On 21/09/16(Wed) 13:32, Heiko Zimmermann wrote: > Hello Martin, > > here are the requested outputs. > Thank you in advance.
Who is '78:fe:3d:46:ed:9d' You can crank net.inet6.icmp6.nd6_debug to see if you get more information about why it can be resolved in -current. > > Heiko > > > OpenBSD Current // fe80::1%re0 > ############################## > # route -n show -inet6 > Routing tables > > Internet6: > Destination Gateway Flags > Refs Use Mtu Prio Iface > default fe80::1%re0 UGS > 2 931 - 8 re0 > ::/96 ::1 UGRS > 0 0 32768 8 lo0 > ::/104 ::1 UGRS > 0 0 32768 8 lo0 > ::1 ::1 UHhl > 14 28 32768 1 lo0 > ::127.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::224.0.0.0/100 ::1 UGRS > 0 0 32768 8 lo0 > ::255.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::ffff:0.0.0.0/96 ::1 UGRS > 0 0 32768 8 lo0 > 2002::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:7f00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:e000::/20 ::1 UGRS > 0 0 32768 8 lo0 > 2002:ff00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::2 UCPn > 0 3 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::157:76 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::37:253 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::157:80 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::2 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > > 2a01:4f8:160:4346::37:253 54:04:a6:b4:99:c2 UHLl > 0 17 - 1 re0 > > 2a01:4f8:160:4346::157:76 54:04:a6:b4:99:c2 UHLl > 0 459 - 1 re0 > > 2a01:4f8:160:4346::157:80 54:04:a6:b4:99:c2 UHLl > 0 57 - 1 re0 > > fe80::/10 ::1 UGRS > 0 1 32768 8 lo0 > > fec0::/10 ::1 UGRS > 0 0 32768 8 lo0 > > fe80::%re0/64 fe80::5604:a6ff:feb4:99c2%re0 UCn > 1 0 - 4 re0 > > fe80::1%re0 link#1 UHLch > 1 3 - 4 re0 > > fe80::5604:a6ff:feb4:99c2%re0 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > > fe80::1%lo0 fe80::1%lo0 UHl > 0 0 32768 1 lo0 > > ff01::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff01::%re0/32 fe80::5604:a6ff:feb4:99c2%re0 Um > 0 4 - 4 re0 > ff01::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > ff02::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff02::%re0/32 fe80::5604:a6ff:feb4:99c2%re0 Um > 0 4 - 4 re0 > ff02::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > > > OpenBSD 6.0 // fe80::1%re0 > the ipv6 is working, when I first ping6 the gateway fe80::1%re0, before > I ping6 nothing is working > it was always so, I had a misc ticket ca. one year ago to this > ############################## > # route -n show -inet6 > Routing tables > > Internet6: > Destination Gateway Flags > Refs Use Mtu Prio Iface > default fe80::1%re0 UGS > 6 51 - 8 re0 > ::/96 ::1 UGRS > 0 0 32768 8 lo0 > ::/104 ::1 UGRS > 0 0 32768 8 lo0 > ::1 ::1 UHl > 14 14 32768 1 lo0 > ::127.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::224.0.0.0/100 ::1 UGRS > 0 0 32768 8 lo0 > ::255.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::ffff:0.0.0.0/96 ::1 UGRS > 0 0 32768 8 lo0 > 2002::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:7f00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:e000::/20 ::1 UGRS > 0 0 32768 8 lo0 > 2002:ff00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::2 UCPn > 0 3 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::157:76 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::37:253 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::157:80 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::2 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > 2a01:4f8:160:4346::37:253 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > 2a01:4f8:160:4346::157:76 54:04:a6:b4:99:c2 UHLl > 0 19 - 1 re0 > 2a01:4f8:160:4346::157:80 54:04:a6:b4:99:c2 UHLl > 0 30 - 1 re0 > fe80::/10 ::1 UGRS > 0 3 32768 8 lo0 > fec0::/10 ::1 UGRS > 0 0 32768 8 lo0 > fe80::%re0/64 fe80::5604:a6ff:feb4:99c2%re0 UCn > 1 0 - 4 re0 > fe80::1%re0 78:fe:3d:46:ed:9d UHLc > 1 4 - 4 re0 > fe80::5604:a6ff:feb4:99c2%re0 54:04:a6:b4:99:c2 UHLl > 0 9 - 1 re0 > fe80::1%lo0 fe80::1%lo0 UHl > 0 0 32768 1 lo0 > ff01::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff01::%re0/32 fe80::5604:a6ff:feb4:99c2%re0 Um > 0 4 - 4 re0 > ff01::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > ff02::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff02::%re0/32 fe80::5604:a6ff:feb4:99c2%re0 Um > 0 5 - 4 re0 > ff02::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > > > OpenBSD current //New hostname.re0 > ################################## > # cat /etc/hostname.re0 > inet 176.9.157.76 255.255.255.224 > inet alias 88.198.37.253 255.255.255.248 > inet alias 176.9.157.80. > !route add 88.198.37.249 88.198.37.253 > inet6 2a01:4f8:160:4346::2 64 > inet6 alias 2a01:4f8:160:4346::157:76 64 > inet6 alias 2a01:4f8:160:4346::37:253 64 > inet6 alias 2a01:4f8:160:4346::157:80 64 > !route add -inet6 default fe80::5604:a6ff:feb4:99c2%re0 > > > OpenBSD Current // fe80::5604:a6ff:feb4:99c2%re0 > ################################## > # route -n show -inet6 > Routing tables > > Internet6: > Destination Gateway Flags > Refs Use Mtu Prio Iface > default fe80::5604:a6ff:feb4:99c2%re0 UGS > 4 63 - 8 re0 > ::/96 ::1 UGRS > 0 0 32768 8 lo0 > ::/104 ::1 UGRS > 0 0 32768 8 lo0 > ::1 ::1 UHhl > 14 28 32768 1 lo0 > ::127.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::224.0.0.0/100 ::1 UGRS > 0 0 32768 8 lo0 > ::255.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::ffff:0.0.0.0/96 ::1 UGRS > 0 0 32768 8 lo0 > 2002::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:7f00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:e000::/20 ::1 UGRS > 0 0 32768 8 lo0 > 2002:ff00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::2 UCPn > 0 3 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::157:76 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::37:253 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::/64 2a01:4f8:160:4346::157:80 UCPn > 0 0 - 4 re0 > 2a01:4f8:160:4346::2 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > 2a01:4f8:160:4346::37:253 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > 2a01:4f8:160:4346::157:76 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > 2a01:4f8:160:4346::157:80 54:04:a6:b4:99:c2 UHLl > 0 0 - 1 re0 > fe80::/10 ::1 UGRS > 0 1 32768 8 lo0 > fec0::/10 ::1 UGRS > 0 0 32768 8 lo0 > fe80::%re0/64 fe80::5604:a6ff:feb4:99c2%re0 