On Wed, Dec 13, 2017 at 05:27:17PM -0600, C. Turner wrote: > > Hello - > > I am in the process of bringing up a build VM on KVM/Linux to start > some 6.2 upgrades - however the 6.2 release ISO did not yield a > fully functional install on this particular VM (yes, SHA checks > run) - there were various (ignored) CRC errors during the install > unpacking stage as well as SIGFPE of various daemons on boot, login > not passing through to the second step of password, etc. The iso > was also refetched from a different mirror, etc. > > The previous disk image with a stale 6.1-current did work (fpu.c > v1.33.6.1), as well the December 11 snapshot. > > I checked cvsweb and saw there had been some activity in fpu.c, so > I booted from the snapshot, and was able to build a 6.2-current > kernel containing the latest v1.39 of amd64/fpu.c while chrooted into the > 6.2 disk image , which seem to run successfully (none of the boot > errors occur and console login is successful). > > Mentioning here although fixed in the snap this since it seems like > it might be worth reporting. The host processor is an AMD FX-8320E > running KVM (perhaps why it hasn't been reported yet ;), dmesg from > the backported 6.2 boot is attached- let me know if I can provide > or test anything else. > > Thanks, > > - Chris >
Are you saying "it's broken in 6.2-release but fixed in 6.2-current" ? -ml > OpenBSD 6.2-stable (GENERIC.MP) #1: Wed Dec 13 22:22:42 GMT 2017 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2130538496 (2031MB) > avail mem = 2059005952 (1963MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf68c0 (12 entries) > bios0: vendor SeaBIOS version "1.9.3-1.fc25" date 04/01/2014 > bios0: QEMU Standard PC (i440FX + PIIX, 1996) > acpi0 at bios0: rev 0 > acpi0: sleep states S5 > acpi0: tables DSDT FACP APIC > acpi0: wakeup devices > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Opteron 63xx class CPU, 3214.79 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,F16C,HV,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,XOP,FMA4,TBM,BMI1 > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 1000MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Opteron 63xx class CPU, 3214.43 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,F16C,HV,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,XOP,FMA4,TBM,BMI1 > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD Opteron 63xx class CPU, 3214.43 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,F16C,HV,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,XOP,FMA4,TBM,BMI1 > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu2: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu2: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD Opteron 63xx class CPU, 3214.43 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,F16C,HV,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,XOP,FMA4,TBM,BMI1 > cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu3: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu3: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpicpu2 at acpi0: C1(@1 halt!) > acpicpu3 at acpi0: C1(@1 halt!) > "ACPI0006" at acpi0 not configured > "PNP0F13" at acpi0 not configured > "PNP0700" at acpi0 not configured > "PNP0A06" at acpi0 not configured > "PNP0A06" at acpi0 not configured > "PNP0A06" at acpi0 not configured > "QEMU0002" at acpi0 not configured > pvbus0 at mainbus0: KVM > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 > wired to compatibility, channel 1 wired to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > pciide0: channel 1 disabled (no drives) > piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9 > iic0 at piixpm0 > vga1 at pci0 dev 2 function 0 "Red Hat QXL Video" rev 0x04 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00 > vio0 at virtio0: address 52:54:10:00:01:72 > virtio0: msix shared > azalia0 at pci0 dev 4 function 0 "Intel 82801FB HD Audio" rev 0x01: apic 0 > int 11 > azalia0: No codecs found > virtio1 at pci0 dev 5 function 0 "Qumranet Virtio Console" rev 0x00 > virtio1: no matching child driver; not configured > uhci0 at pci0 dev 6 function 0 "Intel 82801I USB" rev 0x03: apic 0 int 10 > uhci1 at pci0 dev 6 function 1 "Intel 82801I USB" rev 0x03: apic 0 int 11 > uhci2 at pci0 dev 6 function 2 "Intel 82801I USB" rev 0x03: apic 0 int 11 > ehci0 at pci0 dev 6 function 7 "Intel 82801I USB" rev 0x03: apic 0 int 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > virtio2 at pci0 dev 7 function 0 "Qumranet Virtio Storage" rev 0x00 > vioblk0 at virtio2 > scsibus2 at vioblk0: 2 targets > sd0 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed > sd0: 40960MB, 512 bytes/sector, 83886080 sectors > virtio2: msix shared > virtio3 at pci0 dev 8 function 0 "Qumranet Virtio Memory" rev 0x00 > viomb0 at virtio3 > virtio3: apic 0 int 11 > virtio4 at pci0 dev 9 function 0 "Qumranet Virtio Storage" rev 0x00 > vioblk1 at virtio4 > scsibus3 at vioblk1: 2 targets > sd1 at scsibus3 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed > sd1: 40960MB, 512 bytes/sector, 83886080 sectors > virtio4: msix shared > isa0 at pcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on sd1a (6c1c635f66a43746.a) swap on sd1b dump on sd1b > fd0 at fdc0 drive 1: density unknown
