Indeed, I was running version, now I'm running a patched stable. ----- Original Message ----- From: "Anton Lindqvist" <[email protected]> To: "regis etourmy" <[email protected]> Cc: "Ulf Brosziewski" <[email protected]>, [email protected] Sent: Saturday, 6 January, 2018 10:22:18 AM Subject: Re: ALPS DualPoint touchpad not recognized on ThinkPad E550
On Sat, Jan 06, 2018 at 01:02:47AM +0100, [email protected] wrote: > Thanks again for your answer. > > I put a printf in pms.c to get the version seen by pms. It is 0x7331, > not at all the version 0x0700 seen by Linux. I added a line with this > version in the alps_model structure, and the kernel now identifies the > model. Looks like you're not running current. An entry for 0x7331 was added back in December by robert@. https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pckbc/pms.c.diff?r1=1.83&r2=1.84&f=h > Also, "pms0: not in sync yet, discard input (state 0)" errors are now > reported by dmesg. > > Just like with Bryan Steele-2's ThinkPad E560: > http://openbsd-archive.7691.n7.nabble.com/touchpad-on-ThinkPad-E560-td333627.html > > ----- Original Message ----- > From: "Ulf Brosziewski" <[email protected]> > To: "regis etourmy" <[email protected]> > Cc: [email protected] > Sent: Thursday, 4 January, 2018 1:24:11 AM > Subject: Re: ALPS DualPoint touchpad not recognized on ThinkPad E550 > > On 01/04/2018 12:23 AM, [email protected] wrote: > > Thanks a lot for your answer. > > > > My patched kernel failed to identify the model... I wasn't quite sure about > > the mask, so I tried a few values. > > Do you know if the ALPS code in pms can support edge scrolling? I saw it > > for Synaptics, but not for ALPS. > > The ALPS code does not report contact counts to the input > drivers - older models didn't recognize more than one. That's > the reason why two-finger scrolling is missing there. Edge > scrolling doesn't need a contact count, so it is supported - if > the model is recognized and it applies one of the ALPS protocols > that pms can handle. Edge scrolling is not enabled automatically > (yet), but that's a minor problem in comparison. > > > > > ----- Original Message ----- > > From: "Ulf Brosziewski" <[email protected]> > > To: "regis etourmy" <[email protected]>, [email protected] > > Sent: Wednesday, 3 January, 2018 11:05:32 PM > > Subject: Re: ALPS DualPoint touchpad not recognized on ThinkPad E550 > > > > Did your patched kernel fail to identify the model, or was it just > > two-finger scrolling that didn't work? The latter isn't available > > anyway (the somewhat outdated ALPS code in pms wouldn't support it). > > > > On 01/03/2018 08:27 PM, [email protected] wrote: > >>> Synopsis: ALPS DualPoint touchpad not recognized on ThinkPad E550 > >>> Category: system kernel amd64 > >>> Environment: > >> System : OpenBSD 6.2 > >> Details : OpenBSD 6.2 (GENERIC.MP) #2: Sun Dec 10 21:14:42 CET 2017 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> > >> Architecture: OpenBSD.amd64 > >> Machine : amd64 > >>> Description: > >> > >> Everything works fine with 6.2 on my ThinkPad E550, except for the > >> touchpad seen as a PS/2 mouses. It works, but I can't scroll with two > >> fingers. > >> > >> Here are the details seen by an Ubuntu 1710: > >> > >> I: Bus=0011 Vendor=0002 Product=0008 Version=0700 > >> N: Name="AlpsPS/2 ALPS DualPoint Stick" > >> P: Phys=isa0060/serio1/input1 > >> S: Sysfs=/devices/platform/i8042/serio1/input/input6 > >> U: Uniq= > >> H: Handlers=mouse0 event4 > >> B: PROP=21 > >> B: EV=7 > >> B: KEY=70000 0 0 0 0 > >> B: REL=3 > >> > >> I: Bus=0011 Vendor=0002 Product=0008 Version=0700 > >> N: Name="AlpsPS/2 ALPS DualPoint TouchPad" > >> P: Phys=isa0060/serio1/input0 > >> S: Sysfs=/devices/platform/i8042/serio1/input/input4 > >> U: Uniq= > >> H: Handlers=mouse1 event5 > >> B: PROP=5 > >> B: EV=b > >> B: KEY=e520 10000 0 0 0 0 > >> B: ABS=260800000000003 > >> > >> As I am really naive, I tried to add a line with version 0x0700 in the > >> alps_model structure, in pms.c, an compilled a new kernel. It wasn't > >> enough, of course. > >> > > > > > >> > >>> How-To-Repeat: > >> > >>> Fix: > >> > >> > >> > >> dmesg: > >> OpenBSD 6.2 (GENERIC.MP) #2: Sun Dec 10 21:14:42 CET 2017 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> real mem = 8486764544 (8093MB) > >> avail mem = 8222527488 (7841MB) > >> mpath0 at root > >> scsibus0 at mpath0: 256 targets > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccdfd000 (62 entries) > >> bios0: vendor LENOVO version "J5ET58WW (1.29 )" date 09/12/2017 > >> bios0: LENOVO 20DFCTO1WW > >> acpi0 at bios0: rev 2 > >> acpi0: sleep states S0 S3 S4 S5 > >> acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT > >> SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI MSDM BATB FPDT UEFI BGRT DMAR > >> acpi0: wakeup devices LID_(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) > >> acpitimer0 at acpi0: 3579545 Hz, 24 bits > >> acpihpet0 at acpi0: 14318179 Hz > >> acpiec0 at acpi0 > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2195.28 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: TSC frequency 2195282520 Hz > >> cpu0: smt 0, core 0, package 0 > >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > >> cpu0: apic clock running