UCn > 1 0 - 4 re0 > fe80::1%re0 78:fe:3d:46:ed:9d UHLc > 0 3 - 4 re0 > fe80::5604:a6ff:feb4:99c2%re0 54:04:a6:b4:99:c2 UHLhl > 1 13 - 1 re0 > fe80::1%lo0 fe80::1%lo0 UHl > 0 0 32768 1 lo0 > ff01::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff01::%re0/32 fe80::5604:a6ff:feb4:99c2%re0 Um > 0 4 - 4 re0 > ff01::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > ff02::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff02::%re0/32 fe80::5604:a6ff:feb4:99c2%re0 Um > 0 5 - 4 re0 > ff02::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > > > ==> with new hostname.re0 > # ping6 google.com > PING google.com (2a00:1450:4001:81b::200e): 56 data bytes > ^C > --- google.com ping statistics --- > 4 packets transmitted, 0 packets received, 100.0% packet loss > > then: > > # ping6 fe80::5604:a6ff:feb4:99c2%re0 > PING fe80::5604:a6ff:feb4:99c2%re0 (fe80::5604:a6ff:feb4:99c2%re0): 56 > data bytes > 64 bytes from fe80::5604:a6ff:feb4:99c2%re0: icmp_seq=0 hlim=64 > time=0.054 ms > > then still no external ipv6: > > # ping6 google.com > PING google.com (2a00:1450:4001:815::200e): 56 data bytes > ^C > --- google.com ping statistics --- > > 15 packets transmitted, 0 packets received, 100.0% packet loss > > > Hetzner advice to IPv6 > ################################## > https://wiki.hetzner.de/index.php/Zusaetzliche_IP-Adressen/en > ...For IPv6 on dedicated servers and virtual servers from the CX line, > the gateway is fe80::1. Since this is a link-local address, the explicit > specification of the network adapter (usually eth0) is necessary: > # ip route add default via fe80::1 dev eth0 > > > Am 21.09.2016 um 10:00 schrieb Martin Pieuchot: > > On 20/09/16(Tue) 19:17, Heiko Zimmermann wrote: > >> Hello Martin. > >> > >> I updated cvs. ipv6 from and to external is broken. > >> internal ping6 is ok. > >> > >> I stept back 5 days, but all the same. I built a 6.0 stable kernel and > >> bootet again, there is all ok. (to be sure that is not the Provider and > >> not the Hardware) > > > > How does the routing table look in 6.0? I'm interested in the route to > > fe80::1%re0 which seems to be the problem. > > > > Can you also try using 'fe80::5604:a6ff:feb4:99c2%re0' as gateway for > > your default route, does that work? > > > >> I cant say what exactly the cvs date is, when its broken :/ > >> > >> But here are som infos for you: > >> > >> ------------------------------------------------------------------------ > >> # cat /etc/hostname.re0 > >> inet 176.9.157.76 255.255.255.224 > >> inet alias 88.198.37.253 255.255.255.248 > >> inet alias 176.9.157.80 > >> !route add 88.198.37.249 88.198.37.253 > >> inet6 2a01:4f8:160:4346::2 64 > >> inet6 alias 2a01:4f8:160:4346::157:76 64 > >> inet6 alias 2a01:4f8:160:4346::37:253 64 > >> inet6 alias 2a01:4f8:160:4346::157:80 64 > >> !route add -inet6 default fe80::1%re0 > >> > >> ------------------------------------------------------------------------ > >> # ifconfig -A > >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768 > >> index 3 priority 0 llprio 3 > >> groups: lo > >> inet6 ::1 prefixlen 128 > >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > >> inet 127.0.0.1 netmask 0xff000000 > >> re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > >> lladdr 54:04:a6:b4:99:c2 > >> index 1 priority 0 llprio 3 > >> groups: egress > >> media: Ethernet autoselect (1000baseT full-duplex) > >> status: active > >> inet 176.9.157.76 netmask 0xffffffe0 broadcast 176.9.157.95 > >> inet 88.198.37.253 netmask 0xfffffff8 broadcast 88.198.37.255 > >> inet 176.9.157.80 netmask 0xffff0000 broadcast 176.9.255.255 > >> inet6 fe80::5604:a6ff:feb4:99c2%re0 prefixlen 64 scopeid 0x1 > >> inet6 2a01:4f8:160:4346::2 prefixlen 64 > >> inet6 2a01:4f8:160:4346::157:76 prefixlen 64 > >> inet6 2a01:4f8:160:4346::37:253 prefixlen 64 > >> > >> > >> inet6 2a01:4f8:160:4346::157:80 prefixlen 64 > >> > >> > >> enc0: flags=0<> > >> > >> > >> index 2 priority 0 llprio 3 > >> > >> > >> groups: enc > >> > >> > >> status: active > >> > >> > >> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144 > >> > >> > >> index 4 priority 0 llprio 3 > >> > >> > >> groups: pflog > >> > >> > >> ------------------------------------------------------------------------ > >> # Gateway > >> # ping6 -c5 fe80::1%re0 > >> PING fe80::1%re0 (fe80::1%re0): 56 data bytes > >> ^C > >> --- fe80::1%re0 ping statistics --- > >> 5 packets transmitted, 0 packets received, 100.0% packet loss > >> > >> ------------------------------------------------------------------------ > >> # own IP > >> # ping6 2a01:4f8:160:4346::157:76 > >> PING 2a01:4f8:160:4346::157:76 (2a01:4f8:160:4346::157:76): 56 data bytes > >> 64 bytes from 2a01:4f8:160:4346::157:76: icmp_seq=0 hlim=64 time=0.094 ms > >> > >> ------------------------------------------------------------------------ > >> # externel > >> # ping6 google.com > >> PING google.com (2a00:1450:4001:81b::200e): 56 data bytes > >> --- google.com ping statistics --- > >> 7 packets transmitted, 0 packets received, 100.0% packet loss > >> > >> ------------------------------------------------------------------------ > >> > >> # route show > >> Routing tables > >> > >> Internet: > >> Destination Gateway Flags Refs Use Mtu Prio > >> Iface > >> default static.65.157.9.17 UGS 18 1380 - 8 > >> re0 > >> BASE-ADDRESS.MCAST localhost URS 0 0 32768 8 > >> lo0 > >> static.88-198-37-2 www.heiko-zimmerma UCn 0 0 - 4 > >> re0 > >> static.88-198-37-2 www.heiko-zimmerma UGHS 0 0 - 8 > >> re0 > >> www.heiko-zimmerma 54:04:a6:b4:99:c2 UHLhl 1 111 - 1 > >> re0 > >> static.88-198-37-2 www.heiko-zimmerma UHb 0 0 - 1 > >> re0 > >> loopback localhost UGRS 0 0 32768 8 > >> lo0 > >> localhost localhost UHhl 6 11874 32768 1 > >> lo0 > >> static.0.0.9.176.c smtp.de.boilingpoi UCn 0 0 - 4 > >> re0 > >> static.64.157.9.17 atarax UCn 1 3 - 4 > >> re0 > >> static.65.157.9.17 78:fe:3d:46:ed:9d UHLch 1 10 - 4 > >> re0 > >> atarax 54:04:a6:b4:99:c2 UHLl 2 1560 - 1 > >> re0 > >> smtp.de.boilingpoi 54:04:a6:b4:99:c2 UHLl 0 277 - 1 > >> re0 > >> static.95.157.9.17 atarax UHb 0 0 - 1 > >> re0 > >> static.255.255.9.1 smtp.de.boilingpoi UHb 0 0 - 1 > >> re0 > >> > >> Internet6: > >> Destination Gateway Flags Refs Use Mtu Prio > >> Iface > >> default fe80::1%re0 UGS 6 188 - 8 > >> re0 > >> ::/96 localhost