Hi, are you sure that you have used the latest sources? Your description of the errors suggests that pms still produces "W-mode" values (which map a contact count of three to the W-value 1, two to 0, and one to something in the range of 4 to 15). Could you check the version of pms.c? The new version of the synaptics driver expects plain contact counts in W.
On 04/15/2016 01:18 AM, patrick keshishian wrote: > Hi haven't had a chance to grab a new snapshot yet, but did > rebuild kernel, userland and xenocara. > > The issue is still there, but playing more with the touchpad, it > seems that the touchpad (or the modified driver) now requires > three (3) fingers on the touchpad for moving the pointer around. > > So the regression is: > * Can't move pointer around with single finger. > * Can't single or two- finger tap/click on the touchpad. > * Can't two-finger scroll (neither horizontal nor vertical). > > Still intend to update to a new snapshot (not sure when). > > Might be configuration issue, but I haven't picked up on any > new relevant settings: > > $ synclient > Parameter settings: > LeftEdge = 1780 > RightEdge = 5576 > TopEdge = 1687 > BottomEdge = 5123 > FingerLow = 25 > FingerHigh = 30 > MaxTapTime = 180 > MaxTapMove = 261 > MaxDoubleTapTime = 100 > SingleTapTimeout = 180 > ClickTime = 100 > EmulateMidButtonTime = 75 > EmulateTwoFingerMinZ = 282 > EmulateTwoFingerMinW = 7 > VertScrollDelta = 119 > HorizScrollDelta = 119 > VertEdgeScroll = 0 > HorizEdgeScroll = 0 > CornerCoasting = 0 > VertTwoFingerScroll = 1 > HorizTwoFingerScroll = 1 > MinSpeed = 1 > MaxSpeed = 1.75 > AccelFactor = 0.0336078 > TouchpadOff = 0 > LockedDrags = 0 > LockedDragTimeout = 5000 > RTCornerButton = 0 > RBCornerButton = 0 > LTCornerButton = 0 > LBCornerButton = 0 > TapButton1 = 1 > TapButton2 = 3 > TapButton3 = 2 > ClickFinger1 = 1 > ClickFinger2 = 0 > ClickFinger3 = 0 > CircularScrolling = 0 > CircScrollDelta = 0.1 > CircScrollTrigger = 0 > CircularPad = 0 > PalmDetect = 0 > PalmMinWidth = 10 > PalmMinZ = 200 > CoastingSpeed = 20 > CoastingFriction = 50 > PressureMotionMinZ = 30 > PressureMotionMaxZ = 160 > PressureMotionMinFactor = 1 > PressureMotionMaxFactor = 1 > GrabEventDevice = 0 > TapAndDragGesture = 1 > AreaLeftEdge = 0 > AreaRightEdge = 0 > AreaTopEdge = 0 > AreaBottomEdge = 0 > HorizHysteresis = 29 > VertHysteresis = 29 > ClickPad = 0 > > > --patrick > > > On 4/11/16, patrick keshishian <[email protected]> wrote: >> Ignore this for now. >> >> this may be (probably is) due to the fact X driver is out of sync with >> the kernel. i'll report back after I build a new set of X, or better yet, >> try a new snapshot. >> >> --patrick >> >> On 4/11/16, patrick keshishian <[email protected]> wrote: >>>> Synopsis: regression with -r1.69 pms0 w/Synaptics touchpad lenovo x120e >>>> Category: kernel pms driver >>>> Environment: >>> System : OpenBSD 5.9 >>> Details : OpenBSD 5.9-current (GENERIC.MP) #3: Mon Apr 11 14:16:42 >>> PDT >>> 2016 >>> >>> sidster@local:/usr/build/src/sys/arch/amd64/compile/GENERIC.MP >>> >>> Architecture: OpenBSD.amd64 >>> Machine : amd64 >>>> Description: >>> With revision 1.69 of pms.c the touchpad no longer is capable >>> of moving the mouse pointer (at least in X). Physical buttons >>> (left + right) seem to work. However, double clicking the touchpad >>> acts as middle button, pasting copy buffer into an xterm as an >>> example. >>> >>>> How-To-Repeat: >>> Compile kernel with pms.c revision 1.69 and reboot. >>>> Fix: >>> The diff -r1.68 -r1.69 is quite large and beyond my pay-grade. >>> Reverting to -r1.68 is a work-around for me. >>> >>> dmesg: >>> OpenBSD 5.9-current (GENERIC.MP) #3: Mon Apr 11 14:16:42 PDT 2016 >>> sidster@local:/usr/build/src/sys/arch/amd64/compile/GENERIC.MP >>> real mem = 3850960896 (3672MB) >>> avail mem = 3730014208 (3557MB) >>> mpath0 at root >>> scsibus0 at mpath0: 256 targets >>> mainbus0 at root >>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf9ba0 (60 entries) >>> bios0: vendor LENOVO version "8FET32WW (1.16 )" date 