Hi haven't had a chance to grab a new snapshot yet, but did
rebuild kernel, userland and xenocara.
The issue is still there, but playing more with the touchpad, it
seems that the touchpad (or the modified driver) now requires
three (3) fingers on the touchpad for moving the pointer around.
So the regression is:
* Can't move pointer around with single finger.
* Can't single or two- finger tap/click on the touchpad.
* Can't two-finger scroll (neither horizontal nor vertical).
Still intend to update to a new snapshot (not sure when).
Might be configuration issue, but I haven't picked up on any
new relevant settings:
$ synclient
Parameter settings:
LeftEdge = 1780
RightEdge = 5576
TopEdge = 1687
BottomEdge = 5123
FingerLow = 25
FingerHigh = 30
MaxTapTime = 180
MaxTapMove = 261
MaxDoubleTapTime = 100
SingleTapTimeout = 180
ClickTime = 100
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 119
HorizScrollDelta = 119
VertEdgeScroll = 0
HorizEdgeScroll = 0
CornerCoasting = 0
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 1
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.0336078
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 3
TapButton3 = 2
ClickFinger1 = 1
ClickFinger2 = 0
ClickFinger3 = 0
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 0
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 29
VertHysteresis = 29
ClickPad = 0
--patrick
On 4/11/16, patrick keshishian <[email protected]> wrote:
> Ignore this for now.
>
> this may be (probably is) due to the fact X driver is out of sync with
> the kernel. i'll report back after I build a new set of X, or better yet,
> try a new snapshot.
>
> --patrick
>
> On 4/11/16, patrick keshishian <[email protected]> wrote:
>>>Synopsis: regression with -r1.69 pms0 w/Synaptics touchpad lenovo x120e
>>>Category: kernel pms driver
>>>Environment:
>> System : OpenBSD 5.9
>> Details : OpenBSD 5.9-current (GENERIC.MP) #3: Mon Apr 11 14:16:42
>> PDT
>> 2016
>>
>> sidster@local:/usr/build/src/sys/arch/amd64/compile/GENERIC.MP
>>
>> Architecture: OpenBSD.amd64
>> Machine : amd64
>>>Description:
>> With revision 1.69 of pms.c the touchpad no longer is capable
>> of moving the mouse pointer (at least in X). Physical buttons
>> (left + right) seem to work. However, double clicking the touchpad
>> acts as middle button, pasting copy buffer into an xterm as an
>> example.
>>
>>>How-To-Repeat:
>> Compile kernel with pms.c revision 1.69 and reboot.
>>>Fix:
>> The diff -r1.68 -r1.69 is quite large and beyond my pay-grade.
>> Reverting to -r1.68 is a work-around for me.
>>
>> dmesg:
>> OpenBSD 5.9-current (GENERIC.MP) #3: Mon Apr 11 14:16:42 PDT 2016
>> sidster@local:/usr/build/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 3850960896 (3672MB)
>> avail mem = 3730014208 (3557MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf9ba0 (60 entries)
>> bios0: vendor LENOVO version "8FET32WW (1.16 )" date 11/03/2011
>> bios0: LENOVO 06112EU
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S3 S4 S5
>> acpi0: tables DSDT FACP SLIC HPET APIC MCFG UEFI UEFI SSDT SSDT UEFI
>> acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S3)
>> OHC2(S3) EHC2(S3) OHC3(S3) EHC3(S3) OHC4(S3) SBAZ(S4) GEC_(S4)
>> P2P_(S5) SPB0(S4) SPB1(S4) SPB2(S4) [...]