UGRS 0 0 32768 8 > >> lo0 > >> ::/104 localhost UGRS 0 0 32768 8 > >> lo0 > >> localhost localhost UHhl 14 28 32768 1 > >> lo0 > >> ::127.0.0.0/104 localhost UGRS 0 0 32768 8 > >> lo0 > >> ::224.0.0.0/100 localhost UGRS 0 0 32768 8 > >> lo0 > >> ::255.0.0.0/104 localhost UGRS 0 0 32768 8 > >> lo0 > >> ::ffff:0.0.0.0/96 localhost UGRS 0 0 32768 8 > >> lo0 > >> 2002::/24 localhost UGRS 0 0 32768 8 > >> lo0 > >> 2002:7f00::/24 localhost UGRS 0 0 32768 8 > >> lo0 > >> 2002:e000::/20 localhost UGRS 0 0 32768 8 > >> lo0 > >> 2002:ff00::/24 localhost UGRS 0 0 32768 8 > >> lo0 > >> 2a01:4f8:160:4346: 2a01:4f8:160:4346: UCPn 0 3 - 4 > >> re0 > >> 2a01:4f8:160:4346: atarax.de.boilingp UCPn 0 0 - 4 > >> re0 > >> 2a01:4f8:160:4346: w3.de.boilingpoint UCPn 0 0 - 4 > >> re0 > >> 2a01:4f8:160:4346: smtp.de.boilingpoi UCPn 0 0 - 4 > >> re0 > >> 2a01:4f8:160:4346: 54:04:a6:b4:99:c2 UHLl 0 0 - 1 > >> re0 > >> w3.de.boilingpoint 54:04:a6:b4:99:c2 UHLl 0 0 - 1 > >> re0 > >> atarax.de.boilingp 54:04:a6:b4:99:c2 UHLl 0 150 - 1 > >> re0 > >> smtp.de.boilingpoi 54:04:a6:b4:99:c2 UHLl 0 36 - 1 > >> re0 > >> fe80::/10 localhost UGRS 0 1 32768 8 > >> lo0 > >> fec0::/10 localhost UGRS 0 0 32768 8 > >> lo0 > >> fe80::%re0/64 fe80::5604:a6ff:fe UCn 1 0 - 4 > >> re0 > >> fe80::1%re0 link#1 UHLch 1 5 - 4 > >> re0 > >> fe80::5604:a6ff:fe 54:04:a6:b4:99:c2 UHLl 0 0 - 1 > >> re0 > >> fe80::1%lo0 fe80::1%lo0 UHl 0 0 32768 1 > >> lo0 > >> ff01::/16 localhost UGRS 0 1 32768 8 > >> lo0 > >> ff01::%re0/32 fe80::5604:a6ff:fe Um 0 4 - 4 > >> re0 > >> ff01::%lo0/32 localhost Um 0 1 32768 4 > >> lo0 > >> ff02::/16 localhost UGRS 0 1 32768 8 > >> lo0 > >> ff02::%re0/32 fe80::5604:a6ff:fe Um 0 4 - 4 > >> re0 > >> ff02::%lo0/32 localhost Um 0 1 32768 4 > >> lo0 > >> > >> ------------------------------------------------------------------------ > >> > >> > >> dmesg.txt attached > >> ------------------------------------------------------------------------ > >> > >> What else shall I provide to you? > >> > >> Thank you in advance. > >> Heiko > > > >> OpenBSD 6.0-current (GENERIC.MP) #26: Tue Sep 20 14:44:16 CEST 2016 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 17071517696 (16280MB) > >> avail mem = 16549638144 (15782MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb170 (107 entries) > >> bios0: vendor American Megatrends Inc. version "1106" date 10/17/2011 > >> bios0: ASUSTeK Computer INC. P8H67-M PRO > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S1 S3 S4 S5 > >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET > >> acpi0: wakeup devices PS2K(S4) BR20(S3) EUSB(S4) USBE(S4) P0P3(S4) > >> P0P4(S4) P0P1(S4) P0P2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > >> PEX5(S4) PEX6(S4) PEX7(S4) [...] > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.92 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 100MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > >> cpu1 at mainbus0: apid 2 (application processor) > >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 0, core 1, package 0 > >> cpu2 at mainbus0: apid 4 (application processor) > >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 2, package 0 > >> cpu3 at mainbus0: apid 6 (application processor) > >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 0, core 3, package 0 > >> cpu4 at mainbus0: apid 1 (application processor) > >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu4: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu4: 256KB 64b/line 8-way L2 cache > >> cpu4: smt 1, core 0, package 0 > >> cpu5 at mainbus0: apid 3 (application processor) > >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu5: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu5: 256KB 64b/line 8-way L2 cache > >> cpu5: smt 1, core 1, package 0 > >> cpu6 at mainbus0: apid 5 (application processor) > >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu6: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu6: 256KB 64b/line 8-way L2 cache > >> cpu6: smt 1, core 2, package 0 > >> cpu7 at mainbus0: apid 7 (application processor) > >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu7: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu7: 256KB 64b/line 8-way L2 cache > >> cpu7: smt 1, core 3, package 0 > >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P3) > >> acpiprt2 at acpi0: bus -1 (P0P4) > >> acpiprt3 at acpi0: bus 1 (P0P1) > >> acpiprt4 at acpi0: bus -1 (P0P2) > >> acpiprt5 at acpi0: bus 2 (PEX0) > >> acpiprt6 at acpi0: bus -1 (PEX1) > >> acpiprt7 at acpi0: bus -1 (PEX2) > >> acpiprt8 at acpi0: bus -1 (PEX3) > >> acpiprt9 at acpi0: bus -1 (PEX4) > >> acpiprt10 at acpi0: bus -1 (PEX5) > >> acpiprt11 at acpi0: bus 3 (PEX6) > >> acpiprt12 at acpi0: bus 5 (BR19) > >> acpicpu0 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu1 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu2 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu3 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu4 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu5 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu6 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu7 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> "PNP0303" at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> acpibtn0 at acpi0: PWRB > >> "PNP0C14" at acpi0 not configured > >> acpivideo0 at acpi0: GFX0 > >> acpivout0 at acpivideo0: DD02 > >> cpu0: Enhanced SpeedStep 3411 MHz: speeds: 3401, 3400, 3300, 3200, 3100, > >> 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > >> pci1 at ppb0 bus 1 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1024x768 > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci3 at ppb2 bus 3 > >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > >> (0x2c00), msi, address 54:04:a6:b4:99:c2 > >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > >> ppb3 at pci0 dev 28 function 7 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi > >> pci4 at ppb3 bus 4 > >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 > >> pci5 at ppb4 bus 5 > >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb1 at ehci1: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 6.