I'm running an OpenBSD amd64 guest into an amd64 host. Dmesgs
attached. The VM config is as follow:
vm "qemu" {
memory 128M
disk "/usr/hack/mpi/qemu/amd64/disk.img"
local interface tap0 lladdr 70:5f:ca:21:8d:70
disable
owner mpi
}
I run dhclient(8) and NAT the traffic using IP forwarding on my host.
vmd(8) exited multiple times with the following error:
vmd[98149]: vcpu_run_loop: vm 2 / vcpu 0 run ioctl failed: Invalid argument
The last two times it happened it was at "reboot" time. Once after upgrading
the machine via bsd.rd. After entering "Enter" when asked if I want to reboot
vmd(8) crashed. The second time it happened just after typing 'reboot' in a
ssh session.
OpenBSD 6.2-current (GENERIC.MP) #369: Tue Jan 16 20:06:05 MST 2018
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8238301184 (7856MB)
avail mem = 7981674496 (7611MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries)
bios0: vendor LENOVO version "N14ET26W (1.04 )" date 01/23/2015
bios0: LENOVO 20BS006BGE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2295.08 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 2394465630 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2294.69 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2294.69 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2294.69 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 3 (EXP1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP6)
acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN0048" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "00HW003" serial 887 type LiP oem "SMP"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2401, 2400, 2300, 2100, 2000, 1900,
1700, 1600, 1400, 1300, 1200, 1000, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-V" rev 0x03: msi, address
54:ee:75:43:b3:62
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 3: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG MZNTE256, EXT2> SCSI3 0/direct
fixed naa.5002538844584d30
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
Unclaimed register detected before reading register 0x23a0
umb0 at uhub0 port 4 configuration 1 interface 0 "Sierra Wireless Inc. Sierra
Wireless EM7345 4G LTE" rev 2.00/17.29 addr 2
umodem0 at uhub0 port 4 configuration 1 interface 2 "Sierra Wireless Inc.
Sierra Wireless EM7345 4G LTE" rev 2.00/17.29 addr 2
umodem0: data interface 3, has no CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 3
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics
Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 4
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244190MB, 512 bytes/sector, 500102858 sectors
root on sd1a (72519550243ad631.a) swap on sd1b dump on sd1b
cpu_ucode_setup: no microcode found: intel/06-3d-04
iwm0: hw rev 0x210, fw ver 16.242414.0, address 60:57:18:c1:8b:d5
Google, Inc.
Serial Graphics Adapter 11/27/17
SGABIOS 20100422 (_<vmm@OpenBSD>) Mon Nov 27 22:20:55 UTC 2017
Term: 80x46
4 0
malloc finalize
Space available for UMB: c0000-ef000, f0000-f0a60
Returned 253952 bytes of ZoneHigh
e820 map has 6 items:
0: 0000000000000000 - 000000000009f800 = 1 RAM
1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 0000000007ffe000 = 1 RAM
4: 0000000007ffe000 - 0000000008000000 = 2 RESERVED
5: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
locking shadow ram
Unable to lock ram - bridge not found
Jump to int19
enter handle_19:
NULL
Boooottiinngg ffrroomm HHaarrdd DDiisskk......
Booting from 0000:7c00
Using drive 0, partition 3.
Loading.....
probing: pc0enter handle_11:
a=000421e1 b=00000001 c=00053df0 d=00000030 ds=0000 es=0000 ss=0000
si=00053e10 di=00053e10 bp=0000ff9c sp=0000ff52 cs=4012 ip=1753 f=0246
com0 mem[638K 126M a20=on]
disk:invalid handle_legacy_disk:729:
a=00000000 b=00000000 c=000001d4 d=00000000 ds=0000 es=5557 ss=0000
si=00055a94 di=00000000 bp=0000fd88 sp=0000fd3e cs=4012 ip=1753 f=0246
invalid handle_legacy_disk:729:
a=00000800 b=00000000 c=000001d4 d=00000000 ds=0000 es=5557 ss=0000
si=00000001 di=00000000 bp=0000fd88 sp=0000fd3e cs=4012 ip=1753 f=0246
hd0+
>> OpenBSD/amd64 BOOT 3.33
switching console to com0
>> OpenBSD/amd64 BOOT 3.33
boot>
booting hd0a:/bsd: 8488755+2438160+240976+0+663552 [644238+90+705912+488906]=0xd
0b338
entry point at 0x1000158
[ using 1839928 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.2-current (GENERIC) #364: Tue Jan 16 20:01:45 MST 2018
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 117432320 (111MB)
avail mem = 107167744 (102MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2398.33 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,F
XSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AV
X,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,AVX2
,SMEP,BMI2,ERMS,RDSEED,ADX,SMAP
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
pvbus0 at mainbus0: OpenBSD
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus1 at vioblk0: 2 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 3072MB, 512 bytes/sector, 6291456 sectors
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio2: address 70:5f:ca:21:8d:70
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00
vmmci0 at virtio3
virtio3: irq 7
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
com0: console
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7384820eb6b7f93a.a) swap on sd0b dump on sd0b
