Dear Sirs!

I just tested the CDROM drive with a Fujitsu Siemes Futro A220 (geode,
single core) and OpenBSD 5.8. It works pefectly.

The Problem is with the Asus E35M1-M main board. I regret that I bought it. Not only due to this issue I cannot recommend it.

It seems that the dmesg in my previous report is not complete.
I did it with copy and paste with ddb results. Next time I try to do it with cu escape commands. I add at the end of this posting the result
of dmesg command.

Best regards
Rodrigo.



-----------------------------------

OpenBSD 5.8 (GENERIC.MP) #1098: Sun Aug 16 02:38:27 MDT 2015
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD E-350 Processor ("AuthenticAMD" 686-class, 512KB L2 cache) 1.65 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,NXE,MMXX,FFXSR,PAGE1GB,LONG,SSE3,MWAIT,SSSE3,CX16,POPCNT,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,WDT,ITSC
real mem  = 1725140992 (1645MB)
avail mem = 1678155776 (1600MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/16/10, SMBIOS rev. 2.6 @ 0xe9220 (60 entries)
bios0:
bios0: ASUSTeK COMPUTER INC. E35M1-M
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT
acpi0: wakeup devices SBAZ(S4) PS2K(S4) PS2M(S4) UAR1(S4) P0PC(S4) UHC1(S4) 
UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) BR14(S4) PE20(S4) 
PE21(S4) RLAN(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 206MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD E-350 Processor ("AuthenticAMD" 686-class, 512KB L2 cache) 1.65 GHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,NXE,MMXX,FFXSR,PAGE1GB,LONG,SSE3,MWAIT,SSSE3,CX16,POPCNT,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,WDT,ITSC
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 3, remapped to apid 0
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (BR15)
acpiprt2 at acpi0: bus -1 (PCE6)
acpiprt3 at acpi0: bus -1 (PCE7)
acpiprt4 at acpi0: bus -1 (PCE8)
acpiprt5 at acpi0: bus 1 (BR14)
acpiprt6 at acpi0: bus 3 (PE20)
acpiprt7 at acpi0: bus 4 (PE21)
acpiprt8 at acpi0: bus 5 (PE22)
acpiprt9 at acpi0: bus 6 (BR23)
acpiprt10 at acpi0: bus -1 (PE23)
acpicpu0 at acpi0: !C2(0@100 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@100 io@0x1771), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000
cpu0: 1649 MHz: speeds: 1600 1280 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6310" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: apic 0 int 16
pci1 at ppb0 bus 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 0 int 19, AHCI 
1.2
scsibus1 at ahci0: 32 targets
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=10 
0b=10 0c=10 0d=10 0e=09 0f=94 10=00 11=00 12=00 13=00 14=00 15=10 16=09 17=b0 
18=40 19=9a 1a=b3 1b=a8 1c=b6 1d=80 1e=0c 1f=03 20=09 21=09 22=09 23=09 24=03 
3e=cf words 00=ff00 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 0 int 16
azalia1: codecs: Realtek/0x0887
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci2 at ppb1 bus 2
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), 
msi, address f4:6d:04:d6:0b:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ppb4 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01
pci6 at ppb5 bus 6
athn0 at pci6 dev 0 function 0 "Atheros AR9227" rev 0x01: apic 0 int 18
athn0: AR9287 rev 2 (2T2R), ROM rev 4, address f8:d1:11:6e:72:6f
"VIA VT6306 FireWire" rev 0xc0 at pci6 dev 2 function 0 not configured
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0x290/8: NCT6776F
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub4 port 4 configuration 1 interface 0 "MOON AND" rev 1.00/0.10 
addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
PXE boot MAC address f4:6d:04:d6:0b:41, interface re0
nfs_boot: using interface re0, with revarp & bootparams
nfs_boot: client_addr=10.0.0.30
nfs_boot: server_addr=10.0.0.1 hostname=E35M1M
root on 10.0.0.1:/export/E35M1M/root
nfs_boot: bootparam get swap: 60
WARNING: no swap
r600_cp: Failed to load firmware "radeon-palm_pfp"
error: [drm:pid0:evergreen_startup] *ERROR* Failed to load firmware!
drm:pid0:evergreen_init *ERROR* disabling GPU acceleration
drm:pid0:radeon_bo_unpin *WARNING* 0xd8abd19c unpin not necessary
drm:pid0:radeon_bo_unpin *WARNING* 0xd8abd19c unpin not necessary
radeondrm0: 1280x1024
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)


Reply via email to