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee65b112255 > >> sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee605bb72f5 > >> sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > >> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 > >> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > >> lm1 at wbsio0 port 0x290/8: NCT6776F > >> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > >> fixed > >> sd2: 2097148MB, 512 bytes/sector, 4294961093 sectors > >> root on sd2a (ac86ae3fdac21ffb.a) swap on sd2b dump on sd2b > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sorwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> splassert: sowwakeup: want 5 have 0 > >> syncing disks... done > >> sd2 detached > >> rebooting.. > >> OpenBSD 6.0-current (GENERIC.MP) #0: Tue Sep 20 17:03:34 CEST 2016 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 17071517696 (16280MB) > >> avail mem = 16549658624 (15782MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb170 (107 entries) > >> bios0: vendor American Megatrends Inc. version "1106" date 10/17/2011 > >> bios0: ASUSTeK Computer INC. P8H67-M PRO > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S1 S3 S4 S5 > >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET > >> acpi0: wakeup devices PS2K(S4) BR20(S3) EUSB(S4) USBE(S4) P0P3(S4) > >> P0P4(S4) P0P1(S4) P0P2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > >> PEX5(S4) PEX6(S4) PEX7(S4) [...] > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.92 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 100MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > >> cpu1 at mainbus0: apid 2 (application processor) > >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 0, core 1, package 0 > >> cpu2 at mainbus0: apid 4 (application processor) > >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 2, package 0 > >> cpu3 at mainbus0: apid 6 (application processor) > >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 0, core 3, package 0 > >> cpu4 at mainbus0: apid 1 (application processor) > >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu4: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu4: 256KB 64b/line 8-way L2 cache > >> cpu4: smt 1, core 0, package 0 > >> cpu5 at mainbus0: apid 3 (application processor) > >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu5: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu5: 256KB 64b/line 8-way L2 cache > >> cpu5: smt 1, core 1, package 0 > >> cpu6 at mainbus0: apid 5 (application processor) > >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu6: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu6: 256KB 64b/line 8-way L2 cache > >> cpu6: smt 1, core 2, package 0 > >> cpu7 at mainbus0: apid 7 (application processor) > >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu7: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu7: 256KB 64b/line 8-way L2 cache > >> cpu7: smt 1, core 3, package 0 > >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P3) > >> acpiprt2 at acpi0: bus -1 (P0P4) > >> acpiprt3 at acpi0: bus 1 (P0P1) > >> acpiprt4 at acpi0: bus -1 (P0P2) > >> acpiprt5 at acpi0: bus 2 (PEX0) > >> acpiprt6 at acpi0: bus -1 (PEX1) > >> acpiprt7 at acpi0: bus -1 (PEX2) > >> acpiprt8 at acpi0: bus -1 (PEX3) > >> acpiprt9 at acpi0: bus -1 (PEX4) > >> acpiprt10 at acpi0: bus -1 (PEX5) > >> acpiprt11 at acpi0: bus 3 (PEX6) > >> acpiprt12 at acpi0: bus 5 (BR19) > >> acpicpu0 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu1 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu2 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu3 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu4 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu5 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu6 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu7 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> "PNP0303" at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> acpibtn0 at acpi0: PWRB > >> "PNP0C14" at acpi0 not configured > >> acpivideo0 at acpi0: GFX0 > >> acpivout0 at acpivideo0: DD02 > >> cpu0: Enhanced SpeedStep 3411 MHz: speeds: 3401, 3400, 3300, 3200, 3100, > >> 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > >> pci1 at ppb0 bus 1 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1024x768 > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci3 at ppb2 bus 3 > >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > >> (0x2c00), msi, address 54:04:a6:b4:99:c2 > >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > >> ppb3 at pci0 dev 28 function 7 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi > >> pci4 at ppb3 bus 4 > >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 > >> pci5 at ppb4 bus 5 > >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb1 at ehci1: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 6.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee65b112255 > >> sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee605bb72f5 > >> sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > >> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 > >> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > >> lm1 at wbsio0 port 0x290/8: NCT6776F > >> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > >> fixed > >> sd2: 2097148MB, 512 bytes/sector, 4294961093 sectors > >> root on sd2a (ac86ae3fdac21ffb.a) swap on sd2b dump on sd2b > >> OpenBSD 6.0-current (GENERIC.MP) #0: Tue Sep 20 17:03:34 CEST 2016 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 17071517696 (16280MB) > >> avail mem = 16549658624 (15782MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb170 (107 entries) > >> bios0: vendor American Megatrends Inc. version "1106" date 10/17/2011 > >> bios0: ASUSTeK Computer INC. P8H67-M PRO > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S1 S3 S4 S5 > >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET > >> acpi0: wakeup devices PS2K(S4) BR20(S3) EUSB(S4) USBE(S4) P0P3(S4) > >> P0P4(S4) P0P1(S4) P0P2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > >> PEX5(S4) PEX6(S4) PEX7(S4) [...] > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3412.00 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 100MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > >> cpu1 at mainbus0: apid 2 (application processor) > >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 0, core 1, package 0 > >> cpu2 at mainbus0: apid 4 (application