at 99MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > >> cpu1 at mainbus0: apid 1 (application processor) > >> cpu1: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz > >> cpu1: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > >> cpu1: 256KB 64b/line 8-way L2 cache > >> cpu1: smt 1, core 0, package 0 > >> cpu2 at mainbus0: apid 2 (application processor) > >> cpu2: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz > >> cpu2: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > >> cpu2: 256KB 64b/line 8-way L2 cache > >> cpu2: smt 0, core 1, package 0 > >> cpu3 at mainbus0: apid 3 (application processor) > >> cpu3: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz > >> cpu3: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT > >> cpu3: 256KB 64b/line 8-way L2 cache > >> cpu3: smt 1, core 1, package 0 > >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > >> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (PEG_) > >> acpiprt2 at acpi0: bus 2 (EXP1) > >> acpiprt3 at acpi0: bus 4 (EXP3) > >> acpiprt4 at acpi0: bus 5 (EXP6) > >> acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > >> C1(1000@1 mwait.1), PSS > >> acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > >> C1(1000@1 mwait.1), PSS > >> acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > >> C1(1000@1 mwait.1), PSS > >> acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > >> C1(1000@1 mwait.1), PSS > >> acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 > >> acpipwrres1 at acpi0: AMD3, resource for PEG_ > >> acpipwrres2 at acpi0: AMD2, resource for PEG_ > >> acpitz0 at acpi0: critical temperature is 127 degC > >> acpibtn0 at acpi0: LID_ > >> "LEN0071" at acpi0 not configured > >> "LEN200C" at acpi0 not configured > >> acpibat0 at acpi0: BAT0 model "LNV-45N1" serial 3167 type LION oem "SANYO" > >> acpiac0 at acpi0: AC unit online > >> acpithinkpad0 at acpi0 > >> "SMO1200" at acpi0 not configured > >> "PNP0C14" at acpi0 not configured > >> "PNP0C14" at acpi0 not configured > >> "PNP0C14" at acpi0 not configured > >> "INT340F" at acpi0 not configured > >> acpivideo0 at acpi0: VID_ > >> acpivout at acpivideo0 not configured > >> acpivideo1 at acpi0: VID_ > >> cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2201, 2200, 2100, 2000, 1800, > >> 1700, 1600, 1500, 1300, 1200, 1100, 1000, 900, 700, 600, 500 MHz > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 > >> drm0 at inteldrm0 > >> inteldrm0: msi > >> inteldrm0: 1920x1080, 32bpp > >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > >> wsdisplay0: screen 1-5 added (std, vt100 emulation) > >> azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > >> xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi > >> usb0 at xhci0: USB revision 3.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > >> 3.00/1.00 addr 1 > >> "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > >> em0 at pci0 dev 25 function 0 "Intel I218-V" rev 0x03: msi, address > >> 68:f7:28:74:db:31 > >> azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi > >> azalia1: codecs: Conexant/0x510f > >> audio0 at azalia1 > >> ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > >> pci1 at ppb0 bus 2 > >> ppb1 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi > >> pci2 at ppb1 bus 4 > >> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3160" rev 0x93, > >> msi > >> ppb2 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > >> pci3 at ppb2 bus 5 > >> rtsx0 at pci3 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi > >> sdmmc0 at rtsx0: 4-bit > >> ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int > >> 23 > >> usb1 at ehci0: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > >> ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI > >> 1.3 > >> ahci0: port 0: 6.0Gb/s > >> ahci0: port 1: 1.5Gb/s > >> scsibus1 at ahci0: 32 targets > >> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TE128, EXT0> SCSI3 0/direct > >> fixed naa.5002538844584d30 > >> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > >> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUA0N, LZ20> ATAPI 5/cdrom > >> removable > >> ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 > >> int 18 > >> iic0 at ichiic0 > >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > >> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > >> pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > >> isa0 at pcib0 > >> isadma0 at isa0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 irq 12 irq 12 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >> pms0 at pckbc0 (aux slot #0) > >> wsmouse0 at pms0 mux 0 > >> pcppi0 at isa0 port 0x61 > >> spkr0 at pcppi0 > >> vmm0 at mainbus0: VMX/EPT > >> efifb at mainbus0 not configured > >> uvideo0 at uhub0 port 8 configuration 1 interface 0 "J8IECN3YB Integrated > >> Camera" rev 2.00/0.07 addr 2 > >> video0 at uvideo0 > >> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > >> Hub" rev 2.00/0.03 addr 2 > >> vscsi0 at root > >> scsibus2 at vscsi0: 256 targets > >> softraid0 at root > >> scsibus3 at softraid0: 256 targets > >> root on sd0a (bdd6b957d42777d3.a) swap on sd0b dump on sd0b > >> iwm0: hw rev 0x160, fw ver 16.242414.0, address d0:7e:35:89:cf:42 > >> > >> usbdevs: > >> [...] > > >
