For the record:  It seems that this touchpad model uses a protocol
that is not supported by pms.  This is not immediately evident
because the hardware sends PS/2-like data via the secondary device
(the primary one is unused).

On 12/27/2017 12:43 AM, Bryan Steele wrote:
> It seems my ThinkPad has the same ALPS touchpad as robert@'s new
> IdeaPad, it started being detected after his commit on Dec 4th:
> 
> Unfortunately it doesn't seem to actually work, unless I'm missing
> something in wsconsctl configuration [0], specifically there is no
> two finger or edge scrolling that I can see..
> 
> https://marc.info/?l=openbsd-cvs&m=151239941306728&w=2
> 
> I didn't notice for awhile because the touchpad mostly works in PS/2
> mode, at least for tap click and movement. There are also physical
> buttons above the touchpad as is typical for ThinkPad's which work
> fine.. except now there are "pms0: not in sync, discard input"
> messages when they are pressed.
> 
> And ideas?
> 
> -Bryan.
> 
> [0] wsconsctl(8) also requires root.. kinda sad, synclient/xinput 
> didn't on other machines. :(
> 
> keyboard.type=pc-xt
> keyboard.bell.pitch=400
> keyboard.bell.period=100
> keyboard.bell.volume=0
> keyboard.bell.pitch.default=400
> keyboard.bell.period.default=100
> keyboard.bell.volume.default=50
> keyboard.repeat.del1=400
> keyboard.repeat.deln=100
> keyboard.repeat.del1.default=400
> keyboard.repeat.deln.default=100
> keyboard.ledstate=0
> keyboard.encoding=us
> mouse.type=alps
> mouse.rawmode=0
> mouse.scale=130,840,130,640,0,0,0
> mouse.tp.tapping=0
> mouse.tp.scaling=1.000
> mouse.tp.swapsides=0
> mouse.tp.disable=0
> mouse1.type=ps2
> display.type=inteldrm
> display.width=1366
> display.height=768
> display.depth=32
> display.emulations=vt100
> display.screentypes=std
> display.focus=4
> display.brightness=100.00%
> display.screen_on=250
> display.screen_off=0
> display.vblank=off
> display.kbdact=on
> display.msact=on
> display.outact=on
> 
> OpenBSD 6.2-current (GENERIC.MP) #307: Sun Dec 24 15:08:11 MST 2017
>     [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 12746055680 (12155MB)
> avail mem = 12352839680 (11780MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xb7c05000 (63 entries)
> bios0: vendor LENOVO version "R00ET57W (1.32 )" date 10/31/2017
> bios0: LENOVO 20EV002FUS
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT ASF! ECDT HPET LPIT APIC MCFG 
> WDAT SSDT DBGP DBG2 BOOT BATB SLIC SSDT SSDT MSDM DMAR FPDT UEFI
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) PXSX(S4) PXSX(S4) PXSX(S4) 
> XHCI(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2195.57 MHz
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 24MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2194.89 MHz
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2194.89 MHz
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 1, core 0, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2194.89 MHz
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus -1 (EXP1)
> acpiprt5 at acpi0: bus 1 (EXP3)
> acpiprt6 at acpi0: bus 2 (EXP6)
> acpiprt7 at acpi0: bus -1 (RP09)
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for XHCI
> acpipwrres1 at acpi0: PG00, resource for PEG0
> acpipwrres2 at acpi0: PG01, resource for PEG1
> acpipwrres3 at acpi0: PG02, resource for PEG2
> acpipwrres4 at acpi0: WRST
> acpitz0 at acpi0: critical temperature is 127 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> "LEN0071" at acpi0 not configured
> "LEN2020" at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "LNV-45N1" serial 22779 type LION oem "LGC"
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10
> acpivideo0 at acpi0: GFX0
> acpivout at acpivideo0 not configured
> cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2301, 2300, 2200, 2100, 2000, 
> 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
> drm0 at inteldrm0
> inteldrm0: msi
> error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load 
> firmware i915/skl_dmc_ver1.bin (-22)
> error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 
> (ignored)
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 
> 1.3.1
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LM021-1KJ15, 0004> SCSI3 0/direct 
> fixed naa.5000c500a81ebc37
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, LC20> ATAPI 5/cdrom 
> removable
> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 1
> iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99, msi
> ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
> pci2 at ppb1 bus 2
> rtsx0 at pci2 dev 0 function 0 "Realtek RTS522A Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0: 4-bit, dma
> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
> azalia0: codecs: Conexant/0x5111, Intel/0x2809, using Conexant/0x5111
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 
> int 16
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi, address 
> c8:5b:76:be:f4:e9
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: ALPS Dualpoint, version 0x7331
> wsmouse1 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> uvideo0 at uhub0 port 7 configuration 1 interface 0 "Chicony Electronics 
> Co.,Ltd. Integrated Camera" rev 2.00/0.09 addr 2
> video0 at uvideo0
> umass0 at uhub0 port 15 configuration 1 interface 0 "asmedia ASMT1051" rev 
> 3.00/1.00 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <ASMT, 2115, 0> SCSI4 0/direct fixed 
> serial.174c55aa1234567899A6
> sd1: 238475MB, 512 bytes/sector, 488397168 sectors
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd1a (76a8b329c317f762.a) swap on sd1b dump on sd1b
> iwm0: hw rev 0x210, fw ver 16.242414.0, address 70:1c:e7:49:ac:d2
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x1)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x4)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0x2)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> pms0: not in sync yet, discard input (state = 0, data = 0)
> 
> 

Reply via email to