processor) > >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 2, package 0 > >> cpu3 at mainbus0: apid 6 (application processor) > >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 0, core 3, package 0 > >> cpu4 at mainbus0: apid 1 (application processor) > >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu4: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu4: 256KB 64b/line 8-way L2 cache > >> cpu4: smt 1, core 0, package 0 > >> cpu5 at mainbus0: apid 3 (application processor) > >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu5: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu5: 256KB 64b/line 8-way L2 cache > >> cpu5: smt 1, core 1, package 0 > >> cpu6 at mainbus0: apid 5 (application processor) > >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu6: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu6: 256KB 64b/line 8-way L2 cache > >> cpu6: smt 1, core 2, package 0 > >> cpu7 at mainbus0: apid 7 (application processor) > >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu7: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu7: 256KB 64b/line 8-way L2 cache > >> cpu7: smt 1, core 3, package 0 > >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P3) > >> acpiprt2 at acpi0: bus -1 (P0P4) > >> acpiprt3 at acpi0: bus 1 (P0P1) > >> acpiprt4 at acpi0: bus -1 (P0P2) > >> acpiprt5 at acpi0: bus 2 (PEX0) > >> acpiprt6 at acpi0: bus -1 (PEX1) > >> acpiprt7 at acpi0: bus -1 (PEX2) > >> acpiprt8 at acpi0: bus -1 (PEX3) > >> acpiprt9 at acpi0: bus -1 (PEX4) > >> acpiprt10 at acpi0: bus -1 (PEX5) > >> acpiprt11 at acpi0: bus 3 (PEX6) > >> acpiprt12 at acpi0: bus 5 (BR19) > >> acpicpu0 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu1 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu2 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu3 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu4 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu5 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu6 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu7 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> "PNP0303" at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> acpibtn0 at acpi0: PWRB > >> "PNP0C14" at acpi0 not configured > >> acpivideo0 at acpi0: GFX0 > >> acpivout0 at acpivideo0: DD02 > >> cpu0: Enhanced SpeedStep 3412 MHz: speeds: 3401, 3400, 3300, 3200, 3100, > >> 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > >> pci1 at ppb0 bus 1 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1024x768 > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci3 at ppb2 bus 3 > >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > >> (0x2c00), msi, address 54:04:a6:b4:99:c2 > >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > >> ppb3 at pci0 dev 28 function 7 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi > >> pci4 at ppb3 bus 4 > >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 > >> pci5 at ppb4 bus 5 > >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb1 at ehci1: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 6.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee65b112255 > >> sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee605bb72f5 > >> sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > >> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 > >> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > >> lm1 at wbsio0 port 0x290/8: NCT6776F > >> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> softraid0: sd2 was not shutdown properly > >> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > >> fixed > >> sd2: 2097148MB, 512 bytes/sector, 4294961093 sectors > >> root on sd2a (ac86ae3fdac21ffb.a) swap on sd2b dump on sd2b > >> WARNING: / was not properly unmounted > >> uhub4 at uhub3 port 6 configuration 1 interface 0 "Genesys Logic USB2.0 > >> Hub" rev 2.00/77.63 addr 3 > >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev0: iclass 3/1 > >> ukbd0 at uhidev0: 8 variable keys, 6 key codes > >> wskbd1 at ukbd0 mux 1 > >> wskbd1: connecting to wsdisplay0 > >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev1: iclass 3/0, 2 report ids > >> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > >> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > >> uhidev2 at uhub4 port 3 configuration 1 interface 0 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev2: iclass 3/1 > >> ukbd1 at uhidev2: 8 variable keys, 6 key codes > >> wskbd2 at ukbd1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhidev3 at uhub4 port 3 configuration 1 interface 1 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev3: iclass 3/0 > >> ums0 at uhidev3: 3 buttons, Z dir > >> wsmouse0 at ums0 mux 0 > >> /usr/local/bin/python2.7(96576): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(66393): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(41464): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(19628): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(44307): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(37558): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(55571): W^X binary outside wxallowed mountpoint > >> syncing disks... done > >> sd2 detached > >> rebooting.. > >> OpenBSD 6.0-current (GENERIC.MP) #0: Tue Sep 20 17:28:44 CEST 2016 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 17071517696 (16280MB) > >> avail mem = 16549638144 (15782MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb170 (107 entries) > >> bios0: vendor American Megatrends Inc. version "1106" date 10/17/2011 > >> bios0: ASUSTeK Computer INC. P8H67-M PRO > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S1 S3 S4 S5 > >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET > >> acpi0: wakeup devices PS2K(S4) BR20(S3) EUSB(S4) USBE(S4) P0P3(S4) > >> P0P4(S4) P0P1(S4) P0P2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > >> PEX5(S4) PEX6(S4) PEX7(S4) [...] > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.96 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 100MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > >> cpu1 at mainbus0: apid 2 (application processor) > >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 0, core 1, package 0 > >> cpu2 at mainbus0: apid 4 (application processor) > >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 2, package 0 > >> cpu3 at