>> acpitimer0 at acpi0: 3579545 Hz, 32 bits
>> acpihpet0 at acpi0: 14318180 Hz
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: AMD E-350 Processor, 13093.27 MHz
>> cpu0:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
>> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
>> 64b/line 16-way L2 cache
>> cpu0: 8 4MB entries fully associative
>> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
>> associative
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 199MHz
>> cpu0: mwait min=64, max=64, IBE
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: AMD E-350 Processor, 1596.60 MHz
>> cpu1:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
>> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
>> 64b/line 16-way L2 cache
>> cpu1: 8 4MB entries fully associative
>> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully
>> associative
>> cpu1: smt 0, core 1, package 0
>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
>> ioapic0: misconfigured as apic 0, remapped to apid 2
>> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-31
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus -1 (PB4_)
>> acpiprt2 at acpi0: bus -1 (PB5_)
>> acpiprt3 at acpi0: bus 1 (PB6_)
>> acpiprt4 at acpi0: bus -1 (PB7_)
>> acpiprt5 at acpi0: bus 2 (P2P_)
>> acpiprt6 at acpi0: bus 3 (SPB0)
>> acpiprt7 at acpi0: bus 4 (SPB1)
>> acpiprt8 at acpi0: bus -1 (SPB2)
>> acpiprt9 at acpi0: bus -1 (SPB3)
>> acpiec0 at acpi0
>> acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS
>> acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS
>> acpitz0 at acpi0: critical temperature is 92 degC
>> acpibtn0 at acpi0: PWRB
>> acpibtn1 at acpi0: SLPB
>> "PNP0303" at acpi0 not configured
>> "LEN0017" at acpi0 not configured
>> "PNP0C09" at acpi0 not configured
>> acpithinkpad0 at acpi0
>> acpiac0 at acpi0: AC unit online
>> acpibat0 at acpi0: BAT1 model "42T4785" serial 3355 type LION oem
>> "SANYO"
>> acpibtn2 at acpi0: LID_
>> "PNP0C14" at acpi0 not configured
>> "PNP0C14" at acpi0 not configured
>> acpivideo0 at acpi0: VGA_
>> acpivideo1 at acpi0: VGA_
>> cpu0: 13093 MHz: speeds: 1600 1280 800 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
>> radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6310" rev 0x00
>> drm0 at radeondrm0
>> radeondrm0: msi
>> azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00:
>> msi
>> azalia0: no supported codecs
>> ppb0 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
>> pci1 at ppb0 bus 1
>> 1:0:0: mem address conflict 0xfffe0000/0x20000
>> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
>> (0x2800), msi, address e8:9a:8f:66:06:38
>> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
>> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int
>> 19, AHCI 1.2
>> ahci0: port 0: 3.0Gb/s
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3
>> 0/direct fixed naa.50000391c6887a53
>> sd0: 238475MB, 512 bytes/sector, 488397168 sectors
>> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int
>> 18, version 1.0, legacy support
>> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
>> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int
>> 18, version 1.0, legacy support
>> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
>> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
>> iic0 at piixpm0
>> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
>> spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
>> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2
>> int
>> 16
>> azalia1: codecs: Conexant/0x5066
>> audio0 at azalia1
>> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
>> ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
>> pci2 at ppb1 bus 2
>> ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
>> pci3 at ppb2 bus 3
>> ppb3 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00: msi
>> pci4 at ppb3 bus 4
>> rtwn0 at pci4 dev 0 function 0 "Realtek 8188CE" rev 0x01: msi
>> rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address d0:df:9a:1a:85:c1
>> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
>> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
>> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
>> km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
>> pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
>> pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
>> pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
>> pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
>> usb2 at ohci0: USB revision 1.0
>> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at ohci1: USB revision 1.0
>> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> pckbd0 at pckbc0 (kbd slot)
>> wskbd0 at pckbd0: console keyboard
>> pms0 at pckbc0 (aux slot)
>> wsmouse0 at pms0 mux 0
>> wsmouse1 at pms0 mux 0
>> pms0: Synaptics touchpad, firmware 7.5
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> umass0 at uhub1 port 2 configuration 1 interface 0 "Generic
>> USB2.0-CRW" rev 2.00/58.88 addr 2
>> umass0: using SCSI over Bulk-Only
>> scsibus2 at umass0: 2 targets, initiator 0
>> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
>> 0/direct removable serial.0bda0158114173400000
>> uvideo0 at uhub1 port 5 configuration 1 interface 0 "Image Processor
>> Integrated Camera" rev 2.00/0.29 addr 3
>> video0 at uvideo0
>> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft
>> Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2
>> uhidev0: iclass 3/1
>> ums0 at uhidev0: 3 buttons, Z dir
>> wsmouse2 at ums0 mux 0
>> vscsi0 at root
>> scsibus3 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus4 at softraid0: 256 targets
>> root on sd0a (327c43bb666f37a4.a) swap on sd0b dump on sd0b
>> radeondrm0: 1366x768
>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
>> wskbd0
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>>
>> usbdevs:
>> Controller /dev/usb0:
>> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
>> ATI(0x1002), rev 1.00
>> port 1 powered
>> port 2 powered
>> port 3 powered
>> port 4 powered
>> port 5 powered
>> Controller /dev/usb1:
>> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
>> ATI(0x1002), rev 1.00
>> port 1 powered
>> port 2 addr 2: high speed, power 500 mA, config 1,
>> USB2.0-CRW(0x0158), Generic(0x0bda), rev 58.88, iSerialNumber
>> 20071114173400000
>> port 3 powered
>> port 4 powered
>> port 5 addr 3: high speed, power 500 mA, config 1, Integrated
>> Camera(0x01a6), Image Processor(0x5986), rev 0.29, iSerialNumber
>> Integrated Camera
>> Controller /dev/usb2:
>> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
>> ATI(0x1002), rev 1.00
>> port 1 powered
>> port 2 addr 2: low speed, power 100 mA, config 1, Microsoft 3-Button
>> Mouse with IntelliEye(TM)(0x0053), Microsoft(0x045e), rev 3.00
>> port 3 powered
>> port 4 powered
>> port 5 powered
>> Controller /dev/usb3:
>> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
>> ATI(0x1002), rev 1.00
>> port 1 powered
>> port 2 powered
>> port 3 powered
>> port 4 powered
>> port 5 powered
>>
>
