interface.
athn0 at uhub3 port 2 configuration 1 interface 0 "NETGEAR WNA WNA1100"
rev 2.00/1.08 addr 4
athn0: AR9271 rev 1 (1T1R), ROM rev 15, address e0:46:9a:09:d9:65
athn0: device timeout
>How-To-Repeat:
Use athn(4) "NETGEAR WNA WNA1100" for some minutes,
increasing sc->sc_tx_timer in if_athn_usb.c does not help.
>Fix:
The only workaround known is to unplug the device and then plug it again
dmesg:
OpenBSD 5.8-current (GENERIC.MP) #1377: Wed Sep 23 20:48:11 MDT 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3835400192 (3657MB)
avail mem = 3715055616 (3542MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae3a000 (60 entries)
bios0: vendor LENOVO version "H5ET69WW (1.12 )" date 11/15/2012
bios0: LENOVO 62742QG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI UEFI
MSDM UEFI DBG2
acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, 2295.13 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, 2294.79 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, 2294.79 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, 2294.79 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus 3 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu2 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu3 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 83 degC
acpitz1 at acpi0: critical temperature is 126 degC
acpibat0 at acpi0: BAT0 model "45N1045" serial 2329 type LION oem
"313100504d53"
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2300, 2200, 2100, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
"Broadcom BCM4313" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address 3c:97:0e:68:d9:86
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 1: 1.5Gb/s
ahci0: port 4: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, TOSHIBA MK5065GS, GJ10> SCSI3 0/direct
fixed naa.50000394723069b8
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 4 lun 0: <PLDS, DVD-RW DS8A8SH, KL31> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub3 port 5 configuration 1 interface 0 "Vimicro corp. Integrated
Camera" rev 2.00/14.10 addr 3
video0 at uvideo0
uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub4 port 6 configuration 1 interface 0 "Generic Flash Card
Reader/Writer" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Multiple, Card Reader, 1.00> SCSI0 0/direct
removable serial.058f6366058F63666435
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (9bcc7c326ee6bd8b.a) swap on sd0b dump on sd0b
error: [drm:pid10047:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed...
render ring idle
error: [drm:pid10047:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed...
bsd ring idle
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 98125MB, 512 bytes/sector, 200961612 sectors
athn0 at uhub3 port 2 configuration 1 interface 0 "NETGEAR WNA WNA1100" rev
2.00/1.08 addr 4
athn0: AR9271 rev 1 (1T1R), ROM rev 15, address e0:46:9a:09:d9:65
athn0: device timeout
athn0 detached
usbdevs:
Controller /dev/usb0:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 disabled
port 2 disabled
port 3 disabled
port 4 disabled
port 5 disabled
port 6 disabled
port 7 disabled
port 8 disabled
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x0024),
Intel(0x8087), rev 0.00
port 1 powered
port 2 addr 4: high speed, power 500 mA, config 1, WNA1100(0x9030), NETGEAR
WNA(0x0846), rev 1.08, iSerialNumber 12345
port 3 powered
port 4 powered
port 5 addr 3: high speed, power 256 mA, config 1, Integrated Camera(0x0295),
Vimicro corp.(0x5986), rev 14.10
port 6 powered
port 2 powered
port 3 powered
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x0024),
Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 3: high speed, power 250 mA, config 1, Flash Card
Reader/Writer(0x6366), Generic(0x058f), rev 1.00, iSerialNumber 058F63666435
port 7 powered
port 8 powered
port 2 powered
port 3 powered