mainbus0: apid 6 (application processor) > >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 0, core 3, package 0 > >> cpu4 at mainbus0: apid 1 (application processor) > >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu4: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu4: 256KB 64b/line 8-way L2 cache > >> cpu4: smt 1, core 0, package 0 > >> cpu5 at mainbus0: apid 3 (application processor) > >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu5: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu5: 256KB 64b/line 8-way L2 cache > >> cpu5: smt 1, core 1, package 0 > >> cpu6 at mainbus0: apid 5 (application processor) > >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu6: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu6: 256KB 64b/line 8-way L2 cache > >> cpu6: smt 1, core 2, package 0 > >> cpu7 at mainbus0: apid 7 (application processor) > >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.50 MHz > >> cpu7: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu7: 256KB 64b/line 8-way L2 cache > >> cpu7: smt 1, core 3, package 0 > >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P3) > >> acpiprt2 at acpi0: bus -1 (P0P4) > >> acpiprt3 at acpi0: bus 1 (P0P1) > >> acpiprt4 at acpi0: bus -1 (P0P2) > >> acpiprt5 at acpi0: bus 2 (PEX0) > >> acpiprt6 at acpi0: bus -1 (PEX1) > >> acpiprt7 at acpi0: bus -1 (PEX2) > >> acpiprt8 at acpi0: bus -1 (PEX3) > >> acpiprt9 at acpi0: bus -1 (PEX4) > >> acpiprt10 at acpi0: bus -1 (PEX5) > >> acpiprt11 at acpi0: bus 3 (PEX6) > >> acpiprt12 at acpi0: bus 5 (BR19) > >> acpicpu0 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu1 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu2 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu3 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu4 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu5 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu6 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu7 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> "PNP0303" at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> acpibtn0 at acpi0: PWRB > >> "PNP0C14" at acpi0 not configured > >> acpivideo0 at acpi0: GFX0 > >> acpivout0 at acpivideo0: DD02 > >> cpu0: Enhanced SpeedStep 3411 MHz: speeds: 3401, 3400, 3300, 3200, 3100, > >> 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > >> pci1 at ppb0 bus 1 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1600x1200 > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci3 at ppb2 bus 3 > >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > >> (0x2c00), msi, address 54:04:a6:b4:99:c2 > >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > >> ppb3 at pci0 dev 28 function 7 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi > >> pci4 at ppb3 bus 4 > >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 > >> pci5 at ppb4 bus 5 > >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb1 at ehci1: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 6.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee65b112255 > >> sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee605bb72f5 > >> sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > >> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 > >> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > >> lm1 at wbsio0 port 0x290/8: NCT6776F > >> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub4 at uhub3 port 6 configuration 1 interface 0 "Genesys Logic USB2.0 > >> Hub" rev 2.00/77.63 addr 3 > >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev0: iclass 3/1 > >> ukbd0 at uhidev0: 8 variable keys, 6 key codes > >> wskbd1 at ukbd0 mux 1 > >> wskbd1: connecting to wsdisplay0 > >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev1: iclass 3/0, 2 report ids > >> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > >> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > >> uhidev2 at uhub4 port 3 configuration 1 interface 0 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev2: iclass 3/1 > >> ukbd1 at uhidev2: 8 variable keys, 6 key codes > >> wskbd2 at ukbd1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhidev3 at uhub4 port 3 configuration 1 interface 1 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev3: iclass 3/0 > >> ums0 at uhidev3: 3 buttons, Z dir > >> wsmouse0 at ums0 mux 0 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > >> fixed > >> sd2: 2097148MB, 512 bytes/sector, 4294961093 sectors > >> root on sd2a (ac86ae3fdac21ffb.a) swap on sd2b dump on sd2b > >> /usr/local/bin/python2.7(35028): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(23968): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(54290): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(43364): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(81622): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(66316): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(10751): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(326): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(50146): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(93011): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(84854): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(84882): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(13333): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(74497): W^X binary outside wxallowed mountpoint > >> syncing disks... done > >> sd2 detached > >> rebooting.. > >> OpenBSD 6.0-current (GENERIC.MP) #0: Tue Sep 20 17:28:44 CEST 2016 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 17071517696 (16280MB) > >> avail mem = 16549638144 (15782MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb170 (107 entries) > >> bios0: vendor American Megatrends Inc. version "1106" date 10/17/2011 > >> bios0: ASUSTeK Computer INC. P8H67-M PRO > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S1 S3 S4 S5 > >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET > >> acpi0: wakeup devices PS2K(S4) BR20(S3) EUSB(S4) USBE(S4) P0P3(S4) > >> P0P4(S4) P0P1(S4) P0P2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > >> PEX5(S4) PEX6(S4) PEX7(S4) [...] > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3412.05 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 100MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > >> cpu1 