11/03/2011 >>> bios0: LENOVO 06112EU >>> acpi0 at bios0: rev 2 >>> acpi0: sleep states S0 S3 S4 S5 >>> acpi0: tables DSDT FACP SLIC HPET APIC MCFG UEFI UEFI SSDT SSDT UEFI >>> acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S3) >>> OHC2(S3) EHC2(S3) OHC3(S3) EHC3(S3) OHC4(S3) SBAZ(S4) GEC_(S4) >>> P2P_(S5) SPB0(S4) SPB1(S4) SPB2(S4) [...] >>> acpitimer0 at acpi0: 3579545 Hz, 32 bits >>> acpihpet0 at acpi0: 14318180 Hz >>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>> cpu0 at mainbus0: apid 0 (boot processor) >>> cpu0: AMD E-350 Processor, 13093.27 MHz >>> cpu0: >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC >>> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB >>> 64b/line 16-way L2 cache >>> cpu0: 8 4MB entries fully associative >>> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully >>> associative >>> cpu0: smt 0, core 0, package 0 >>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >>> cpu0: apic clock running at 199MHz >>> cpu0: mwait min=64, max=64, IBE >>> cpu1 at mainbus0: apid 1 (application processor) >>> cpu1: AMD E-350 Processor, 1596.60 MHz >>> cpu1: >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC >>> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB >>> 64b/line 16-way L2 cache >>> cpu1: 8 4MB entries fully associative >>> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully >>> associative >>> cpu1: smt 0, core 1, package 0 >>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins >>> ioapic0: misconfigured as apic 0, remapped to apid 2 >>> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-31 >>> acpiprt0 at acpi0: bus 0 (PCI0) >>> acpiprt1 at acpi0: bus -1 (PB4_) >>> acpiprt2 at acpi0: bus -1 (PB5_) >>> acpiprt3 at acpi0: bus 1 (PB6_) >>> acpiprt4 at acpi0: bus -1 (PB7_) >>> acpiprt5 at acpi0: bus 2 (P2P_) >>> acpiprt6 at acpi0: bus 3 (SPB0) >>> acpiprt7 at acpi0: bus 4 (SPB1) >>> acpiprt8 at acpi0: bus -1 (SPB2) >>> acpiprt9 at acpi0: bus -1 (SPB3) >>> acpiec0 at acpi0 >>> acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS >>> acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS >>> acpitz0 at acpi0: critical temperature is 92 degC >>> acpibtn0 at acpi0: PWRB >>> acpibtn1 at acpi0: SLPB >>> "PNP0303" at acpi0 not configured >>> "LEN0017" at acpi0 not configured >>> "PNP0C09" at acpi0 not configured >>> acpithinkpad0 at acpi0 >>> acpiac0 at acpi0: AC unit online >>> acpibat0 at acpi0: BAT1 model "42T4785" serial 3355 type LION oem >>> "SANYO" >>> acpibtn2 at acpi0: LID_ >>> "PNP0C14" at acpi0 not configured >>> "PNP0C14" at acpi0 not configured >>> acpivideo0 at acpi0: VGA_ >>> acpivideo1 at acpi0: VGA_ >>> cpu0: 13093 MHz: speeds: 1600 1280 800 MHz >>> pci0 at mainbus0 bus 0 >>> pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 >>> radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6310" rev 0x00 >>> drm0 at radeondrm0 >>> radeondrm0: msi >>> azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: >>> msi >>> azalia0: no supported codecs >>> ppb0 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi >>> pci1 at ppb0 bus 1 >>> 1:0:0: mem address conflict 0xfffe0000/0x20000 >>> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D >>> (0x2800), msi, address e8:9a:8f:66:06:38 >>> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 >>> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int >>> 19, AHCI 1.2 >>> ahci0: port 0: 3.0Gb/s >>> scsibus1 at ahci0: 32 targets >>> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3 >>> 0/direct fixed naa.50000391c6887a53 >>> sd0: 238475MB, 512 bytes/sector, 488397168 sectors >>> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int >>> 18, version 1.0, legacy support >>> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 >>> usb0 at ehci0: USB revision 2.0 >>> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >>> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int >>> 18, version 1.0, legacy support >>> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 >>> usb1 at ehci1: USB revision 2.0 >>> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >>> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling >>> iic0 at piixpm0 >>> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM >>> spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM >>> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 >>> int >>> 16 >>> azalia1: codecs: Conexant/0x5066 >>> audio0 at azalia1 >>> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 >>> ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 >>> pci2 at ppb1 bus 2 >>> ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00 >>> pci3 at ppb2 bus 3 >>> ppb3 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00: msi >>> pci4 at ppb3 bus 4 >>> rtwn0 at pci4 dev 0 function 0 "Realtek 8188CE" rev 0x01: msi >>> rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address d0:df:9a:1a:85:c1 >>> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 >>> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 >>> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 >>> km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 >>> pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 >>> pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 >>> pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 >>> pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 >>> usb2 at ohci0: USB revision 1.0 >>> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >>> usb3 at ohci1: USB revision 1.0 >>> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >>> isa0 at pcib0 >>> isadma0 at isa0 >>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >>> pckbd0 at pckbc0 (kbd slot) >>> wskbd0 at pckbd0: console keyboard >>> pms0 at pckbc0 (aux slot) >>> wsmouse0 at pms0 mux 0 >>> wsmouse1 at pms0 mux 0 >>> pms0: Synaptics touchpad, firmware 7.5 >>> pcppi0 at isa0 port 0x61 >>> spkr0 at pcppi0 >>> umass0 at uhub1 port 2 configuration 1 interface 0 "Generic >>> USB2.0-CRW" rev 2.00/58.88 addr 2 >>> umass0: using SCSI over Bulk-Only >>> scsibus2 at umass0: 2 targets, initiator 0 >>> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 >>> 0/direct removable serial.0bda0158114173400000 >>> uvideo0 at uhub1 port 5 configuration 1 interface 0 "Image Processor >>> Integrated Camera" rev 2.00/0.29 addr 3 >>> video0 at uvideo0 >>> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft >>> Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2 >>> uhidev0: iclass 3/1 >>> ums0 at uhidev0: 3 buttons, Z dir >>> wsmouse2 at ums0 mux 0 >>> vscsi0 at root >>> scsibus3 at vscsi0: 256 targets >>> softraid0 at root >>> scsibus4 at softraid0: 256 targets >>> root on sd0a (327c43bb666f37a4.a) swap on sd0b dump on sd0b >>> radeondrm0: 1366x768 >>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using >>> wskbd0 >>> wsdisplay0: screen 1-5 added (std, vt100 emulation) >>> >>> usbdevs: >>> Controller /dev/usb0: >>> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), >>> ATI(0x1002), rev 1.00 >>> port 1 powered >>> port 2 powered >>> port 3 powered >>> port 4 powered >>> port 5 powered >>> Controller /dev/usb1: >>> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), >>> ATI(0x1002), rev 1.00 >>> port 1 powered >>> port 2 addr 2: high speed, power 500 mA, config 1, >>> USB2.0-CRW(0x0158), Generic(0x0bda), rev 58.88, iSerialNumber >>> 20071114173400000 >>> port 3 powered >>> port 4 powered >>> port 5 addr 3: high speed, power 500 mA, config 1, Integrated >>> Camera(0x01a6), Image Processor(0x5986), rev 0.29, iSerialNumber >>> Integrated Camera >>> Controller /dev/usb2: >>> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), >>> ATI(0x1002), rev 1.00 >>> port 1 powered >>> port 2 addr 2: low speed, power 100 mA, config 1, Microsoft 3-Button >>> Mouse with IntelliEye(TM)(0x0053), Microsoft(0x045e), rev 3.00 >>> port 3 powered >>> port 4 powered >>> port 5 powered >>> Controller /dev/usb3: >>> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), >>> ATI(0x1002), rev 1.00 >>> port 1 powered >>> port 2 powered >>> port 3 powered >>> port 4 powered >>> port 5 powered >>> >> > >