at mainbus0: apid 2 (application processor) > >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 0, core 1, package 0 > >> cpu2 at mainbus0: apid 4 (application processor) > >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 2, package 0 > >> cpu3 at mainbus0: apid 6 (application processor) > >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 0, core 3, package 0 > >> cpu4 at mainbus0: apid 1 (application processor) > >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu4: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu4: 256KB 64b/line 8-way L2 cache > >> cpu4: smt 1, core 0, package 0 > >> cpu5 at mainbus0: apid 3 (application processor) > >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu5: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu5: 256KB 64b/line 8-way L2 cache > >> cpu5: smt 1, core 1, package 0 > >> cpu6 at mainbus0: apid 5 (application processor) > >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu6: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu6: 256KB 64b/line 8-way L2 cache > >> cpu6: smt 1, core 2, package 0 > >> cpu7 at mainbus0: apid 7 (application processor) > >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.48 MHz > >> cpu7: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu7: 256KB 64b/line 8-way L2 cache > >> cpu7: smt 1, core 3, package 0 > >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P3) > >> acpiprt2 at acpi0: bus -1 (P0P4) > >> acpiprt3 at acpi0: bus 1 (P0P1) > >> acpiprt4 at acpi0: bus -1 (P0P2) > >> acpiprt5 at acpi0: bus 2 (PEX0) > >> acpiprt6 at acpi0: bus -1 (PEX1) > >> acpiprt7 at acpi0: bus -1 (PEX2) > >> acpiprt8 at acpi0: bus -1 (PEX3) > >> acpiprt9 at acpi0: bus -1 (PEX4) > >> acpiprt10 at acpi0: bus -1 (PEX5) > >> acpiprt11 at acpi0: bus 3 (PEX6) > >> acpiprt12 at acpi0: bus 5 (BR19) > >> acpicpu0 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu1 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu2 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu3 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu4 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu5 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu6 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu7 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> "PNP0303" at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> acpibtn0 at acpi0: PWRB > >> "PNP0C14" at acpi0 not configured > >> acpivideo0 at acpi0: GFX0 > >> acpivout0 at acpivideo0: DD02 > >> cpu0: Enhanced SpeedStep 3412 MHz: speeds: 3401, 3400, 3300, 3200, 3100, > >> 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > >> pci1 at ppb0 bus 1 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1600x1200 > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci3 at ppb2 bus 3 > >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > >> (0x2c00), msi, address 54:04:a6:b4:99:c2 > >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > >> ppb3 at pci0 dev 28 function 7 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi > >> pci4 at ppb3 bus 4 > >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 > >> pci5 at ppb4 bus 5 > >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb1 at ehci1: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 6.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee65b112255 > >> sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee605bb72f5 > >> sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > >> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 > >> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > >> lm1 at wbsio0 port 0x290/8: NCT6776F > >> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub4 at uhub3 port 6 configuration 1 interface 0 "Genesys Logic USB2.0 > >> Hub" rev 2.00/77.63 addr 3 > >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev0: iclass 3/1 > >> ukbd0 at uhidev0: 8 variable keys, 6 key codes > >> wskbd1 at ukbd0 mux 1 > >> wskbd1: connecting to wsdisplay0 > >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev1: iclass 3/0, 2 report ids > >> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > >> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > >> uhidev2 at uhub4 port 3 configuration 1 interface 0 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev2: iclass 3/1 > >> ukbd1 at uhidev2: 8 variable keys, 6 key codes > >> wskbd2 at ukbd1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhidev3 at uhub4 port 3 configuration 1 interface 1 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev3: iclass 3/0 > >> ums0 at uhidev3: 3 buttons, Z dir > >> wsmouse0 at ums0 mux 0 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > >> fixed > >> sd2: 2097148MB, 512 bytes/sector, 4294961093 sectors > >> root on sd2a (ac86ae3fdac21ffb.a) swap on sd2b dump on sd2b > >> wskbd2: disconnecting from wsdisplay0 > >> wskbd2 detached > >> ukbd1 detached > >> uhidev2 detached > >> wsmouse0 detached > >> ums0 detached > >> uhidev3 detached > >> uhidev2 at uhub4 port 3 configuration 1 interface 0 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev2: iclass 3/1 > >> ukbd1 at uhidev2: 8 variable keys, 6 key codes > >> wskbd2 at ukbd1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhidev3 at uhub4 port 3 configuration 1 interface 1 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev3: iclass 3/0 > >> ums0 at uhidev3: 3 buttons, Z dir > >> wsmouse0 at ums0 mux 0 > >> wskbd2: disconnecting from wsdisplay0 > >> wskbd2 detached > >> ukbd1 detached > >> uhidev2 detached > >> wsmouse0 detached > >> ums0 detached > >> uhidev3 detached > >> uhidev2 at uhub4 port 3 configuration 1 interface 0 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev2: iclass 3/1 > >> ukbd1 at uhidev2: 8 variable keys, 6 key codes > >> wskbd2 at ukbd1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhidev3 at uhub4 port 3 configuration 1 interface 1 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev3: iclass 3/0 > >> ums0 at uhidev3: 3 buttons, Z dir > >> wsmouse0 at ums0 mux 0 > >> /usr/local/bin/python2.7(45873): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(65755): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(93642): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(83300): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(62566): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(27319): W^X binary outside wxallowed mountpoint > >> /usr/local/bin/python2.7(82200): W^X binary outside wxallowed mountpoint > >> syncing disks... done > >> sd2 detached > >> rebooting.. > >> OpenBSD 6.0-current (GENERIC.MP) #1: Tue Sep 20 19:10:59 CEST 2016 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 17071517696 (16280MB) > >> avail mem = 16549638144 (15782MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb170 (107 entries) > >> bios0: vendor American Megatrends Inc. version "1106" date 10/17/2011 > >> bios0: ASUSTeK Computer INC. P8H67-M PRO > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S1 S3 S4 S5 > >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET > >> acpi0: wakeup devices PS2K(S4) BR20(S3) EUSB(S4) USBE(S4) P0P3(S4) > >> P0P4(S4) P0P1(S4) P0P2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > >> PEX5(S4) PEX6(S4) PEX7(S4) [...] > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.98 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 100MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > >> cpu1 at mainbus0: apid 2 (application processor) > >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 0, core 1, package 0 > >> cpu2 at mainbus0: apid 4 (application processor) > >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 2, package 0 > >> cpu3 at mainbus0: apid 6 (application processor) > >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 0, core 3, package 0 > >> cpu4 at mainbus0: apid 1 (application processor) > >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu4: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu4: 256KB 64b/line 8-way L2 cache > >> cpu4: smt 1, core 0, package 0 > >> cpu5 at mainbus0: apid 3 (application processor) > >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu5: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu5: 256KB 64b/line 8-way L2 cache > >> cpu5: smt 1, core 1, package 0 > >> cpu6 at mainbus0: apid 5 (application processor) > >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu6: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu6: 256KB 64b/line 8-way L2 cache > >> cpu6: smt 1, core 2, package 0 > >> cpu7 at mainbus0: apid 7 (application processor) > >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.49 MHz > >> cpu7: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > >> cpu7: 256KB 64b/line 8-way L2 cache > >> cpu7: smt 1, core 3, package 0 > >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P3) > >> acpiprt2 at acpi0: bus -1 (P0P4) > >> acpiprt3 at acpi0: bus 1 (P0P1) > >> acpiprt4 at acpi0: bus -1 (P0P2) > >> acpiprt5 at acpi0: bus 2 (PEX0) > >> acpiprt6 at acpi0: bus -1 (PEX1) > >> acpiprt7 at acpi0: bus -1 (PEX2) > >> acpiprt8 at acpi0: bus -1 (PEX3) > >> acpiprt9 at acpi0: bus -1 (PEX4) > >> acpiprt10 at acpi0: bus -1 (PEX5) > >> acpiprt11 at acpi0: bus 3 (PEX6) > >> acpiprt12 at acpi0: bus 5 (BR19) > >> acpicpu0 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu1 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu2 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu3 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu4 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu5 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu6 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> acpicpu7 at acpi0: C3(350@104 mwait.3@0x20), C2(500@80 mwait.3@0x10), > >> C1(1000@1 halt), PSS > >> "PNP0303" at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> acpibtn0 at acpi0: PWRB > >> "PNP0C14" at acpi0 not configured > >> acpivideo0 at acpi0: GFX0 > >> acpivout0 at acpivideo0: DD02 > >> cpu0: Enhanced SpeedStep 3411 MHz: speeds: 3401, 3400, 3300, 3200, 3100, > >> 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > >> pci1 at ppb0 bus 1 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1600x1200 > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci2 at ppb1 bus 2 > >> ppb2 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > >> pci3 at ppb2 bus 3 > >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > >> (0x2c00), msi, address 54:04:a6:b4:99:c2 > >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > >> ppb3 at pci0 dev 28 function 7 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi > >> pci4 at ppb3 bus 4 > >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 > >> pci5 at ppb4 bus 5 > >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > >> 23 > >> usb1 at ehci1: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 6.0Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee65b112255 > >> sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD3000FYYZ-0, 01.0> SCSI3 0/direct > >> fixed naa.50014ee605bb72f5 > >> sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > >> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 > >> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > >> lm1 at wbsio0 port 0x290/8: NCT6776F > >> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.00 addr 2 > >> uhub4 at uhub3 port 6 configuration 1 interface 0 "Genesys Logic USB2.0 > >> Hub" rev 2.00/77.63 addr 3 > >> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev0: iclass 3/1 > >> ukbd0 at uhidev0: 8 variable keys, 6 key codes > >> wskbd1 at ukbd0 mux 1 > >> wskbd1: connecting to wsdisplay0 > >> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Cherry Mikroschalter > >> product 0x0023" rev 2.00/2.20 addr 4 > >> uhidev1: iclass 3/0, 2 report ids > >> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > >> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > >> uhidev2 at uhub4 port 3 configuration 1 interface 0 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev2: iclass 3/1 > >> ukbd1 at uhidev2: 8 variable keys, 6 key codes > >> wskbd2 at ukbd1 mux 1 > >> wskbd2: connecting to wsdisplay0 > >> uhidev3 at uhub4 port 3 configuration 1 interface 1 "Peppercon AG > >> Multidevice" rev 2.00/0.01 addr 5 > >> uhidev3: iclass 3/0 > >> ums0 at uhidev3: 3 buttons, Z dir > >> wsmouse0 at ums0 mux 0 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > >> fixed > >> sd2: 2097148MB, 512 bytes/sector, 4294961093 sectors > >> root on sd2a (ac86ae3fdac21ffb.a) swap on sd2b dump on sd2b > > > > -- > GnuPG: > https://www.intermezzo.de/0x3FF6A527.asc > 1239 3D6C AE13 8CE3 0690 D9D8 4E72 7FA4 3FF6 A527 >
